ASTM D 6349 : 2021
Current
The latest, up-to-date edition.
Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
Hardcopy , PDF
English
10-20-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 05
|
| DocumentType |
Test Method
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers a procedure for the analysis of the commonly determined major and minor elements in coal, coke, and solid residues from combustion of coal and coke. These residues may be laboratory ash, bottom ash, fly ash, flue gas desulfurization sludge, and other combustion process residues.
Note 1:There are two interlaboratory studies associated with this test method. The first was conducted in 1997 ( RR:D05-1035)2 and the second was conducted in 2007 ( RR:D05-1032).3 Sulfur trioxide was only included in the 2007 study, and that study only included combustion residues derived from ash and no combustion residues derived from coke.
1.2Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1857/D1857M : 2018 | Standard Test Method for Fusibility of Coal and Coke Ash |
| ASTM D 7348 : 2013 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 8088 : 2016 | Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy |
| ASTM D 5016 : 2016 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 3174 : 2012 : R2018 : EDT 1 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 7260 : 2020 | Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants |
| ASTM D 8146 : 2022 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM D 7582 : 2015 : R2023 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 1193 : 2024 | Standard Specification for Reagent Water |
| ASTM D 8146 : 2018 | Standard Guide for Evaluating Test Method Capability and Fitness for Use |
| ASTM D 3180 : 2015 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7582 : 2024 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 7582 : 2015 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 121 : 2015 : R2024 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 121 : 2024 | Standard Terminology of Coal and Coke |
| ASTM D 7348 : 2021 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 121 : 2015 | Standard Terminology of Coal and Coke |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 3180 : 2015 : R2023 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.