ASTM B 466/B466M : 2018
Current
The latest, up-to-date edition.
Standard Specification for Seamless Copper-Nickel Pipe and Tube
Hardcopy , PDF
English
04-01-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B 05
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification establishes the requirements for seamless copper-nickel pipe and tube in straight lengths, suitable for general engineering purposes. The alloys involved are copper alloys UNS Nos. C70400, C70600, C70620, C71000, C71500, C71520, and C72200.
1.1.1Copper alloys UNS Nos. C70620 and C71520 are intended for product that will be subsequently welded.
1.2Units—Values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
1.3The following safety hazard caveat pertains only to the test methods described in this specification:
1.3.1This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 968/B968M : 2016 | Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube |
| ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 243 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 478 : 2024 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 243 : 2024 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM B 153 : 2022 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
| ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
| ASTM B 968/B968M : 2016 : R2022 | Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube |
| ASTM B 153 : 2011 : R2017 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.