09/30182101 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
Hardcopy , PDF
12-31-2010
English
FOREWORD
1 Scope and object
2 Normative references
3 Definitions
3.1 General
4 Environmental conditions
5 Characteristics
5.1 General
5.2 Reference temperature
5.3 Efficiency characteristics
5.4 Commutator type traction motor characteristics
5.5 Main generator characteristics
5.6 Auxiliary motor characteristics
5.7 Auxiliary generator characteristics
5.8 Auxiliary motor-generator set and rotary convertor
characteristics
6 Marking
6.1 Nameplate
6.2 Terminal and lead markings
7 Test categories and summary of tests
7.1 Test categories
7.1.1 General
7.1.2 Type tests
7.1.3 Routine tests
7.1.4 Investigation tests
7.2 Summary of tests
8 Type tests
8.1 Temperature-rise tests
8.1.1 General
8.1.2 Ventilation during temperature-rise tests
8.1.3 Judgement of results
8.1.4 Limits of temperature rise
8.1.5 Short-time overload temperature-rise test
8.2 Characteristic tests and tolerances
8.2.1 General
8.2.2 Commutator type traction motors
8.2.3 Main generators
8.2.4 Auxiliary motors
8.2.5 Auxiliary generators
8.2.6 Auxiliary motor-generator sets and rotary
convertors
8.3 Commutation tests
8.3.1 General
8.3.2 Traction motors
8.3.3 Main generators
8.3.4 Auxiliary motors and generators and motor-generator
sets
8.4 Transient tests
8.4.1 General
8.4.2 Traction motors and motors of main motor-generator
sets
8.4.3 Auxiliary motors, auxiliary motor-generator sets
and auxiliary rotary convertors
8.4.4 Voltage jump test on auxiliary motors, auxiliary
motor-generator sets and auxiliary rotary convertors
8.5 Short-circuit tests on main and auxiliary alternators
8.6 Starting tests
8.6.1 General
8.6.2 Single-phase a.c. locomotive motors
8.6.3 Main motor-generator sets
8.6.4 Auxiliary motors, auxiliary motor-generator sets
and auxiliary rotary convertors
8.7 Overspeed tests
8.8 Vibration tests
8.8.1 Internally generated vibration characteristics
9 Routine tests
9.1 Short-time soundness test
9.1.1 General
9.1.2 Test conditions
9.1.3 Plotting of heating and cooling curves
9.1.4 Judgement of results
9.2 Characteristic tests and tolerances
9.2.1 General
9.2.2 Commutator type traction motors
9.2.3 Main generators
9.2.4 Alternative tests for alternators
9.2.5 Auxiliary motors
9.2.6 Auxiliary generators
9.2.7 Auxiliary motor-generator sets and convertors
9.3 Commutation routine tests
9.3.1 General
9.3.2 Traction motors
9.3.3 Main generators
9.3.4 Auxiliary motors and generators and motor-generator
sets
9.4 Overspeed tests
9.4.1 General
9.4.2 Traction motors
9.4.3 Main or auxiliary engine-driven generators
9.4.4 Generators driven by a vehicle axle
9.4.5 Main or auxiliary motor-generator sets, auxiliary
convertors and auxiliary motors
9.5 Dielectric tests
9.6 Vibration tests (imbalance)
9.7 Commutator radial run-out measurement
Annex A (normative) - Measurement of temperature
A.1 Temperature of the machine parts
A.2 Temperature of the cooling air
A.3 Measurement of resistance
A.4 Stopping of machines and time of "commencement
of cooling"
A.5 Time of the hot resistance measurements and
extrapolation of the cooling and heating curves
Annex B (informative) - Methods of determining losses
and efficiency
B.1 General
B.2 Symbols
B.3 Correction of results to the reference temperature
B.4 Regenerative methods
B.5 Measurement of the a.c. losses of pulsating current
motors
B.6 Summation of losses method
B.7 Reference documents
Annex C (informative) - Noise measurement and limits
Annex D (normative) - Supply voltages of traction systems
Annex E (informative) - Agreement between user and manufacturer
Bibliography
BS EN 60349-1
| Committee |
GEL/9/2
|
| DocumentType |
Draft
|
| Pages |
66
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| IEC 60050-131:2002 | International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| IEC TR 60638:1979 | Criteria for assessing and coding of the commutation of rotating electrical machines for traction |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60050-411:1996 | International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| IEC 60034-8:2007+AMD1:2014 CSV | Rotating electrical machines - Part 8: Terminal markings anddirection of rotation |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.