ISO 630:1995
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Structural steels Plates, wide flats, bars, sections and profiles
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
05-10-2018
Superseded by
Published date
09-11-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Applies to steel plates with thicknesses of 3 mm and over, wide strips in coils with widths greater than or equal to 600 mm, and greater than 6 mm in thickness, wide flats, bars and hot-rolled sections generally used in the as-delivered condition and normally intended for bolted, riveted structures.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN 17100:1980-01 | Similar to |
| NBN EN 124 : 1994 | Identical |
| NBN EN 29519 : 1993 | Identical |
| UNI 7806 : 1979 | Similar to |
| BS 4360:1986 | Similar to |
| DIN EN 10025:1994-03 | Identical |
| BS 7468(1991) : 1991 AMD 8251 | SPECIFICATION FOR RUNGS FOR DOG-STEP LADDERS |
| 11/30249851 DC : 0 | BS ISO 14346 - WELDING - STATIC DESIGN PROCEDURE FOR HOLLOW SECTION JOINTS |
| I.S. EN ISO 28927-9:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
| DIN EN ISO 28927-1:2010-05 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 1: ANGLE AND VERTICAL GRINDERS |
| BS EN ISO 28927-9:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Scaling hammers and needle scalers |
| 13/30275387 DC : 0 | BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES |
| 09/30167109 DC : 0 | BS ISO 3690 - WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL |
| 09/30185894 DC : 0 | BS EN 1344 - CLAY PAVERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| CSA M5700 : 2009 | TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS |
| BS 7823-1:1995 | Pedestal plain bearings Specification for pillow blocks |
| 04/30116142 DC : DRAFT JUL 2004 | ISO 4952 - STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 96/709825 DC : DRAFT JUL 1996 | ISO/CD 6164-2 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 2: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURES OF 31,5 MPA (315 BAR) TO 40 MPA (400 BAR), DN 10 TO DN 80 |
| BS EN 60730-2-8:2002 | Specification for automatic electrical controls for household and similar use. Particular requirements Particular requirements for electrically operated water valves, including mechanical requirements |
| CSA M12003-2 : 2009 : FR | AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS |
| 06/30110083 DC : 0 | ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL |
| CSA M3463 : 2009 | TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - DYNAMIC TEST METHOD AND ACCEPTANCE CONDITIONS |
| BIS IS 13947-5-2 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SPECIFICATION - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 2: PROXIMITY SWITCHES |
| I.S. EN 15609:2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| ISO 10721-1:1997 | Steel structures — Part 1: Materials and design |
| PREN 1825-1 : DRAFT 1995 | INSTALLATIONS FOR SEPARATION OF GREASE - PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| NF ISO 6164 : 2004 | HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE-FLANGE CONNECTIONS FOR USE AT PRESSURES OF 25 MPA AND 40 MPA (250 BAR AND 400 BAR) |
| ISO 7465:2007 | Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
| BS EN 29519:1994 | Shipbuilding and marine structures. Rungs for dog-step ladders |
| BS EN ISO 17652-4:2003 | Welding. Test for shop primers in relation to welding and allied processes Emission of fumes and gases |
| UNE-EN ISO 10545-6:2012 | Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010) |
| EN 15609:2012 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| EN 12979:2002 | Automotive LPG-systems - Installation requirements |
| ISO 3463:2006 | Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditions |
| NF EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| 03/104200 DC : DRAFT MAR 2003 | BS XXXX - DETERMINATION OF THE RESISTANCE TO JET-FIRES OF PASSIVE FIRE PROTECTION MATERIALS |
| DIN EN ISO 28927-3:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| 05/30140423 DC : DRAFT OCT 2005 | ISO 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| DIN EN 15609:2012-07 | LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft |
| BS EN 15609:2012 | LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| BS ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials General requirements |
| ISO 11901-2:2004 | Tools for pressing Gas springs Part 2: Specification of accessories |
