ASTM D 638M : 1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998)
English
12-31-2010
06-01-1998
CONTAINED IN VOL 01.06, 2001 Establishes the tensile features of reinforced and unreinforced plastics in standard dumb bell shaped test samples when tested under conditions of pre-treatment, humidity, temperature, and testing machine speed.
| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| SAE AMS3652D | Polytetrafluoroethylene (PTFE) Film Non-Critical Grade |
| SAE AMS3847D | Cloth, Quartz, \"B\" Stage Polyimide Resin Impregnated Style 581 Fabric, 315 °C (599 °F) |
| ASTM D 2105 : 2001 | Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| SAE AMS3831B | Cloth, Type “E” Glass, “B” Stage Epoxy-Resin-Impregnated 7781 Style Fabric, Flame Resistant, Improved Strength |
| SAE AMS3826C | Cloth, Type “E” Glass “B” Stage Polyester Resin Impregnated 1581 and 7781 Type Fabric |
| SAE AMS3845C | Cloth, Type “E” Glass “B” Stage Addition Cure Polyimide-Resin-Impregnated |
| ANSI Z80.6 : 1983 | PHYSICOCHEMICAL PROPERTIES OF CONVENTIONAL HARD PLASTIC CONTACT LENSES, |
| SAE MAM4778D | Nickel Alloy, Brazing Filler Metal, 92Ni 4.5Si 3.1B, 980 to 1040°C Solidus-Liquidus Range |
| ASTM D 2105 : 2001 : R2007 : EDT 1 | Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ASTM D 5140 : 1995 | Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004) |
| ASTM D 2105 : 2001 : R2019 | Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| SAE AMS3662D | Polytetrafluoroethylene Film General Purpose Grade |
| SAE AMS3811C | Rods, Aramid Fiber, Polyester Resin Coated Pultrusion |
| SAE AMS3628E | Plastic Extrusions and Moldings, Polycarbonate General Purpose |
| SAE AMSPRF46194B | Foam, Rigid, Structural, Closed Cell |
| SMPTE ST 26 : 1989 | VIDEO RECORDING - 1-IN HELICAL-SCAN RECORDERS - RAW STOCK FOR REFERENCE TAPES |
| SAE AMS3650D | Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized |
| SAE AMS3849C | Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
| SAE AMS3827C | Cloth, Type \"E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| SAE AMS3829C | Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated |
| SAE AMS3661D | Polytetrafluoroethylene (PTFE) Film Premium Grade |
| SAE AMS3529B | Plastic Sheet and Film, Vinyl Copolymers Unplasticized |
| SAE AMS3812C | Rods, Glass Fiber, Polyester Resin, Loaded Pultrusion |
| ASTM D 2105 : 2001 : R2014 | Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| SAE AMS3844C | Cloth, Type \"E\" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
| ASTM D 651 : 1984 | Method of Test for Tensile Strength of Molded Electrical Insulating Materials (Withdrawn 1989) |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM E 83 : 2016 : REDLINE | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.