ARINC 628-6 : 2002
Current
The latest, up-to-date edition.
CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION
Hardcopy , PDF
English
02-28-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.0 INTRODUCTION
1.1 Scope
1.2 Connector Type
1.3 Fiber/Cable Type
2.0 REFERENCES
2.1 Applicable Documents and Drawings
3.0 GENERAL DESIGN PROVISIONS
3.1 Cable Assembly Design provisions
3.2 Cable Assembly Performance Provisions
3.3 Connector Design Provisions
3.4 Connector Performance Provisions
3.5 Cable Design Provisions
3.6 Cable Performance Provisions
4.0 QUALITY ASSURANCE PROVISIONS
4.1 General Quality Assurance Provisions
4.2 Qualification Provisions
4.3 Buyer Acceptance Tests
4.4 Key Characteristics
4.5 Reliability
4.6 Weight Compliance
5.0 PACKAGING
5.1 General Packaging
5.2 Shipping Dust Covers
6.0 DATA PROVISIONS AND DESIGN REVIEW
6.1 Supplier Data Requirements List (SDRL)
7.0 FIBER OPTIC INSTALLATION GUIDELINES
7.1 Scope
7.2 General Requirements
7.3 Handling and Storage
7.4 Examination and Cleaning
7.5 Bundling
7.6 Bend Radius
7.7 Clamping
7.8 Routing Guidelines
7.9 Mating
7.10 Unmating
7.11 Removal of a Damaged Cable Assembly
7.12 Performance Verification
ATTACHMENTS
1 - Intermateability and Interoperability Provisions
APPENDICES
A - List of Acronyms
B - Link Margin Analysis Instructions
C - Wiring Diagram Symbols
Describes the minimum acceptable provisions for connectorized fiber optic cable assemblies used in permanently installed airframe wire bundles that are part of ARINC 628 supported systems.
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
Aeronautical Radio Inc.
|
| Status |
Current
|
| ARINC 803 : 2013 | FIBER OPTIC SYSTEM DESIGN GUIDELINES |
| SAE AIR 5271 : 2009 | A GUIDELINE FOR APPLICATION OF HIGH-DENSITY FIBER OPTIC INTERCONNECTS TO AEROSPACE PLATFORMS |
| ARINC 801-3 : 2013 | FIBER OPTIC CONNECTORS |
| ARINC 804 : 2007 | FIBER OPTIC ACTIVE DEVICE SPECIFICATION |
| ARINC 628P4A-3: 2005 | CABIN EQUIPMENT INTERFACES - PART 4A: CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - CABIN DISTRIBUTION SYSTEM - DAISY CHAIN |
| TIA/EIA 455-35 : A1990(R2008) | FIBER OPTIC COMPONENT DUST (FINE SAND) TEST |
| TIA/EIA 455-16 : A1991(R2014) | SALT SPRAY (CORROSION) TEST FOR FIBER OPTIC COMPONENTS - FOTP-16 |
| ASTM D 3399 : 1981 : R1995 | Standard Specification for General-Purpose Synthetic Detergent Liquid (Withdrawn 2000) |
| TIA/EIA 455-2 : C1998(R2008) | IMPACT TEST MEASUREMENTS FOR FIBER OPTIC DEVICES |
| SAE ARP926B | FAULT/FAILURE ANALYSIS PROCEDURE |
| SAE AMS1631C | CLEANER, CARPET WATER EXTRACTION TYPE |
| TIA/EIA 455-71 : A1999(R2014) | PROCEDURE TO MEASURE TEMPERATURE-SHOCK EFFECTS ON FIBER OPTIC COMPONENTS |
| TIA/EIA 455-11 : D2010(R2014) | FOTP-11 - VIBRATION TEST PROCEDURE FOR FIBER OPTIC COMPONENTS AND CABLES |
| TIA/EIA 455-8 : 2000(R2008) | MEASUREMENT OF SPLICE OR CONNECTOR LOSS AND REFLECTANCE USING AN OTDR |
| TIA/EIA 455-1 : B1998(R2008) | CABLE FLEXING FOR FIBER OPTIC INTERCONNECTING DEVICES |
| TIA/EIA 455-25 : D2016 | FOTP-25 - IMPACT TESTING OF OPTICAL FIBER CABLES |
| SAE AMS 1630 : 2002 | CLEANER, CARPET SHAMPOO TYPE |
| TIA/EIA 455-98 : A1990(R2000) | FIBER OPTIC CABLE EXTERNAL FREEZING TEST |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| TIA/EIA 455 : C2014 | STANDARD TEST PROCEDURE FOR FIBER OPTIC FIBERS, CABLES, TRANSDUCERS, SENSORS, CONNECTING AND TERMINATING DEVICES, AND OTHER FIBER OPTIC COMPONENTS |
| TIA/EIA 455-88 : 2001 | FIBER OPTIC CABLE BEND TEST |
| SAE AMS 1534 : 2013 | CLEANER, AIRCRAFT GLASS WINDOW |
| TIA/EIA 455-4 : C2002(R2014) | FIBER OPTIC COMPONENT TEMPERATURE LIFE TEST |
| MIL C 83723 : E | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR |
| TIA 455-107 : A1999 | DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| TIA/EIA 455-162 : A1999(R2013) | FOTP-162 FIBER OPTIC CABLE TEMPERATURE-HUMIDITY CYCLING |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| TIA 455-104 : B2016 | FOTP-104 - FIBER OPTIC CABLE CYCLIC FLEXING TEST |
| MIL-STD-1344 Revision A:1977 | TEST METHODS FOR ELECTRICAL CONNECTORS |
| TIA/EIA 455-171 : A2001 | ATTENUATION BY SUBSTITUTION MEASUREMENT FOR SHORT-LENGTH MULTIMODE GRADED-INDEX AND SINGLE-MODE OPTICAL FIBER-CABLE ASSEMBLIES |
| SAE AMS1550B | CLEANER, WATER BASE, AIRCRAFT INTERIOR HARD SURFACE MATERIALS |
| TIA/EIA 455-5 : C2002 | HUMIDITY TEST PROCEDURE FOR FIBER OPTIC COMPONENTS |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| MIL STD 1678 : NOTICE 1 | FIBER OPTICS TEST METHODS AND INSTRUMENTATION |
| TIA/EIA 455-32 : A1990(R2008) | FOTP-32 - FIBER OPTIC CIRCUIT DISCONTINUITIES |
| MIL-E-51454 Revision A:1994 | ETHYL ALCOHOL (ETHANOL) |
| MIL-STD-1629 Revision A:1980 | PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS |
| SAE AMS 1453 : 2015 | DISINFECTANT CLEANER FOR AIRCRAFT INTERIOR GENERAL PURPOSE LIQUID |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-104 Revision C:1986 | LIMITS FOR ELECTRICAL INSULATION COLOR |
| GR 326 CORE : ISSUE 4 | GENERIC REQUIREMENTS FOR SINGLE-MODE OPTICAL CONNECTORS AND JUMPER ASSEMBLIES |
| DOD-STD-1678 Base Document:1977 | FIBER OPTICS TEST METHODS AND INSTRUMENTATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.