CSA C22.4 PACKAGE : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
Available format(s)
Hardcopy , PDF
Superseded date
14-07-2021
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
C22.4 No. 1-09 - Objective-based industrial electrical code
Preface
0 Object
1 Scope
2 Reference publications
3 Definitions
4 Protection for safety
5 Design
6 Selection of electrical equipment
7 Erection and verification of electrical installations
8 Operation and maintenance
Annexes
A (normative) - Electrical equipment selection criteria
B (informative) - Technical references
C22.4 No. 2-09 - Objective-based industrial electrical code -
Safety management system requirements
Preface
0 Object
1 Scope
2 Reference publications
3 Definitions
4 Safety management system for the objective-based
industrial electrical code
5 Top management responsibility
6 Resource management
7 Electrical installation realization
8 Monitoring and measurement, control, analysis, and
improvement
Annexes
A (normative) - Electrical equipment selection criteria
Contains: C22.4 No. 1-09 - Objective-based industrial electrical code; and C22.4 No. 2-09 - Objective-based industrial electrical code - Safety management system requirements.
| DevelopmentNote |
Includes CSA C22.4.1 & CSA C22.4.2. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| ISA 61241-10 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| ISA 60079-7 : 2008 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E" |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC 60038:2009 | IEC standard voltages |
| CSA C22.4 No. 2 : 2009 | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS |
| ISA 60079-5 : 1998 | EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q' |
| ISA RP2.1 : 1978 | MANOMETER TABLES |
| ISA 5.4 : 1991 | INSTRUMENT LOOP DIAGRAMS |
| ISA 12.10 : 1988 | AREA CLASSIFICATION IN HAZARDOUS (CLASSIFIED) DUST LOCATIONS |
| ISA 60079-27 : 2006 | FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO) |
| ISA 61241-18 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCAPSULATION "MD" |
| CSA ISO 14001 : 2016 | ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| ISA 5.5 : 1985 | GRAPHIC SYMBOLS FOR PROCESS DISPLAYS |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| ISA 61241-1 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD" |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| NETA MTS : 2011 | MAINTENANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| ISA 60079-1 : 2005 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
| ISA 61241-2 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY PRESSURIZATION "PD" |
| IEC 61241-11:2005 | Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD' |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| ISA 5.2 : 1976 | BINARY LOGIC DIAGRAMS FOR PROCESS OPERATIONS |
| ISA TR12.2 : 1995 | INTRINSICALLY SAFE SYSTEM ASSESSMENT USING THE ENTITY CONCEPT |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| ISA RP12.4 : 1996 | PRESSURIZED ENCLOSURES |
| ISA RP12.12.03 : 2002 | PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS |
| ISA 60079-18 : 2005 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION "M" |
| IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| ISA RP12.2.02 : 1996 | RECOMMENDATIONS FOR THE PREPARATION, CONTENT, AND ORGANIZATION OF INTRINSIC SAFETY CONTROL DRAWINGS |
| ISA 5.3 : 1983 | GRAPHIC SYMBOLS FOR DISTRIBUTED CONTROL/SHARED DISPLAY INSTRUMENTATION, LOGIC AND COMPUTER SYSTEMS |
| IEC 60079-27:2008 | Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| ISA 60079-6 : 1998 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY OIL-IMMERSION 'O' |
| IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| IEC 61241-18:2004 | Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD' |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| CSA C22.4 No. 1 : 2009(R2018) | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE |
| CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| IEC 61241-4:2001 | Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD" |
| ISA 7.0.01 : 1996 | QUALITY STANDARD FOR INSTRUMENT AIR |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| ISA 20 : 1981 | SPECIFICATION FORMS FOR PROCESS MEASUREMENT AND CONTROL INSTRUMENTS, PRIMARY ELEMENTS AND CONTROL VALVES |
| ISA 60079-0 : 2005 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISA 5.1 : 1984 | INSTRUMENTATION SYMBOLS AND IDENTIFICATION |
| ISA TR20.00.01 : 2006 | SPECIFICATION FORMS FOR PROCESS MEASUREMENT AND CONTROL INSTRUMENTS - PART 1: GENERAL CONSIDERATIONS |
| ISA 61241-11 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY INTRINSIC SAFETY "ID" |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60079-26:2014 RLV | Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| ISA 60079-15 : 2003 | EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N" |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.