AS 2067-2008
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Substations and high voltage installations exceeding 1 kV a.c.
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-12-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Provides minimum requirements for the design and erection of high voltage installations in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use intended.
| Committee |
EL-043
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8979 X
|
| Pages |
119
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes |
This Standard provides minimum requirements for the design and erection of high voltage installations in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use intended.For the purposes of this Standard, a high voltage installation is considered to be:(a) An electricity network substation, under the control of an electricity network operator or entity authorized by a licence or other legal instrument to convey electricity.(b) The high voltage parts of an electrical installation of a power station including all auxiliary systems and interconnecting lines and cables between power stations if on the same site.(c) The high voltage parts of an electrical installation that are not covered in (a) and (b) above. This may include but not be limited to consumer and customer electrical installations serving premises such as factories, commercial facilities, industrial plants, institutional facilities and mine sites.A high voltage installation includes, but is not limited to, the following equipment:(i) High voltage electrical installations on masts, poles and towers.(ii) Switchgear and/or transformers and/or electrical equipment located outside a closed electrical operating area.(iii) Rotating electrical machines.(iv) Switchgear, controlgear and assemblies.(v) Transformers and reactors.(vi) Converters.(vii) Cables.(viii) Lines.(ix) Wiring systems.(x) Batteries, battery chargers and associated d.c. supply systems.(xi) Capacitors.(xii) Earthing systems.(xiii) Buildings and fences that are part of a closed electrical operating area.(xiv) Associated protection, control, auxiliary and ancillary systems.(xv) Structures, foundations, earthworks and drainage.NOTE: In general, a Standard for an item of equipment takes precedence over this Standard.This Standard does not apply to the design and erection of any of the following:(A) Overhead lines and underground cables between separate installations.(B) Ship and offshore installations.(C) Mine site electrical installations, or parts of such installations, for which mining industry specific legislation sets other or additional requirements.(D) Switchgear and/or transformers and/or electrical equipment located within a closed electrical operating area supplied at low voltage and where contact cannot be made with high voltage conductors.(E) Test sites.This Standard does not apply to the design of factory built, type-tested equipment for which separate Australian Standards exist (or IEC standards where Australian standards do not exist) to the extent of requirements covered by the standards. However, all other requirements of this Standard not covered by the type tests for the type-tested equipment must comply with this Standard. In particular, ground safety clearances and section safety clearances must comply with this Standard.Section 11 of this Standard provides additional requirements for the high voltage parts of an electrical installation referred to under (c) above which is not under the control of an electricity network operator or entity authorized by a licence or other legal instrument to convey electricity. NOTES:1 Users of this Standard should be aware of existing local, state or national regulations.2 Further requirements for specific locations may also be referenced or applied through legislation.3 High voltage a.c. installations associated with electric traction systems are included.
First published (as AS C13, being endorsement of BS 158:1961 with Australian amendment; AS C52, being endorsement of BS 159:1957 with Australian amendment; and AS C340, being endorsement of BS 162:1962 with Australian amendment) 1967.
AS 2067 first published 1977.
Fourth edition 2008.