| ISO 14347:2008 | Fatigue Design procedure for welded hollow-section joints Recommendations |
| ISO 22762-3:2010 | Elastomeric seismic-protection isolators Part 3: Applications for buildings Specifications |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| I.S. EN ISO 28927-3:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| ISO 12003-2:2008 | Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tractors Part 2: Rear-mounted ROPS |
| UNI ISO 7465 : 2010 | PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 10545-6:2012-05 | Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010) |
| I.S. 742-1:1986 | DOMESTIC SOLID-FUELLED HEATING APPLIANCES - PART 1: SAFETY |
| I.S. EN ISO 10545-6:2012 | CERAMIC TILES - PART 6: DETERMINATION OF RESISTANCE TO DEEP ABRASION FOR UNGLAZED TILES (ISO 10545-6:2010) |
| DIN EN 858-1:2002-05 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| BS 903-A37:1997 | Physical testing of rubber Determination of tendency to adhere to and to corrode metals |
| BS 2654:1984 | Specification for manufacture of vertical steel welded storage tanks with butt-welded shells for the petroleum industry |
| BS 2654:1989 | Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry |
| NF EN 12979 : 2003 | AUTOMOTIVE LPG-SYSTEMS - INSTALLATION REQUIREMENTS |
| BS EN ISO 28927-5 : 2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| UNE-EN ISO 28927-9:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| ISO 17613-1:2006 | Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia |
| 05/30092093 DC : DRAFT JUL 2005 | ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
| ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements |
| ISO 11687-1:1995 | Plain bearings Pedestal plain bearings Part 1: Pillow blocks |
| 96/709826 DC : DRAFT JUL 1996 | ISO/CD 6164-1 - HYDRAULIC FLUID POWER - ONE-PIECE SQUARE-FLANGE CONNECTORS - PART 1: FOUR-SCREW SQUARE-FLANGE CONNECTORS FOR USE AT PRESSURE OF 25MPA (250 BAR) TO 35 MPA (350 BAR), DN 10 TO DN 63 |
| 09/30182064 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| BS ISO 12003-2:2008 | Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors Rear-mounted ROPS |
| 93/110634 DC : DRAFT DEC 1993 | PREN 1345 - SPECIFICATION FOR CLAY PAVERS AND ACCESSORIES FOR RIGID PAVING |
| UNE-EN ISO 28927-5:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
| 03/308003 DC : DRAFT JUNE 2003 | ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
| 02/705788 DC : 0 | ISO 14347 - FATIGUE DESIGN PROCEDURE FOR WELDED HOLLOW SECTION JOINTS - RECOMMENDATIONS |
| 06/30125306 DC : 0 | EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| UNI ISO 11901-2 : 2012 | TOOLS FOR PRESSING - GAS SPRINGS - PART 2: SPECIFICATION OF ACCESSORIES |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| BS ISO 14347:2008 | Fatigue. Design procedure for welded hollow-section joints. Recommendations |
| BS ISO 17613-1:2006 | Manually operated pumps for drinking water. Selection and acceptance Southeast Asia |
| 14/30304016 DC : 0 | BS ISO 7061 - SHIPS AND MARINE TECHNOLOGY - ALUMINIUM SHORE GANGWAYS FOR SEAGOING VESSELS |
| 95/101288 DC : DRAFT FEB 1995 | PREN 1825-1 - INSTALLATIONS FOR SEPARATION OF GREASE - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| ISO 22762-2:2010 | Elastomeric seismic-protection isolators Part 2: Applications for bridges Specifications |
| 17/30334050 DC : 0 | BS ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| CSA M12003-1:2009 | AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROPS |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| BS 7823-3:1995 | Pedestal plain bearings Specification for centre flange bearings |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| 09/30193520 DC : 0 | BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF) |
| CSA M12003-2 : 2009 | AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS |
| BS ISO 11901-2:2004 | Tools for pressing. Gas springs Specification of accessories |
| CSA M12003-2 : 2009 : R2014 | AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS |
| BS ISO 12003-1:2008 | Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors Front-mounted ROPS |
| CSA C22.2 NO. 60947-5-2:14 (R2019) | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches (Bi-national standard, with UL 60947-5-2) |
| NF EN 60947 5-2 : 2008 AMD 1 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| I.S. EN 60730-2-8:2002 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| BS ISO 22762-3:2005 | Elastomeric seismic-protection isolators Applications for buildings. Specifications |
