ASTM D 609 : 2017 : R2022
Current
The latest, up-to-date edition.
Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
Hardcopy , PDF
English
06-30-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 01
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice covers various types of cold rolled steel panels and the procedures to be followed in their preparation for testing paint, varnish, lacquer, conversion coatings, and related products.
1.2The procedures are as follows:
Procedure A—Conversion coatings (phosphates, chromates,
etc.)
Procedure B—Vapor degreasing
Procedure C—Solvent brushing
Procedure D—Solvent wiping
Procedure E—Alkaline cleaning
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 4585/D4585M : 2018 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 1308 : 2020 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems |
| ASTM D 5178 : 2021 | Standard Test Method for Mar Resistance of Organic Coatings |
| ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM D 6905 : 2020 | Standard Practice for Impact Flexibility of Organic Coatings |
| ASTM D 2454 : 2018 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM D 2201 : 2018 | Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products |
| ASTM D 7187 : 2020 | Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
| ASTM D 5031/D5031M : 2013 : R2018 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 2803 : 2009 : R2020 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 3170/D3170M : 2014 | Standard Test Method for Chipping Resistance of Coatings |
| ASTM D 6037 : 2021 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 6675 : 2001 : R2015 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM B 117 : 2019 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM D 6762 : 2018 | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
| ASTM D 2794 : 1993 : R2019 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 823 : 2018 : R2022 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
| ASTM D 2197 : 2016 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 1882 : 2017 : R2021 | Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles |
| ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM C 957/C957M : 2017 | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| ASTM D 1731 : 2009 : R2020 | Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting |
| ASTM D 6486 : 2001 : R2017 | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 3361/D3361M : 2022 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 870 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM D 1730 : 2009 : R2020 | Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM G 85 : 2019 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6189 : 1997 : R2014 | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 7091 : 2022 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2485 : 2018 | Standard Test Methods for Evaluating Coatings For High Temperature Service |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 4338 : 1997 : R2021 | Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend |
| ASTM D 333 : 2001 : R2021 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 2247 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 822/D822M : 2013 : R2018 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM A 109/A109M : 2024 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 109/A109M : 2016 : R2018 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 1008/A1008M : 2021 : REV A | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
| ASTM A 1008/A1008M : 2023 : EDT 1 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
| ASTM A 1008/A1008M : 2024 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
| ASTM A 109/A109M : 1998 : REV A | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 1008/A1008M : 2023 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.