| AS/NZS 4871.3:2002 | Electrical equipment for coal mines, for use underground Substations |
| AS 62271.201-2008 | High-voltage switchgear and controlgear AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| AS/NZS 60479.1:2002 | Effects of current on human beings and livestock General aspects |
| AS/NZS 61000.6.2:2006 | Electromagnetic compatibility (EMC) General standards - Immunity for industrial environments (Reconfirmed 2016) |
| AS 60068.2.54-2004 | Environmental testing Tests - Test Ta: Soldering - Solderability testing by the wetting balance method |
| AS 60068.2.61-2003 | Environmental testing Tests - Test Z/ABDM: Climate sequence |
| AS 60068.2.59-2003 | Environmental testing Tests - Test Fe: Vibration - Sine beat method |
| AS 60068.2.69-2004 | Environmental testing Tests - Test Te: Soldering - Solderability testing of electronic components for surface mount technology by the wetting balance method |
| AS 60068.3.3-2003 | Environmental testing Guidance - Seismic test methods for equipment |
| AS 60068.2.68-2003 | Environmental testing Tests - Test L: Dust and sand |
| AS 60068.2.39-2003 | Environmental testing Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test |
| AS/NZS 4871.2:2002 | Electrical equipment for coal mines, for use underground Distribution, control and auxiliary equipment |
| AS 60068.2.46-2004 | Environmental testing Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections |
| AS/NZS 4360:2004 | Risk management |
| AS 2791-1996 | High-voltage switchgear and controlgear - Use and handling of sulphur hexafluoride (SF6) in high-voltage switchgear and controlgear |
| AS 3700 SUPP 1-2004 | Masonry structures - Commentary (Supplement to AS 3700-2001) |
| AS/NZS 61000.4.5:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS 60068.2.31-2003 | Environmental testing Tests - Test Ec: Drop and topple, primarily for equipment-type specimens |
| AS 1055.1-1997 | Acoustics - Description and measurement of environmental noise General procedures |
| AS/NZS 61000.4.6:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| AS 3600 SUPP 1-1994 | Concrete structures - Commentary (Supplement to AS 3600-1994) |
| AS 3851-1991 | The calculation of short-circuit currents in three-phase a.c. systems (Reconfirmed 2015) |
| AS 3011.1-1992 | Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells |
| AS 60076.11-2006 | Power transformers Dry-type transformers (Reconfirmed 2016) |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| AS 60068.3.1A-2003 | Environmental testing Background information - Section one: Cold and dry heat tests - First supplement |
| AS 1940-2004 | The storage and handling of flammable and combustible liquids |
| AS 2650-2005 | Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD) |
| HB 219:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant - Worked examples for the application guide (Reconfirmed 2020) |
| AS/NZS 2865:2001 | Safe working in a confined space |
| AS 60068.2.45-2003 | Environmental testing Tests - Test XA and guidance: Immersion in cleaning solvents |
| AS 60068.3.7-2003 | Environmental testing Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
| AS/NZS 61000.2.2:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (Reconfirmed 2013) |
| AS/NZS 61000.3.2:2007 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD) |
| ENA C(b)1-2006 | Guidelines for design and maintenance of overhead distribution and transmission lines |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 60068.2.33-2003 | Environmental testing Tests - Guidance on change of temperature tests |
| AS 60068.2.53-2003 | Environmental testing Tests - Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests |
| AS 2374.2-1997 | Power transformers Temperature rise |
| AS/NZS 1102.111:1997 | Graphical symbols forelectrotechnical documentation Architectural and topographical installation plans and diagrams |
| AS 60068.3.1-2003 | Environmental testing Background information - Section one: Cold and dry heat tests |
| AS 60068.2.13-2003 | Environmental testing Tests - Test M: Low air pressure |
| AS/NZS 61000.4.2:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test |
| AS/NZS 1768:2007 | Lightning protection |
| AS 60068.2.7-2003 | Environmental testing Tests - Test Ga and guidance: Acceleration, steady state |
| AS 60068.3.8-2004 | Environmental testing Supporting documentation and guidance - Selecting amongst vibration tests |
| AS/NZS 61000.4.3:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| AS 60068.2.11-2003 | Environmental testing Tests - Test Ka: Salt mist |
| AS 60068.2.30-2003 | Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) |
