ASTM F 75 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
Hardcopy , PDF
05-26-2023
English
12-28-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers the chemical, mechanical, and metallurgical requirements for cobalt-28 chromium-6 molybdenum alloy unfinished investment product castings for surgical implant applications and casting alloy in the form of shot, bar, or ingots to be used in the manufacture of surgical implants.
| Committee |
F 04
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the chemical, mechanical, and metallurgical requirements for cobalt-28 chromium-6 molybdenum alloy unfinished investment product castings for surgical implant applications and casting alloy in the form of shot, bar, or ingots to be used in the manufacture of surgical implants. This specification does not apply to completed surgical implants made from castings.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1377 : 2021 | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538) |
| ASTM F 1714 : 1996 : R2018 | Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices |
| ASTM F 2068 : 2015 | Standard Specification for Femoral Prostheses—Metallic Implants (Withdrawn 2023) |
| ASTM F 981 : 2004 : R2016 | Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Insertion into Bone |
| ASTM F 799 : 2019 | Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539) |
| ASTM F 384 : 2017 | Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
| ASTM F 2027 : 2016 | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| ASTM F 1672 : 2014 : R2019 | Standard Specification for Resurfacing Patellar Prosthesis (Withdrawn 2023) |
| ASTM F 3018 : 2017 | Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
| ASTM F 3047M : 2015 | Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations |
| ASTM F 1357 : 2023 | Standard Specification for Articulating Total Wrist Implants |
| ASTM F 2887 : 2023 | Standard Specification for Total Elbow Prostheses |
| ASTM F 647 : 2022 | Standard Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application |
| ASTM F 732 : 2017 | Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
| ASTM F 452 : 1976 : R2022 | Standard Specification for Preformed Cranioplasty Plates |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 2091 : 2015 | Standard Specification for Acetabular Prostheses (Withdrawn 2023) |
| ASTM F 2886 : 2017 | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| ASTM F 2665 : 2021 | Standard Specification for Total Ankle Replacement Prosthesis |
| ASTM F 1408 : 2020 : REV A | Standard Practice for Subcutaneous Screening Test for Implant Materials |
| ASTM F 763 : 2022 | Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials |
| ASTM F 1537 : 2020 | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| ASTM F 2083 : 2021 | Standard Specification for Knee Replacement Prosthesis (Withdrawn 2023) |
| ASTM F 1378 : 2018 : EDT 1 | Standard Specification for Shoulder Prostheses |
| ASTM F 564 : 2017 | Standard Specification and Test Methods for Metallic Bone Staples |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM F 601 : 1998 | Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM A 957 : 1996 | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM E 354 : 2021 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 354 : 2021 : EDT 1 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 354 : 2014 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.