ISO/TR 15608:2017
Current
Current
The latest, up-to-date edition.
Welding — Guidelines for a metallic materials grouping system
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-02-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TR 15608:2017 provides guidelines for a uniform system for grouping materials for welding purposes. It can also be applied for other purposes, such as heat treatment, forming and non-destructive testing.
It covers grouping systems for the following standardized materials:
? steels;
? aluminium and its alloys;
? copper and its alloys;
? nickel and its alloys;
? titanium and its alloys;
? zirconium and its alloys;
? cast irons.
| Committee |
ISO/TC 44/SC 10
|
| DocumentType |
Technical Report
|
| Pages |
7
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SA/SNZ TR ISO 15608:2020 | Identical |
| DIN CEN ISO/TR 15608:2020-07 | Identical |
| DIN CEN ISO/TR 15608:2020-07 | Identical |
| FD CEN ISO/TR 15608 : 2017 FD | Identical |
| S.R. CEN ISO/TR 15608:2017 | Identical |
| CEN ISO/TR 15608:2017 | Identical |
| SIS-CEN ISO/TR 15608 : 2017 | Identical |
| PD CEN ISO/TR 15608:2017 | Identical |
| UNE-CEN ISO/TR 15608:2020 IN | Identical |
| NEN NPR CEN ISO/TR 15608 : 2013 | Identical |
| CR ISO 15608 : 2000 | Identical |
| UNI CEN ISO/TR 15608 : 2012 | Identical |
| UNE-CR ISO 15608:2003 | Identical |
| DIN V 1738:2000-07 | Corresponds |
| ONORM ONR CEN ISO/TR 15608 : 2018 | Identical |
| PD CR ISO 15608:2000 | Identical |
| DIN CEN ISO/TR 15608;DIN SPEC 8517:2013-08 | Identical |
| I.S. CEN ISO TR 15608:2005 | Identical |
| NEN NPR CR ISO 15608 : 2000 | Identical |
| DIN SPEC 8517 : 2013 | Identical |
| DIN-Fachbericht CEN ISO/TR 15608:2006-01 | Identical |
| UNE-CEN ISO/TR 15608:2006 IN | Identical |
| I.S. CR ISO 15608:2000 | Identical |
| BS EN 1708-3:2012 | Welding. Basic weld joint details in steel Clad, buttered and lined pressurized components |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| 14/30266380 DC : 0 | BS EN ISO 15614-8 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS |
| 15/30324507 DC : 0 | BS EN ISO 15618-1 - QUALIFICATION TESTING OF WELDERS FOR UNDERWATER WELDING - PART 1: DIVER-WELDERS FOR HYPERBARIC WET WELDING |
| DIN EN 1011-2:2001-05 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| DIN EN ISO 13585:2012-10 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
| I.S. EN 287-1:2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| 10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| 13/30259076 DC : 0 | BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| CEN ISO/TR 20173:2009 | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009) |
| DIN EN ISO 15614-14:2013-12 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
| EN 13445-10:2015 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
| 09/30211880 DC : 0 | BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN ISO 15614-7:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
| DIN EN 1708-3:2012-05 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
| 11/30235519 DC : 0 | BS EN ISO 15614-14 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
| PD CEN ISO/TR 20174:2005 | Welding. Grouping systems for materials. Japanese materials |
| 01/714474 DC : DRAFT NOV 2001 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 11/30246678 DC : 0 | BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| 04/30125238 DC : DRAFT NOV 2004 | EN 15085-3 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| 10/30217107 DC : 0 | BS ISO 9606-1 - APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS EN 13445-8 : 2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN ISO 15614-13 : DRAFT 2010 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| CEN ISO/TR 14745:2015 | Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015) |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| ISO/TR 17671-3:2002 | Welding Recommendations for welding of metallic materials Part 3: Arc welding of stainless steels |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| UNE-EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| I.S. EN ISO 15609-1:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| DIN EN 15085-2:2008-01 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
| UNI EN ISO 15609-1 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| BS EN 13480-5:2017 | Metallic industrial piping Inspection and testing |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 1011-5:2003-10 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 5: WELDING OF CLAD STEEL |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
| BS EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys |
| DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN 1011-7:2004 | Welding. Recommendations for welding of metallic materials Electron beam welding |
| DIN EN 13941:2003-10 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DIRECT HEATING |
| EN 1011-5:2003 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
| DIN EN ISO 14555:2017-10 | WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 1011-7:2004 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 12732 : 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| EN 12953-2:2012 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| I.S. EN 15085-4:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS |
| I.S. EN 15085-3:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| DEFSTAN 02-875/1(2010) : 2010 | WELD OVERLAY CLADDING AND HARDFACING FOR NAVAL APPLICATIONS |
| DEFSTAN 02-706/2(2010) : 2010 | WELDING & FABRICATION OF SHIP STRUCTURE FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| 14/30293465 DC : 0 | BS EN 13445-10 - UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
