ISO 22088-3:2006
Current
Current
The latest, up-to-date edition.
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
10-08-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 22088-3:2006 specifies a method for the determination of the environmental stress cracking (ESC) resistance of thermoplastics when they are subjected to a fixed flexural strain in the presence of chemical agents.
ESC is indicated by the change of a suitably chosen indicative property of specimens that have been strained for a defined time in the environment. The method of test is suitable for determining the resistance of sheets and of flat test specimens, especially the sensitivity of localized surface regions of specimens, to ESC.
This is essentially a ranking test and is not intended to provide data to be used for design or performance prediction.
For a constant strain test, refer to ISO 22088-5. For a constant load test, refer to ISO 22088-2.
| DevelopmentNote |
Supersedes ISO/DIS 22088-3 and ISO 4599 (08/2006)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS 13360 : Part 8 : Sec 9 : 2022 | Identical |
| GOST R ISO 22088-3 : 2010 | Identical |
| NF EN ISO 22088-3 : 2006 | Identical |
| NBN EN ISO 22088-3 : 2006 | Identical |
| NEN EN ISO 22088-3 : 2006 | Identical |
| NS EN ISO 22088-3 : 1ED 2006 | Identical |
| I.S. EN ISO 22088-3:2007 | Identical |
| PN EN ISO 22088-3 : 2007 | Identical |
| SN EN ISO 22088-3 : 2006 | Identical |
| UNI EN ISO 22088-3 : 2006 | Identical |
| SS-EN ISO 22088-3:2006 | Identical |
| UNE-EN ISO 22088-3:2007 | Identical |
| BS EN ISO 22088-3:2006 | Identical |
| EN ISO 22088-3:2006 | Identical |
| DIN EN ISO 22088-3:2006-11 | Identical |
| DIN EN ISO 22088-5:2009-10 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006) |
| UNE-EN ISO 22088-6:2010 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006) |
| 17/30339710 DC : 0 | BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
| 17/30339707 DC : 0 | BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
| I.S. EN ISO 22088-5:2009 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD |
| BS ISO 20753 : 2008 | PLASTICS - TEST SPECIMENS |
| DIN EN ISO 20753:2014-07 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| BS EN ISO 3167:2014 | Plastics. Multipurpose test specimens |
| BS EN ISO 22088-6:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC) Slow strain rate method |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| I.S. EN ISO 13274:2013 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013) |
| ASTM D 7474 : 2017 : REDLINE | Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents |
| UNI EN ISO 22088-6 : 2009 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD |
| ISO 20753:2008 | Plastics Test specimens |
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| UNI EN ISO 20753 : 2014 | PLASTICS - TEST SPECIMENS |
| BS EN ISO 20753:2014 | Plastics. Test specimens |
| DIN EN ISO 22088-2:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006) |
| DIN EN ISO 22088-1:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006) |
| I.S. EN ISO 3167:2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
| I.S. EN ISO 22088-2:2007 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 2: CONSTANT TENSILE LOAD METHOD |
| I.S. EN ISO 22088-4:2007 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD |
| UNI EN ISO 22088-5 : 2009 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 5: CONSTANT TENSILE DEFORMATION METHOD |
| BS EN ISO 13274:2013 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs |
| ISO 21138-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B |
| DIN EN ISO 22088-4:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| ISO 13274:2013 | Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs |
| UNI EN ISO 3167 : 2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS |
| BS EN ISO 22088-5:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC) Constant tensile deformation method |
| UNE-EN ISO 22088-5:2010 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006) |
| DIN EN ISO 13274:2014-06 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS (ISO 13274:2013 + COR. 1:2014) |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| DIN EN ISO 20753 E : 2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| EN ISO 20753:2014 | Plastics - Test specimens (ISO 20753:2008) |
| I.S. EN ISO 22088-6:2009 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 6: SLOW STRAIN RATE METHOD |
| DIN EN ISO 3167:2014-11 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| BS EN ISO 22088-4:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method |
| ISO 22088-6:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 6: Slow strain rate method |
| BS EN ISO 22088-1:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) General guidance |
| ISO 22088-1:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
| ISO 22088-2:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method |
| UNE-EN ISO 13274:2014 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| UNE-EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| ISO 22088-4:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
| EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| EN ISO 22088-4:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| EN ISO 22088-5:2009 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method (ISO 22088-5:2006) |
| EN ISO 22088-2:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method (ISO 22088-2:2006) |
| EN ISO 22088-6:2009 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006) |
| EN ISO 22088-1:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1: General guidance (ISO 22088-1:2006) |
| DIN EN ISO 22088-6:2009-10 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method (ISO 22088-6:2006) |
| 07/30150249 DC : 0 | BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS |
| UNE-EN ISO 20753:2015 | Plastics - Test specimens (ISO 20753:2008) |
| ASTM D 543 : 2014 : REDLINE | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| BS EN ISO 22088-2:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) Constant tensile load method |
| ISO 22088-5:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method |
| ISO 22088-1:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
| ISO 22088-2:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method |
| ISO 22088-5:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 5: Constant tensile deformation method |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 178:2010 | Plastics Determination of flexural properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.