ISO 21013-2:2007
Current
The latest, up-to-date edition.
Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-06-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 21013-2:2007 specifies the requirements for the design, manufacture and testing of nonreclosable pressurerelief devices for cryogenic service, i.e. for operation with cryogenic fluids in addition to operation at temperatures from ambient to cryogenic.
ISO 21013-2:2007 is restricted to burstingdisc and bucklingpin devices not exceeding a size of DN 200 designed to relieve singlephase vapours or gases. A burstingdisc or bucklingpin assembly may be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases.
ISO 21013-2:2007 does not provide methods for determining the capacity of bursting disc or buckling pin devices for a particular cryogenic vessel. Such methods are provided in ISO 21013-3.
| DevelopmentNote |
Supersedes ISO/DIS 21013-2. (06/2007)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 21013-2 : 2007 | Identical |
| BS ISO 21013-2 : 2007 | Identical |
| 13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
| BS EN ISO 16924:2018 | Natural gas fuelling stations. LNG stations for fuelling vehicles |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
| SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| I.S. EN ISO 16924:2018 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016) |
| EN ISO 16924:2018 | Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| ISO 21010:2014 | Cryogenic vessels Gas/materials compatibility |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| ISO 21028-2:2004 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between -80 degrees C and -20 degrees C |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 20421-1:2006 | Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing |
| ISO 21029-1:2004 | Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.