ASTM F 1470 : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
Available format(s)
Hardcopy , PDF
Superseded date
10-09-2018
Superseded by
Language(s)
English
Published date
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
F 16
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice provides sampling methods for determining how many fasteners to include in a random sample in order to determine the acceptability or disposition of a given lot of fasteners.
1.2 This practice is for mechanical properties, physical properties, performance properties, coating requirements, and other quality requirements specified in the standards of ASTM Committee F16. Dimensional and thread criteria sampling plans are the responsibility of ASME Committees B18.1 and B18.18.2M-B18.18.6M.
1.3 This practice provides for two sampling plans: one designated the “detection process,” as described in Terminology F 1789
1.4 This practice is intended to be used as either a Final Inspection Plan for manufacturers, or as a Receiving Inspection Plan for purchasers/users. It is not valid for third-party qualification testing.
| ASTM F 1137/F1137M : 2019 | Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners |
| ASTM F 3329 : 2018 | Standard Specification for Carbon and Alloy Steel Metric Rivets |
| ASTM B 633 : 2019 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM F 812 : 2012 : R2017 | Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series |
| ASTM F 959/F959M : 2017 : REV A | Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series |
| ASTM A 394 : 2008 : R2015 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM F 2437/F2437M : 2017 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASTM B 635 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
| ASTM F 837M : 2016 | Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
| ASTM F 2329/F2329M : 2015 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 3111 : 2016 | Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
| ASTM A 354 : 2017 : EDT 2 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM B 696 : 2000 : R2015 | Standard Specification for Coatings of Cadmium Mechanically Deposited |
| ASTM F 541 : 2012 | Standard Specification for Alloy Steel Eyebolts |
| ASTM F 912 : 2011 : R2017 | Standard Specification for Alloy Steel Socket Set Screws |
| ASTM A 31 : 2014 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
| ASTM F 880 : 2012 : R2017 | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
| ASTM F 879 : 2015 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
| ASTM F 1941/F1941M : 2016 | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| ASTM F 2281 : 2004 : R2017 | Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
| ASTM F 901 : 2001 : R2017 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASTM A 962/A962M : 2018 | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range |
| ASTM A 449 : 2014 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASTM F 2282 : 2018 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM B 994/B994M : 2015 | Standard Specification for Nickel-Cobalt Alloy Coating |
| ASTM F 3043 : 2015 | Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
| ASTM A 502 : 2003 : R2015 | Standard Specification for Rivets, Steel, Structural |
| ASTM F 836M : 2016 : EDT 1 | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| ASTM F 2482 : 2008 : R2015 | Standard Specification for Load-Indicating Externally Threaded Fasteners |
| ASTM F 436/F436M : 2018 : REV A | Standard Specification for Hardened Steel Washers Inch and Metric Dimensions |
| ASTM F 593 : 2017 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM F 3019/F3019M : 2014 | Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
| ASTM A 574 : 2017 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM B 695 : 2004 : R2016 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM F 3148 : 2017 : REV A | Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions |
| ASTM F 879M : 2016 | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Withdrawn 2023) |
| ASTM F 2832 : 2011 : R2016 | Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
| ASTM A 153/A153M : 2016 : REV A | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM A 307 : 2014 : EDT 1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
| ASTM F 3125/F3125M : 2018 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
| ASTM F 844 : 2007 : REV A : R2013 | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| ASTM F 2833 : 2011 : R2017 | Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type |
| ASTM B 816 : 2000 : R2015 | Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM F 880M : 2016 | Standard Specification for Stainless Steel Socket Set Screws (Metric) (Withdrawn 2023) |
| ASTM F 2882/F2882M : 2017 | Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.