| AS 60068.2.2-2003 | Environmental testing Tests - Test B: Dry heat (Reconfirmed 2018) |
| AS 60068.2.40-2003 | Environmental testing Tests - Test Z/AM: Combined cold/low air pressure tests |
| AS 60068.3.2-2003 | Environmental testing Background information - Combined temperature/low air pressure tests |
| AS/NZS 1680.2.3:2008 | Interior and workplace lighting Specific applications - Educational and training facilities |
| AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
| AS 1170.4 SUPP 1-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads - Commentary (Supplement to AS 1170.4-1993) |
| AS/NZS 1680.2.1:2008 | Interior and workplace lighting Specific applications - Circulation spaces and other general areas |
| AS 60068.2.5-2003 | Environmental testing Tests - Test Sa: Simulated solar radiation at ground level |
| AS/NZS 1680.2.2:2008 | Interior and workplace lighting Specific applications - Office and screen-based tasks |
| AS 3600-2001 | Concrete structures |
| AS 60068.2.50-2003 | Environmental testing Tests - Test Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| AS/NZS 61000.4.4:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrical fast transient/burst immunity test |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS 60068.2.9-2003 | Environmental testing Tests - Guidance for solar radiation testing |
| AS 2293.3-2005 | Emergency escape lighting and exit signs for buildings Emergency escape luminaires and exit signs |
| AS/NZS 61000.2.5:1999 | Electromagnetic compatibility (EMC) Environment - Classification of electromagnetic environments (Reconfirmed 2016) |
| AS/NZS 4383.1:1996 | Preparation of documents used in electrotechnology General requirements |
| AS 3700-2001 | Masonry structures |
| AS/NZS 61000.4.16:2002 | |
| AS 60038-2000 | Standard voltages |
| AS 60068.2.66-2003 | Environmental testing Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) |
| AS/NZS 61000.4.34:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (IEC 61000-4-34, Ed. 1.0 (2005) MOD) |
| AS/NZS 61000.4.30:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power quality measurement methods |
| AS 62271.203-2005 | High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV (IEC 62271-203, Ed. 1.0 (2003) MOD) |
| AS 60068.4-2003 | Environmental testing Information for specification writers - Test summaries |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS 1100.401-1984 | Technical drawing Engineering survey and engineering survey design drawing (Reconfirmed 2014) |
| AS 60068.2.6-2003 | Environmental testing Tests - Test Fc: Vibration (sinusoidal) (Reconfirmed 2018) |
| AS 1170.4-2007 | Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
| AS 60068.3.6-2003 | Environmental testing Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
| AS 1100.301-2008 | Technical drawing Architectural drawing (Reconfirmed 2018) |
| AS 60068.2.47-2003 | Environmental testing Tests - Mounting of compounds, equipment and other articles for vibration, impact and similar dynamic tests |
| AS/NZS 3100:2002 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS 61000.4.14:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage fluctuation immunity test |
| AS/NZS 61000.3.3:2006 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current per phase and not subject to conditional connection |
| AS 60068.2.64-2003 | Environmental testing Tests - Test Fh: Vibration, broad-band random (digital control) and guidance |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS/NZS 61000.3.4:2007 | Electromagnetic compatibility (EMC) Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A (Reconfirmed 2018) |
| AS 60068.3.5-2003 | Environmental testing Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| AS/NZS 61000.4.11:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD) (Reconfirmed 2016) |
| HB 242-2007 | High voltage mining equipment for use underground (Reconfirmed 2019) |
| AS/NZS 4383.3:1996 | Preparation of documents used in electrotechnology Connection diagrams, tables and lists |
| AS/NZS 1680.1:2006 | Interior and workplace lighting General principles and recommendations |
| AS 1210 SUPP 2-1999 | Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997) |
| AS/NZS 61000.2.3:1999 | Electromagnetic compatibility (EMC) Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena (Reconfirmed 2016) |
| AS 1210 SUPP 1-1990 | |
| AS 1210-1997 | Pressure vessels |
| AS/NZS 61000.1.1:2000 | Electromagnetic compatibility (EMC) General - Application and interpretation of fundamental definitions and terms (Reconfirmed 2016) |
