DIN EN 20187:1993-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paper, board and pulps; standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990); German version EN 20187:1993
Hardcopy , PDF
01-02-2023
German, English
01-11-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
National foreword
Foreword
Specification
Introduction
1. Scope
2. Normative references
3. Definitions
4. Principle
5. Standard atmosphere
6. Conditioning procedure
7. Test report
Annexes
A. (normative) Measurement of temperature and relative
humidity
B. (informative) Interdependence of temperature and
relative humidity
C. (informative) Bibliography
Table
B.1 Change in relative humidity (r.h.) per 0.5 deg C
change in temperature while water vapour content
remains constant
National annexes
NA (informative) Committees responsible
This standard is included in DIN Handbook 118/4 and 275. Specifies the standard atmosphere for conditioning, and for testing pulp, paper and board, and also the procedures for measuring the temperature and relative humidity. Also gives definitions and annexes.
| DevelopmentNote |
Supersedes DIN ISO 187 (08/2002)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 20187 : 1994 | Identical |
| EN 20187:1993 | Identical |
| BS EN 20187:1993 | Identical |
| UNI EN 20187 : 1994 | Identical |
| SN EN 20187 : 1994 | Identical |
| ISO 187:1990 | Identical |
| I.S. EN 20187:1994 | Identical |
| UNE-EN 20187:1994 | Identical |
| NF EN 20187 : 1993 | Identical |
| NBN EN 20187 : 1994 | Identical |
| DIN 10259:1998-06 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
| DIN HDBK 275 : 2ED 2003 | PAPIER, PAPPE UND FASERSTOFF 4 - DIN EN ISO 186 BIS DIN EN ISO 15755 SOWIE DIN EN 20187 BIS DIN EN 27965-1 |
| DIN EN ISO 3035:2012-02 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| DIN ISO 3039:2011-06 | Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
| DIN ISO 1924-3:2007-06 | Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005) |
| DIN EN ISO 535:2014-06 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| DIN EN ISO 11140-3:2009-09 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| DIN ISO 2965:2012-07 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2009) |
| DIN 10370:1998-06 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
| DIN ISO 11476:2017-10 | PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016) |
| DIN 55475:1997-03 | Auxiliary means of packaging - Tapes from kraftpaper - Not reinforced or reinforced, water or heat activatable; requirements and testing |
| DIN EN ISO 1974:2012-09 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| DIN ISO 20370:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009) |
| DIN ISO 15754:2010-04 | Paper and board - Determination of z-directional tensile strength (ISO 15754:2009) |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN ISO 7263:2011-05 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| DIN HDBK 118/4 : 4ED 2013 | PAPIER, PAPPE UND FASERSTOFF 4 - DIN EN ISO 186 BIS DIN EN ISO 15755 SOWIE DIN EN 20187 BIS DIN EN 27213 |
| DIN ISO 20369:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009) |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 3037:2013-12 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| DIN EN ISO 5270:2013-02 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| DIN EN ISO 2759:2014-10 | Board - Determination of bursting strength (ISO 2759:2014) |
| DIN EN ISO 12625-8:2011-04 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 2758:2014-12 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| DIN EN ISO 12625-7:2014-08 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
| DIN EN ISO 216:2007-12 | WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| DIN ISO 3034:2016-08 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| DIN EN ISO 1924-2:2009-05 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| DIN 55428-1:1998-07 | SOLID FIBREBOARD - REQUIREMENTS AND TESTING |
| DIN 52924-2:1999-09 | TESTING OF PAPER AND BOARD - DETERMINATION OF EXTRACTABLE CONSTITUENTS - PART 2: DETERMINATION OF SOLUBLE EXTRACTABLE SUBSTANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.