| PD CEN/TR 13445-101:2015 | Unfired pressure vessels. Example of application |
| I.S. EN ISO 15614-1:2017 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
| 13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| 09/30186922 DC : 0 | BS EN ISO 13585 - BRAZING - BRAZER QUALIFICATION |
| UNI EN 1708-3 : 2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
| 16/30336476 DC : 0 | BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| PREN 12732 : DRAFT 2009 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| PREN 13480-4 : DRAFT 2011 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PD CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials Guidelines on implementing ISO 3834 |
| 13/30266359 DC : 0 | BS EN ISO 15614-1 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| BS EN 13445-10:2015 | Unfired pressure vessels Additional requirements for pressure vessels of nickel and nickel alloys |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| UNI EN ISO 17639 : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS |
| PREN 764-4 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| BS EN 13445-3 : 2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| I.S. EN 13445-8:2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 13445-10:2015 | UNFIRED PRESSURE VESSELS - PART 10: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF NICKEL AND NICKEL ALLOYS |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| ISO/TR 17671-4:2002 | Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys |
| UNE-CEN ISO/TR 20173:2013 IN | Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009) |
| S.R. CEN ISO/TR 14745:2015 | WELDING - POST-WELD HEAT TREATMENT PARAMETERS FOR STEELS (ISO/TR 14745:2015) |
| I.S. EN 13480-5:2017 | METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
| UNI EN ISO 15614-14 : 2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
| UNE-EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing (Endorsed by Asociación Española de Normalización in September of 2019.) |
| EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| BS EN ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| S.R. CEN ISO/TR 20173:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - AMERICAN MATERIALS |
| DIN EN 15085-4:2008-01 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
| DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| DIN EN 1011-7:2004-10 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
| UNE-EN 12542:2011 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 1011-5:2003 | Welding. Recommendations for welding of metallic materials Welding of clad steel |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| UNE-EN ISO 14555:2017 | Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
| I.S. EN 12542:2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN ISO 15618-1:2016 | QUALIFICATION TESTING OF WELDERS FOR UNDERWATER WELDING - PART 1: HYPERBARIC WET WELDING (ISO 15618-1:2016) |
| DIN EN 12542:2010-12 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
| I.S. EN 12953-2:2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 13480-4:2017 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN ISO 14555:2017 | WELDING - ARC STUD WELDING OF METALLIC MATERIALS (ISO 14555:2017) |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| I.S. EN ISO 15614-8:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 8: WELDING OF TUBES TO TUBE-PLATE JOINTS (ISO 15614-8:2016) |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| UNI EN 15085-3 : 2008 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| UNI EN ISO 15613 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
| UNE-EN ISO 15614-7:2017 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| 00/708222 DC : DRAFT MAY 2000 | BS EN ISO 15614-1 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS -WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
| 12/30259070 DC : 0 | BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| BS PD EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDIZED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| 02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| 08/30184300 DC : DRAFT SEP 2008 | BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| 00/708223 DC : DRAFT MAY 2000 | BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING |
| UNI CEN ISO/TR 3834-6 : 2012 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
| DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
| 10/30217417 DC : 0 | BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| PD CEN ISO/TR 14745:2015 | Welding. Post-weld heat treatment parameters for steels |
| 07/30160966 DC : 0 | BS EN ISO 9606-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Fusion welding of non-alloyed and low-alloyed cast irons |
| PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| 05/30114218 DC : DRAFT FEB 2005 | EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| I.S. EN ISO 13585:2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS (ISO 13585:2012) |
| I.S. CEN ISO TR 20174:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - JAPANESE MATERIALS |
| I.S. EN 13445-3:2014 | UNFIRED PRESSURE VESSELS - PART 3: DESIGN |
| PREN 287-6 : DRAFT 2016 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| UNI EN ISO 13585 : 2012 | BRAZING - QUALIFICATION TEST OF BRAZERS AND BRAZING OPERATORS |
| PREN 287-1 : DRAFT 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| UNE-EN 13445-10:2016 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
| I.S. CEN ISO TR 20173:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - AMERICAN MATERIALS |