| ISO 4952:2006 | Structural steels with improved atmospheric corrosion resistance |
| UNI EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMERS AND NEEDLE SCALERS |
| ISO 12003-1:2008 | Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tractors Part 1: Front-mounted ROPS |
| ISO 10721-2:1999 | Steel structures — Part 2: Fabrication and erection |
| DIN EN 1433:2005-09 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
| ISO 10545-6:2010 | Ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles |
| UL 60730-2-8:2ED 2007-02-28 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements |
| UNI EN ISO 10545-6 : 2012 | CERAMIC TILES - PART 6: DETERMINATION OF RESISTANCE TO DEEP ABRASION FOR UNGLAZED TILES |
| I.S. EN 12979:2002 | AUTOMOTIVE LPG-SYSTEMS - INSTALLATION REQUIREMENTS |
| ISO 6930-2:2004 | High yield strength steel plates and wide flats for cold forming Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
| NF EN ISO 28927-5 : 2010 AMD 1 2015 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS |
| BS EN ISO 28927-3:2009 | Hand-held portable power tools. Test methods for evaluation of vibration emission Polishers and rotary, orbital and random orbital sanders |
| 99/702254 DC : DRAFT JAN 1999 | ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
| 09/30188568 DC : 0 | BS ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
| 12/30244455 DC : 0 | BS ISO 16858 - SHIPS AND MARINE TECHNOLOGY - LOOSE GEAR OF LIFTING APPLIANCES ON SHIPS - PULLEYS |
| 04/30076756 DC : DRAFT MAY 2004 | ISO 6505 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENDENCY TO ADHERE TO AND CORRODE METALS |
| BS 7825-3.4:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber |
| 08/30190551 DC : 0 | BS ISO 10545-6 - CERAMIC TILES - PART 6: DETERMINATION OF RESISTANCE TO DEEP ABRASION FOR UNGLAZED TILES |
| DIN EN ISO 28927-5:2015-12 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009 + AMD 1:2015) |
| 15/30294700 DC : 0 | BS ISO 19359 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - DESIGN METHODS FOR DRUMS |
| BS EN 15377-1:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems Determination of the design heating and cooling capacity |
| PREN 15609 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| BS ISO 3463:2006 | Tractors for agriculture and forestry. Roll-over protective structures (ROPS). Dynamic test method and acceptance conditions |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| CSA M5700 : 2009 : R2014 | TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS |
| ISO 6930:1983 | High yield strength flat steel products for cold forming |
| DIN EN ISO 28927-9:2010-05 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ISO 11687-3:1995 | Plain bearings Pedestal plain bearings Part 3: Centre flange bearings |
| ISO 5049-1:1994 | Mobile equipment for continuous handling of bulk materials — Part 1: Rules for the design of steel structures |
| API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| DIN ISO 11901-2:2005-09 | TOOLS FOR PRESSING - GAS SPRINGS - PART 2: SPECIFICATION OF ACCESSORIES |
| API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
| BS EN ISO 17652-3:2003 | Welding. Test for shop primers in relation to welding and allied processes Thermal cutting |
| ISO 28927-3:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 3: Polishers and rotary, orbital and random orbital sanders |
| ISO 28927-5:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills |
| BS EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control |
| BS EN ISO 5620-2:1997 | Shipbuilding and marine structures. Filling connection for drinking water tanks Components |
| EN 60730-2-8:2002/A1:2003 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WIRE VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| ISO 17652-4:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 4: Emission of fumes and gases |
| IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
| ISO 17652-3:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 3: Thermal cutting |
| ISO 28927-9:2009 | Hand-held portable power tools Test methods for evaluation of vibration emission Part 9: Scaling hammers and needle scalers |
| IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements |
| ISO 17652-2:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of shop primers |
