SAE AMS5646P
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
Available format(s)
Hardcopy , PDF
Superseded date
05-01-2022
Superseded by
Language(s)
English
Published date
10-07-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings.
| Committee |
AMS-F
|
| DocumentType |
Revision
|
| Pages |
7
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| QQ-S-763 Revision F:1996 | Similar to |
| SAE AS4468G | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| SAE AS269J | IDENTIFICATION OF MATERIAL FOR AN, MS AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| SAE MA2007A | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| MS27637 Revision C:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 45 DEGREES, SWIVEL NUT |
| SAE AS4623E | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS7473C | BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
| SAE AS620G | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| SAE AS614D | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE MA2126B | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| SAE MA 620 : 2015 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| SAE AS 5951 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS4604B | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| MS9769 Revision B:2008 | REDUCER, TUBE - STRAIGHT, TUBE TO BOSS |
| MS9195 Revision B:2010 | ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
| SAE AS1472A | HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER |
| MS27636 Revision B:2009 | ELBOW, FLARELESS, TUBE TO HOSE, 90 DEGREES, SWIVEL NUT |
| MS9313 Revision B:2010 | CAP, TUBE - SAE-AMS5646 |
| SAE AS604E | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| SAE AS4098A | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| SAE MA614A | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
| SAE AS1946E | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| SAE AS5420G | HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| MS9483 Revision C:2010 | FERRULE, BRAZING, TUBE FITTING - CRES SAE-AMS5646, STRAIGHT |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| MS9196 Revision C:2015 | TEE, TUBE - SAE-AMS5646, BOSS |
| MS9879 Revision B:2016 | SLEEVE, SWIVEL-PILOTED O-RING TUBE CONNECTION, BRAZING, AMS 5046 |
| MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
| MS9315 Revision C:2010 | CAP ASSEMBLY, TUBE - SAE-AMS5646, SILVER PLATED NUT |
| SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
| SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
| SAE AS1339H | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS1227C | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| SAE AS 4897 : 1994 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
| SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
| MS9314 Revision C:2010 | CAP ASSEMBLY, TUBE - SAE-AMS5646 |
| SAE MA 2100 : 2015 | HOSE ASSEMBLIES, METAL MEDIUM PRESSURE, HIGH TEMPERATURE, METRIC |
| SAE AS1424G | HOSE ASSEMBLIES, METAL, MEDIUM PRESSURE, HIGH TEMPERATURE |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| SAE MA 4623 : 2015 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AS5169C:2021 | FITTING, PORT PLUG AND BLEEDER<br> |
| SAE AS4897A:2019 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for<br> |
| SAE AMS 2241 : 2016 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE |
| SAE AMS2248H | CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
| SAE AMS2808E | IDENTIFICATION FORGINGS |
| SAE AMS7490Q | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
| SAE AMS 2243 : 2013 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL TUBING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.