| BS EN ISO 15614-7:2016 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Overlay welding |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN ISO 15612:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| I.S. EN ISO 13918:2018 | WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017) |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN ISO 13918:2018 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
| ISO/TR 10809-2:2011 | Cast irons Part 2: Welding |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 14532-2:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN 15085-3:2010-01 | Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
| DIN EN ISO 15609-1:2005-01 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| DIN EN 287-1:2011-11 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DIN EN ISO 17642-3:2005-09 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| BS EN 15085-2:2007 | Railway applications. Welding of railway vehicles and components Quality requirements and certification of welding manufacturer |
| ISO/TR 20174:2005 | Welding Grouping systems for materials Japanese materials |
| BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components Design requirements |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| CEN ISO/TR 20174:2005 | Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005) |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| UNI EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
| I.S. EN 15085-2:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
| UNE-EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
| UNI EN ISO 15614-5 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN ISO 15614-4 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| UNI EN ISO 15614-2 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| EN ISO 15618-1:2016 | Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
| UNI EN 12953-2 : 2012 | SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN ISO 9606-2 : 2006 | Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys |
| I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| UNI EN 287-1 : 2012 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| ONORM EN ISO 17639 : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS (ISO 17639:2003) |
| 16/30336084 DC : 0 | BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
| PD ISO/TR 10809-2:2011 | Cast irons Welding |
| 09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| AWS D14.8M:2009 | STANDARD METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 1708-3:2012 | WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS |
| 16/30335964 DC : 0 | BS EN ISO 15612 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE SPECIFICATION |
| 13/30266377 DC : 0 | BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
| 16/30342991 DC : 0 | BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Laser-arc hybrid welding of steels, nickel and nickel alloys |
| 02/710859 DC : DRAFT SEP 2002 | BS EN 14532-2 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 13445-10:2016-05 | Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys |
| BS EN ISO 17639:2013 | Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds |
| 03/115441 DC : DRAFT OCT 2003 | BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS |
| DIN EN ISO 15614-7:2015-01 (Draft) | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING (ISO 15614-7:2016) |
| I.S. EN 287-6:2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
| UNI EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| BS EN ISO 9606-1:2017 | Qualification testing of welders. Fusion welding Steels |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| UNI EN ISO 15614-3 : 2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
| DIN EN 287-6:2016-03 (Draft) | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| I.S. EN ISO 17639:2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS (ISO 17639:2003) |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| BS EN ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Gas welding |
| ISO/TR 17671-2:2002 | Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels |
| UNI EN ISO 15612 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| ISO/TR 14745:2015 | Welding Post-weld heat treatment parameters for steels |
| UNE-EN ISO 15614-1:2018 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01) |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| I.S. CEN ISO TR 3834-6:2007 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 6: GUIDELINES ON IMPLEMENTING ISO 3834 |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| EN 13445-8 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN ISO 15614-3:2008 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| ISO 15614-7:2016 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding |
| EN 287-6:2018 | Qualification test of welders - Fusion welding - Part 6: Cast irons |
| I.S. CEN TS 14421:2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| BS EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test |
| BS EN 12542:2010 | LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture |
| ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ISO 14555:2017 | Welding — Arc stud welding of metallic materials |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
| BS EN 14532-2:2004 | Welding consumables. Test methods and quality requirements Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
| ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
| ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys |
| ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons |
| BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding Aluminium and aluminium alloys |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| BS EN 13480-4:2017 | Metallic industrial piping Fabrication and installation |
| ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
| UNE-EN 12953-2:2013 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| UNE-EN ISO 15618-1:2017 | Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
| UNE-EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
| UNE-EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.) |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
| UNE-EN ISO 15614-13:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| BS EN 15085-4:2007 | Railway applications. Welding of railway vehicles and components Production requirements |
| BS EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes Externally loaded tests |
| BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 15618-2:2001 | Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of aluminium and its alloys |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings |
| ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
| BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| BS EN ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Finishing welding of aluminium castings |
| ISO 15618-1:2016 | Qualification testing of welders for underwater welding Part 1: Hyperbaric wet welding |
| BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| BS EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Welding of tubes to tube-plate joints |
| BS EN ISO 14555:2017 | Welding. Arc stud welding of metallic materials |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 14555:2017 | Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN 14532-2:2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| EN 1708-3:2012 | Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
| EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
| EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
| EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
| EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 05/30114324 DC : DRAFT FEB 2005 | EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
| UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| 10/30235392 DC : 0 | BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| ISO 13918:2017 | Welding — Studs and ceramic ferrules for arc stud welding |
| 12/30257658 DC : 0 | BS EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS |
| PREN ISO 15614-6 : DRAFT 2003 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| I.S. EN ISO 9606-2:2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| BS EN ISO 13585:2012 | Brazing. Qualification test of brazers and brazing operators |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| DIN EN ISO 17639:2013-12 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
| PREN 13445-8 : DRAFT 2013 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| S.R. CEN/TR 13445-101:2015 | UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| ISO/TR 17671-6:2005 | Welding Recommendations for welding of metallic materials Part 6: Laser beam welding |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| UNE-EN ISO 15614-14:2014 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
| UNE-EN 13445-8:2015 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
| I.S. EN ISO 15614-14:2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
| UNI CEN ISO/TR 17844 : 2012 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| DIN EN 1011-3:2001-01 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC - MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| UNI EN 13445-8 : 2015 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials Arc welding of stainless steels |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| CEN/TR 13445-101:2015 | Unfired pressure vessels - Example of application |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| PD CEN ISO/TR 20173:2009 | Welding. Grouping systems for materials. American materials |
| ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834 |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| DIN EN 12953-2:2012-05 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| BS EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of copper and its alloys |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| BS EN 12953-2:2012 | Shell boilers Materials for pressure parts of boilers and accessories |
| BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| BS EN ISO 15618-1:2016 | Qualification testing of welders for underwater welding Hyperbaric wet welding |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| BS EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
| ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007) |
| CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
| DIN EN ISO 15614-3:2008-06 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 3: FUSION WELDING OF NON-ALLOYED AND LOW-ALLOYED CAST IRONS |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN ISO 15614-5:2004-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| DIN EN ISO 15614-6:2007-01 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
| DIN EN ISO 15613:2004-09 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| DIN EN 287-1:2004-05 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNI EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.) |
| UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| AS/NZS ISO 13918:2020 | Welding - Studs and ceramic ferrules for arc stud welding |
| ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
| AS/NZS 2205.5.1:2019 | Methods for destructive testing of welds in metal Macroscopic and microscopic examination of welds |
| ISO/TR 20174:2005 | Welding Grouping systems for materials Japanese materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.