ASTM A 47/A47M : 1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Ferritic Malleable Iron Castings
Available format(s)
PDF
Language(s)
English
Published date
10-08-1999
Superseded date
11-11-2014
Superseded by
£60.92
Excluding VAT
CONTAINED IN VOL. 01.02, 2017 Defines ferritic malleable castings for general engineering usage at temperatures from normal ambient to approximately 400 degrees C (750 degrees F).
| Committee |
A 04
|
| DevelopmentNote |
Supersedes ASTM A 47. (04/2002)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers ferritic malleable castings for general engineering usage at temperatures from normal ambient to approximately 750°F.
1.2 No precise quantitative relationship can be stated between the properties of the iron in various locations of the same casting and those of a test specimen cast from the same iron (see Appendix X1.).
Note-A complete metric companion to Specification A47 has been developed-A47M; therefore, no metric equivalents are presented in this specification.| MIL-DTL-52404 Revision C:2010 | Connections: Hose, Fire and Water |
| MIL-DTL-3962-6 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON, 8 INCH |
| ISO 6182-12:2014 | Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems |
| ASTM D 5933 : 1996 | Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
| MIL-DTL-17060 Revision G:2009 | Motors, Alternating Current, Integral-Horsepower, Shipboard Use |
| KKK-W-291 Revision G:2016 | Wheelbarrows (Future acquisitions for this material should refer to A-A-3135) |
| AASHTO M 111M/M 111 : 2014 | SPECIFICATION FOR ZINC (HOT-DIP GALVANIZED) COATINGS ON IRON AND STEEL PRODUCTS |
| ASTM A 338 : 1984 : R2009 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| ASTM A 338 : 1984 : R2014 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 338 : 1984 : R2004 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| MIL-DTL-3124 Revision E:2014 | Generator, Alternating Current, 60-Hertz (Naval Shipboard Use) |
| A-A-59432 Revision B:2015 | Plugs, Pipe, Magnetic, Headless: Iron, Steel or Aluminum Alloy |
| AASHTO LRFDLTS 1 : 1900 | LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| ASTM F 1476 : 2007 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| AWWA E103 : 2015 | HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM A 338 : 1984 : R1998 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| ASTM A 1072/A1072M :2011 | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| ANSI/ASSP A10.8 : 2011 | SCAFFOLDING SAFETY REQUIREMENTS |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.3:2016 | PROCESS PIPING |
| FF-C-450 Revision G:2017 | Clamps, Wire Rope |
| 16/30328642 DC : 0 | BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS |
| MIL-DTL-32373 Base Document:2011 | Plug, Machine Thread, Magnetic: Drain |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM D 5933 : 1996 : R2007 | Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
| MSS SP 110 : 2010 | BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS |
| MIL-PRF-12125 Revision H:2011 | Valve, Gate: Quick-Opening, Class 125 Cast Iron, with Position Lock |
| ASTM D 5933 : 1996 : R2013 | Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
| MSS SP 131 : 2017 | METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES |
| MIL-DTL-29210-1 Base Document:2010 | Hose Assembly, Iron, Brass, and CRES Connectors, Rubber, Metal Lined, Wire Reinforced, .750 and 1.00 Inch Hose, 250 PSIG, Saturated Steam Service |
| MIL-DTL-29210 Revision E:2009 | Hose Assembly, Rubber, Metal Lined, Wire Reinforced, 250 PSIG, Saturated Steam Service |
| MIL-DTL-3962-2 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON 4 INCH |
| MIL-DTL-3962-4 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON, 6 INCH |
| ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ACI 313 : 2016 | DESIGN SPECIFICATION FOR CONCRETE SILOS AND STACKING TUBES FOR STORING GRANULAR MATERIALS AND COMMENTARY |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| MSS SP 116 : 2014 | SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
| ASTM A 1072/A1072M : 2011 : R2015 | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products |
| ANSI/ASSE A10.8 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.8 AMERICAN NATIONAL STANDARD - SCAFFOLDING SAFETY REQUIREMENTS (FOR VERSIONS 2001 AND 2011) |
| MIL-DTL-29210-2 Base Document:2010 | Hose Assembly, Iron, Brass, and CRES Connectors, Rubber, Metal Lined, Wire Reinforced, 1.250, 1.500, and 2.000 Inch Hose, 250 PSIG, Saturated Steam Service |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| MIL-DTL-3390 Revision H:2011 | Rings, Dee |
| A-A-59553 Revision A:2012 | Coupling Halves, Cap and Wye; Quick Disconnect Pneumatic Hose, Two-Lug Universal Type |
| A-A-52303 Revision A:2011 | Hooks, Boat, Ball Point |
| CSA O86S1 : 2005 | ENGINEERING DESIGN IN WOOD |
| ASTM F 432 : 2013 : REDLINE | Standard Specification for Roof and Rock Bolts and Accessories |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| MSS SP 88 : 2015 | DIAPHRAGM VALVES |
| ASTM A 123/A123M : 2017 : REDLINE | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM D 5933 : 1996 : R2001 | Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| FED-STD-123 Revision H:2007 | Marking for Shipment (Civil Agencies) |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM A 644 : 2017 : REDLINE | Standard Terminology Relating to Iron Castings |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.