| BS EN ISO 10545-6:2012 | Ceramic tiles Determination of resistance to deep abrasion for unglazed tiles |
| EN ISO 5620-2:1996 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components (ISO 5620-2:1992) |
| BS EN 1433:2002 | Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity |
| EN ISO 17652-4:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
| EN ISO 28927-3:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| EN ISO 28927-9:2009 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
| EN ISO 17652-3:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
| EN ISO 17652-2:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
| UNI EN ISO 28927-3 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 3: POLISHERS AND ROTARY, ORBITAL AND RANDOM ORBITAL SANDERS |
| I.S. EN 124:1994 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - DESIGN REQUIREMENTS, TYPE TESTING, MARKING, QUALITY CONTROL |
| 03/308002 DC : DRAFT JUNE 2003 | ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| 10/30227635 DC : 0 | BS EN ISO 28927-12 - HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 12: DIE GRINDERS |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| 17/30334047 DC : 0 | BS ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
| 10/30219378 DC : 0 | BS EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS |
| 09/30155614 DC : 0 | BS ISO 15698-1 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 1: REQUIREMENTS |
| CSA M3463 : 2009 : R2014 | TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - DYNAMIC TEST METHOD AND ACCEPTANCE CONDITIONS |
| UNE-EN ISO 28927-3:2010 | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| 14/30292930 DC : 0 | BS EN 60730-2-8:2002+A2 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| BS 7823-2:1995 | Pedestal plain bearings Specification for side flange bearings |
| 14/30304013 DC : 0 | BS ISO 5488 - SHIPS AND MARINE TECHNOLOGY - ACCOMMODATION LADDERS |
| NF EN ISO 28927-9 : 2010 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 9: SCALING HAMMARS AND NEEDLE SCALERS |
| CSA M12003-1 : 2009 : R2014 | AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROPS |
| BS ISO 22762-2:2005 | Elastomeric seismic-protection isolators Applications for bridges. Specifications |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| ISO 24314:2006 | Structural steels Structural steels for building with improved seismic resistance Technical delivery conditions |
| I.S. EN ISO 28927-5:2009 | HAND-HELD PORTABLE POWER TOOLS - TEST METHODS FOR EVALUATION OF VIBRATION EMISSION - PART 5: DRILLS AND IMPACT DRILLS (ISO 28927-5:2009) |
| NF EN 60730 2-8 : 2002 AMD 1 2003 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WATER VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| ISO 1052:1982 | Steels for general engineering purposes |
| UNI EN 15609 : 2012 | LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT |
| ISO 5256:1985 | Steel pipes and fittings for buried or submerged pipe lines External and internal coating by bitumen or coal tar derived materials |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 11687-2:1995 | Plain bearings Pedestal plain bearings Part 2: Side flange bearings |
| BS EN ISO 17652-2:2003 | Welding. Test for shop primers in relation to welding and allied processes Welding properties of shop primers |
| ISO 5620-2:1992 | Shipbuilding and marine structures Filling connection for drinking water tanks Part 2: Components |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| BS EN 13574:2001 | Inland navigation vessels. Permanently installed climbing devices with a length not exceeding 5 m |
| BS EN 12979:2002 | Automotive LPG systems. Installation requirements |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| EN ISO 10545-6:2012 | Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010) |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| EN 13574:2001 | Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| BS 4360:1990 | Specification for weldable structural steels |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
| ISO 377-2:1989 | Selection and preparation of samples and test pieces of wrought steels Part 2: Samples for the determination of the chemical composition |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 377-1:1989 | Selection and preparation of samples and test pieces of wrought steels Part 1: Samples and test pieces for mechanical test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.