TIA 464 : C2002(R2009)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
TELECOMMUNICATIONS - MULTILINE TERMINAL SYSTEMS - REQUIREMENTS FOR PBXSWITCHING EQUIPMENT
19-05-2009
09-04-2025
1. INTRODUCTION
2. SCOPE
3. DEFINITIONS
3.1 Switching Techniques
3.2 Mu-Law Interface
3.3 Private Branch Exchange
3.4 Satellite PBX
3.5 Voiceband Transmission Requirements
3.6 Abbreviations
4. TECHNICAL REQUIREMENTS
4.1 Central Office - PBX Trunk Interface
4.2 Tie-Trunk Interface
4.3 Station Identification
4.4 Message Registration
4.5 Station Interfaces
4.6 Address Signalling
4.7 Call Progress Signalling
4.8 Transmission Parameters
4.9 Power Failure Transfer (PFT)
4.10 Digital Signaling and Supervision
4.11 Synchronization
4.12 Electrical and Physical Characteristics of the 1.544
Mb/s PBX Interface
4.13 Signal Formats for 1.544 Mb/s Facilities
5. APPLICATION NOTES
5.1 AIOD
5.2 REN Scaling
Appendix A References
Appendix B Alternative Dial Pulse Criteria
Appendix C Cable Characteristics
Numerous Figures
Defines requirements for Private Branch Exchange (PBX) systems.
| Committee |
TR-41.1
|
| DocumentType |
Standard
|
| PublisherName |
Telecommunications Industry Association
|
| Status |
Withdrawn
|
| SCTE 165-11 : 2009 | IPCABLECOM 1.5 - PART 11: ANALOG TRUNKING FOR PBX SPECIFICATION |
| TIA/EIA TSB 31 : D2011 ADD 4 2016 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT RATIONALE AND MEASUREMENT GUIDELINES FOR U.S. NETWORK PROTECTION |
| TIA 470.110 : E2018 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TRANSMISSION REQUIREMENTS FOR ANALOG TELEPHONES WITH HANDSETS |
| ATIS T1.605 : 91(R1999) | ISDN BASIC ACCESS INTERFACE FOR S AND T REFERENCE POINTS AND LAYER 1 SPECIFICATION |
| IEEE 661 : 1979 | METHOD FOR DETERMINING OBJECTIVE LOUDNESS RATINGS OF TELEPHONE CONNECTIONS |
| TIA/EIA 579 : A1998 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TRANSMISSION REQUIREMENTS FOR DIGITAL WIRELINE TELEPHONES |
| ATIS T1.508 : 2003 | LOSS PLAN FOR DIGITAL NETWORKS |
| ATIS T1.607 : 2000(R2004) | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - LAYER 3 SIGNALING SPECIFICATION FOR CIRCUIT SWITCHED BEARER SERVICE FOR DIGITAL SUBSCRIBER SIGNALING SYSTEM NUMBER 1 (DSS1) |
| ATIS T1.401 : 2000 SUPP B 2002 | NETWORK TO CUSTOMER INSTALLATION INTERFACES - ANALOG VOICEGRADE SWITCHED ACCESS LINES USING LOOP-START AND GROUND START SIGNALING |
| ATIS T1.403 : 99 SUPP B 2002 | NETWORK AND CUSTOMER INSTALLATION INTERFACES - DS1 - ELECTRICAL INTERFACE |
| ATIS T1.601 : 1999 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - BASIC ACCESS INTERFACE FOR USE ON METALLIC LOOPS FOR APPLICATION ON THE NETWORK SIDE OF THE NT (LAYER 1 SPECIFICATION) - FOR TELECOMMUNICATIONS |
| ISO/IEC 11572:2000 | Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Circuit mode bearer services — Inter-exchange signalling procedures and protocol |
| ATIS T1.602 : 96(R2004) | ISDN - DATA-LINK LAYER SIGNALING SPECIFICATION FOR APPLICATION AT THE USER-NETWORK INTERFACE |
| ISO/IEC 11582:2002 | Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Generic functional protocol for the support of supplementary services — Inter-exchange signalling procedures and protocol |
| ISO/IEC 11579-1:1994 | Information technology — Telecommunications and information exchange between systems — Private integrated services network — