EN 1827:1999+A1:2009
Current
The latest, up-to-date edition.
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
10-06-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Classification
6 Designation
7 Requirements
7.1 General
7.2 Nominal values and tolerances
7.3 Visual inspection
7.4 Materials
7.5 Flammability
7.6 Cleaning and disinfecting
7.7 Filter material
7.8 Finish of parts
7.9 Demountable parts
7.10 Head harness
7.11 Connections
7.12 Exhalation valves
7.13 Packaging
7.14 Mass
7.15 Gas filter capacity
7.16 Particle filter penetration
7.17 Clogging (Optional)
7.18 Compatibility with skin
7.19 Carbon dioxide content of inhalation air
7.20 Breathing resistance without clogging
7.21 Inward leakage
7.22 Field of vision
7.23 Practical performance
8 Testing
8.1 General
8.2 Conditioning
8.3 Visual inspection
8.4 Flammability
8.5 Cleaning and disinfecting
8.6 Exhalation valves (if fitted)
8.7 Gas filter capacity
8.8 Particle filter penetration
8.9 Clogging
8.10 Carbon dioxide content of inhalation air
8.11 Breathing resistance
8.12 Inward leakage
8.13 Practical performance
9 Marking
9.1 Packaging
9.2 Half mask
9.3 Filters
10 Information supplied by the manufacturer
Annex A (informative) - Marking
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements or
other provisions of EU Directives
This European Standard specifies performance requirements, test methods and marking requirements for half masks (re-usable) without inhalation valves and with separable filters (designed for a maximum of single shift use) to protect against gases or gases and particles or particles only. It does not cover devices designed for use in circumstances where there is or might be an oxygen deficiency (oxygen less than 17 % by volume) or for escape purposes.Laboratory and practical performance tests are included for the assessment of compliance with the requirements.
| Committee |
CEN/TC 79
|
| DevelopmentNote |
1999 Edition Re-Issued in June 2009 & incorporates AMD 1 2009. (08/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 1827 : 1999 + A1 2009 | Identical |
| UNI EN 1827 : 2009 | Identical |
| UNE-EN 1827:1999 | Identical |
| UNE-EN 1827:1999+A1:2010 | Identical |
| I.S. EN 1827:1999 | Identical |
| NS EN 1827 : 1999 + A1 2009 | Identical |
| PN EN 1827 : 2004 + A1 2012 | Identical |
| SN EN 1827 : 1999 + A1 2009 | Identical |
| NEN EN 1827 : 1999 + A1 2009 | Identical |
| NF EN 1827 : 1999 + A1 2009 | Identical |
| BS EN 1827 : 1999 | Identical |
| GOST EN 1827 : 2012 | Identical |
| DIN EN 1827:2009-11 | Identical |
| BS EN 1827:1999+A1:2009 | Identical |
| GOST R EN 1827 : 2009 | Identical |
| ISO 16073:2011 | Wildland firefighting personal protective equipment Requirements and test methods |
| EN 133:2001 | Respiratory protective devices - Classification |
| 03/112290 DC : DRAFT AUG 2003 | BS EN 529 - RESPIRATORY PROTECTIVE DEVICES - RECOMMENDATIONS FOR SELECTION, USE, CARE AND MAINTENANCE - GUIDANCE DOCUMENT |
| S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
| BS EN 133:2001 | Respiratory protective devices. Classification |
| I.S. EN 133:2002 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| BS 4275:1997 | Guide to implementing an effective respiratory protective device programme |
| BS ISO 16073:2011 | Wildland firefighting personal protective equipment. Requirements and test methods |
| BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
| EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| DIN EN 133:2002-02 | RESPIRATORY PROTECTIVE DEVICES - CLASSIFICATION |
| DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| EN 13274-7:2008 | Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
| EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
| EN 149:2001+A1:2009 | Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
| ISO 6941:2003 | Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.