| AS 60068.2.58-2004 | Environmental testing Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| AS 60068.2.78-2003 | Environmental testing Tests - Test Cab: Damp heat, steady state (Reconfirmed 2018) |
| AS/NZS 3835.2:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Application guide |
| AS 60068.5.2-2003 | Environmental testing Guide to drafting of test methods - Terms and definitions |
| AS 60068.2.29-2003 | Environmental testing Tests - Test Eb and guidance: Bump |
| AS/NZS 61000.4.1:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Overview of IEC 61000-4 series |
| AS 62271.202-2008 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| AS/NZS 61000.6.3:2007 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for residential, commercial and light-industrial environments |
| AS 1100.101-1992 | Technical drawing General principles (Reconfirmed 2014) |
| AS 60068.2.67-2003 | Environmental testing Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components |
| HB 103-1997 (CJC 7) | Coordination of power and telecommunications - Crossings code - The arrangement of overhead power and telecommunications lines, pole stay wires, and suspension wires |
| AS/NZS 2344:1997 | Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz |
| AS 1682.1-1990 | Fire dampers Specification |
| AS/NZS 61000.3.11:2002 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection (Reconfirmed 2013) |
| AS/NZS 1680.4:2001 | Interior lighting - Maintenance of electric lighting systems |
| AS 60068.2.41-2003 | Environmental testing Tests - Test Z/BM: Combined dry heat/low air pressure tests |
| AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
| AS/NZS 1680.2.5:1997 | Interior lighting - Hospital and medical tasks |
| AS 60068.2.65-2003 | Environmental testing Tests - Test Fg: Vibration, acoustically induced |
| AS 2444-2001 | Portable fire extinguishers and fire blankets - Selection and location (Reconfirmed 2021) |
| AS 60068.2.49-2004 | Environmental testing Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections |
| AS 60068.2.81-2004 | Environmental testing Tests - Test Ei: Shock - Shock response spectrum synthesis |
| AS 60068.2.51-2003 | Environmental testing Tests - Test Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| AS 60068.2.27-2003 | Environmental testing Tests - Test Ea and guidance: Shock |
| HB 102-1997 (CJC 6) | Coordination of power and telecommunications - Low Frequency Induction (LFI) - Application Guide to the LFI Code |
| AS 62271.200-2005 | High-voltage switchgear and controlgear A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-200, Ed. 1 (2003) MOD) |
| AS/NZS 4871.4:2002 | Electrical equipment for coal mines, for use underground Mains powered electrical mobile machines |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS 3735 SUPP 1-2001 | Concrete structures for retaining liquids - Commentary (Supplement to |
| AS 1824.2-1985 | Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
| AS/NZS 61000.2.12:2003 | Electromagnetic compatibility (EMC) Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (Reconfirmed 2013) |
| AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS 60068.2.60-2003 | Environmental testing Tests - Test Ke: Flowing mixed gas corrosion test |
| AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
| AS 1682.2-1990 | Fire Dampers Installation |
| AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
| AS/NZS 4383.4:1998 | Preparation of documents used in electrotechnology Location and installation documents |
| AS 60068.2.48-2003 | Environmental testing Tests - Guidance on the application of the tests of AS 60068 to simulate the effects of storage |
| AS 1359.101-1997 | Rotating electrical machines - General requirements Rating and performance |
| AS/NZS 61000.4.8:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Power frequency magnetic field immunity test |
| AS 60068.2.43-2004 | Environmental testing Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
| AS 60068.2.38-2003 | Environmental testing Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| AS 60068.2.20-2004 | Environmental testing Tests - Test T: Soldering |
| AS 60068.2.55-2003 | Environmental testing Tests - Test Ee and guidance: Bounce |
| AS/NZS 61000.4.7:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
| AS/NZS 3013:2005 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020) |
| AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
| AS 60068.2.32-2003 | Environmental testing Tests - Test Ed: Free fall |
| AS/NZS 61000.4.13:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
| HB 100-2000 (CJC 4) | COORDINATION OF POWER AND TELECOMMUNICATIONS - Manual for the establishment of safe work practices and the minimization of operational interference between power systems and paired cable telecommunications systems |
