ISO 4954:1993
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Steels for cold heading and cold extruding
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
12-12-2018
Superseded by
Language(s)
English, French
Published date
18-02-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Applies to wrought unalloyed and alloyed steels delivered as wire rods, wire or bars. The five sections cover the following topics: general requirements; steels not intended for heat treatment (diameters from 2 mm to 100 mm); case-hardening steels (diameters from 2 mm to 100 mm); steels for quenching and tempering including boron treated steels (diameters from 2 mm to 100 mm); stainless steels (diameters of 2 mm up to 25 mm for ferritic, up to 100 mm for martensitic, and up to 50 mm for austenitic steels).
| DevelopmentNote |
BS DRAFT 91/41353 DC DRAFT ISO/DIS 4954 is also available for this standard. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SAC GB/T 6478 : 2015 | Identical |
| DIN 1654-3:1989-10 | Similar to |
| DIN 1654-2:1989-10 | Similar to |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 03/312638 DC : DRAFT JULY 2003 | ISO 14624-6 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 6: DETERMINATION OF REACTIVITY OF PROCESSING MATERIALS WITH AEROSPACE FLUIDS |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
| 08/30166437 DC : DRAFT JAN 2008 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| 12/30272892 DC : 0 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
| DD ISO/TS 15510:2003 | Stainless steels. Chemical composition |
| ISO/TS 15510:2003 | Stainless steels Chemical composition |
| DIN EN ISO 8249:2000-10 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| ISO 14624-6:2006 | Space systems — Safety and compatibility of materials — Part 6: Determination of reactivity of processing materials with aerospace fluids |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| BS 6787:1987 | Method for determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes |
| EN ISO 8249:2000 | Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| UNI EN ISO 3506-4 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 03/312639 DC : DRAFT JULY 2003 | ISO 14624-7 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 7: DETERMINATION OF PERMEABILITY RATE AND PENETRATION RESISTANCE OF MATERIALS TO AEROSPACE FLUIDS |
| BS ISO 15510:2014 | Stainless steels. Chemical composition |
| DIN ISO 3506:1992-12 | CORROSION-RESISTANT STAINLESS STEEL FASTENERS - SPECIFICATIONS |
| ISO 14624-7:2006 | Space systems — Safety and compatibility of materials — Part 7: Determination of permeability and penetration of materials to aerospace fluids |
| ISO 8249:2000 | Welding Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| ISO 3506:1979 | Corrosion-resistant stainless steel fasteners — Specifications |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 14624-5:2006 | Space systems — Safety and compatibility of materials — Part 5: Determination of reactivity of system/component materials with aerospace propellants |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels Part 11: Case-hardening steels |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| BS ISO 14624-5:2006 | Space systems. Safety and compatibility of materials Determination of reactivity of system/component materials with aerospace propellants |
| BS ISO 14624-6:2006 | Space systems. Safety and compatibility of materials Determination of reactivity of processing materials with aerospace fluids |
| I.S. EN ISO 8249:2000 | WELDING - DETERMINATION OF FERRITE NUMBER (FN) IN AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC CR-NI STAINLESS STEEL WELD METALS |
| BS ISO 14624-7:2006 | Space systems. Safety and compatibility of materials Determination of permeability and penetration of materials to aerospace fluids |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| 03/312637 DC : DRAFT JULY 2003 | ISO 14624-5 - SPACE SYSTEMS - SAFETY AND COMPATIBILITY OF MATERIALS - PART 5: DETERMINATION OF REACTIVITY OF SYSTEM/COMPONENT MATERIALS WITH AEROSPACE PROPELLANTS |
| BS EN ISO 8249:2000 | Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals |
| AWS A4.2M : 2006 | STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS STEEL WELD METAL |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 377-2:1989 | Selection and preparation of samples and test pieces of wrought steels Part 2: Samples for the determination of the chemical composition |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 377-1:1989 | Selection and preparation of samples and test pieces of wrought steels Part 1: Samples and test pieces for mechanical test |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.