BIS IS 1489-1 : 2015
Current
The latest, up-to-date edition.
PORTLAND POZZOLANA CEMENT - SPECIFICATION - PART 1: FLY ASH BASED
01-12-2013
FOREWORD
1 SCOPE
2 REFERENCES
3 TERMINOLOGY
4 RAW MATERIAL
5 MANUFACTURE
6 CHEMICAL REQUIREMENTS
7 PHYSICAL REQUIREMENTS
8 STORAGE
9 MANUFACTURER'S CERTIFICATE
10 PACKING
11 MARKING
12 SAMPLING
13 TESTS
14 REJECTION
ANNEX A - LIST OF REFERRED STANDARDS
ANNEX B - TOLERANCE REQUIREMENTS FOR THE QUANTITY OF
CEMENT PACKED IN BAGS
ANNEX C - COMMITTEE COMPOSITION
Includes the manufacture and chemical and physical requirements of Portland pozzolana cement using fly ash as pozzolana.
| Committee |
CED 2
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| BIS IS 2911-1-4 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 4: PRECAST CONCRETE PILES IN PREBORED HOLES |
| BIS IS 7113 : 2003(R2017) | SOIL-CEMENT LINING FOR CANALS - CODE OF PRACTICE |
| IS 2645 : 2003(R2017) | INTEGRAL WATERPROOFING COMPOUNDS FOR CEMENT MORTAR AND CONCRETE - SPECIFICATION |
| BIS IS 15663-1 : 2006(R2011) | DESIGN AND INSTALLATION OF NATURAL GAS PIPELINES - CODE OF PRACTICE - PART 1: LAYING OF PIPELINES |
| BIS IS 2911-1-3 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 3: DRIVEN PRECAST CONCRETE PILES |
| BIS IS 1343 : 2012 | PRESTRESSED CONCRETE - CODE OF PRACTICE - SECTION 1: GENERAL |
| BIS IS 2911-1-1 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 1: DRIVEN CAST IN-SITU CONCRETE PILES |
| BIS IS 3370-1 : 2009 | CONCRETE STRUCTURES FOR STORAGE OF LIQUIDS - CODE OF PRACTICE - PART 1: GENERAL REQUIREMENTS |
| BIS IS 2185-4 : 2008 | CONCRETE MASONRY UNITS - SPECIFICATION - PART 4: PREFORMED FOAM CELLULAR CONCRETE BLOCKS |
| BIS IS 456 : 2000(R2016) | PLAIN AND REINFORCED CONCRETE CODE - OF PRACTICE |
| BIS IS 2911-1-2 : 2010 | DESIGN AND CONSTRUCTION OF PILE FOUNDATIONS - CODE OF PRACTICE - PART 1: CONCRETE PILES - SECTION 2: BORED CAST IN-SITU CONCRETE PILES |
| BIS IS 1725 : 2013 | STABILIZED SOIL BLOCKS USED IN GENERAL BUILDING CONSTRUCTION - SPECIFICATION |
| BIS IS 4905 : 2014 | RANDOM SAMPLING AND RANDOMIZATION PROCEDURES |
| BIS IS 3535 : 1986(R2004) | METHODS OF SAMPLING HYDRAULIC CEMENT |
| BIS IS 11761 : 1997(R2002) | MULTI-WALL PAPER SACKS FOR CEMENT - SPECIFICATION |
| BIS IS 12174 : 1987(R2001) | SPECIFICATION FOR JUTE SYNTHETIC UNION BAGS FOR PACKING CEMENT |
| BIS IS 2580 : 1995(R2000) | TEXTILES - JUTE SACKING BAGS FOR PACKING CEMENT - SPECIFICATION |
| BIS IS 16353 : 2015 | PORTLAND CEMENT CLINKER - SPECIFICATION |
| BIS IS 4031-2 : 1999 AMD 2 2017 | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 2: DETERMINATION OF FINENESS BY SPECIFIC SURFACE BY BLAINE AIR PERMEABILITY METHOD |
| BIS IS 4032 : 1985 AMD 2 2010 | METHODS OF CHEMICAL ANALYSIS OF HYDRAULIC CEMENT |
| BIS IS 4845 : 1968(R2004) | DEFINITIONS AND TERMINOLOGY RELATING TO HYDRAULIC CEMENT |
| BIS IS 4031-3 : 1988(R2014) | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 3: DETERMINATION OF SOUNDNESS |
| BIS IS 4031-10 : 1988 AMD 1 2013 | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 10: DETERMINATION OF DRYING SHRINKAGE |
| BIS IS 269 : 2015 | ORDINARY PORTLAND CEMENT - SPECIFICATION |
| BIS IS 4031-5 : 1988 AMD 2 2013 | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 5: DETERMINATION OF INITIAL AND FINAL SETTING TIMES |
| BIS IS 4031-6 : 1988(R2009) | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 6: DETERMINATION OF COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT (OTHER THAN MASONRY CEMENT) |
| BIS IS 4082 : 1996(R2003) | RECOMMENDATIONS ON STACKING AND STORAGE OF CONSTRUCTION MATERIALS AND COMPONENTS AT SITE |
| BIS IS 3812-1 : 2013 | PULVERIZED FUEL ASH - SPECIFICATION - PART 1: FOR USE AS POZZOLANA IN CEMENT, CEMENT MORTAR AND CONCRETE |
| BIS IS 12154 : 1987(R2000) | SPECIFICATION FOR LIGHT WEIGHT JUTE BAGS FOR PACKING CEMENT |
| BIS IS 4031-8 : 1988 AMD 1 2013 | METHODS OF PHYSICAL TESTS FOR HYDRAULIC CEMENT - PART 8: DETERMINATION OF TRANSVERSE AND COMPRESSIVE STRENGTH OF PLASTIC MORTAR USING PRISM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.