| AS 60068.2.74-2003 | Environmental testing Tests - Test Xc: Fluid contamination |
| AS 60068.2.75-2003 | Environmental testing Tests - Test Eh: Hammer tests |
| AS/NZS 1170.2:2002 | Structural design actions Wind actions |
| AS/NZS 61000.3.7:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems (IEC 61000-3-7:1996, MOD) |
| AS 60068.1-2003 | Environmental testing General and guidance (Reconfirmed 2018) |
| AS 60068.2.1-2003 | Environmental testing Tests - Test A: Cold (Reconfirmed 2018) |
| AS/NZS 61000.4.27:2006 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Unbalance, immunity test |
| AS/NZS 61000.3.5:1998 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
| AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
| AS 60068.2.17-2003 | Environmental testing Tests - Test Q: Sealing |
| AS/NZS 4871.6:2007 | Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
| AS 3011.2-1992 | Electrical installations - Secondary batteries installed in buildings Sealed cells |
| AS/NZS 4871.5:2002 | Electrical equipment for coal mines, for use underground Battery powered electrical mobile machines |
| AS 1100.201-1992 | Technical drawing Mechanical engineering drawing (Reconfirmed 2014) |
| AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
| AS/NZS 1680.2.4:1997 | Interior lighting Industrial tasks and processes |
| AS 60068.2.57-2003 | Environmental testing Tests - Test Ff: Vibration - Time-history method |
| AS/NZS 1680.0:1998 | Interior lighting Safe movement |
| AS 60068.2.14-2003 | Environmental testing Tests - Test N: Change of temperature |
| AS 3735-2001 | Concrete structures for retaining liquids |
| AS 60068.2.44-2004 | Environmental testing Tests - Guidance on test T: Soldering |
| AS 3865-1991 | Calculation of the effects of short-circuit currents |
| AS/NZS 61000.6.4:2007 | Electromagnetic compatibility (EMC) Generic standards - Emission standard for industrial environments |
| AS/NZS 61000.6.1:2006 | Electromagnetic compatibility (EMC) Generic standards - Immunity for residential, commercial and light industrial environments (Reconfirmed 2016) |
| AS 60068.2.10-2003 | Environmental testing Tests - Test J and guidance: Mould growth |
| AS 60068.2.52-2003 | Environmental testing Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
| AS/NZS 61000.3.6:2001 | Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for distorting loads in MV and HV power systems (IEC 61000-3-6:1996, MOD) |
| AS 60068.2.21-2004 | Environmental testing Tests - Test U: Robustness of terminations and integral mounting devices |
| AS 60068.2.18-2003 | Environmental testing Tests - Test R and guidance: Water |
| AS 60068.2.70-2003 | Environmental testing Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands |
| AS/NZS 3835.1:2006 | Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
| AS 2374.6-1994 | Power transformers Determination of transformer and reactor sound levels |
| AS/NZS 61000.4.15:2005 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Flickermeter - Function and design specifications |
| AS 1905.1-2005 | Components for the protection of openings in fire-resistant walls Fire-resistant doorsets |
| AS/NZS 61000.3.12:2006 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A per phase |
| HB 101-1997 (CJC 5) | Coordination of power and telecommunications - Low Frequency Induction (LFI) - Code of practice for the mitigation of hazardous voltages induced into telecommunications lines |
| AS 60068.2.42-2004 | Environmental testing Tests - Test Kc: Sulphur dioxide test for contacts and connections (Reconfirmed 2018) |
| AS 60068.2.77-2004 | Environmental testing Tests - Test 77: Body strength and impact shock |
| AS 4436-1996 | Guide for the selection of insulators in respect of polluted conditions |
| AS/NZS 4383.2:1996 | Preparation of documents used in electrotechnology Function-oriented diagrams |
| AS 60068.3.4-2003 | Environmental testing Supporting documentation and guidance - Damp heat tests |
| AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
| AS 5062:2016 | Fire protection for mobile and transportable equipment |
| AS/NZS 4871.2:2010 | Electrical equipment for mines and quarries Distribution, control and auxiliary equipment |
| AS/NZS 7000:2016 | Overhead line design |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
| AS/NZS 1418.10:2011 | Cranes, hoists and winches Mobile elevating work platforms |
| HB 331-2012 | Overhead line design |
| AS/NZS 5601.1:2013 | Gas installations General installations |
| AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.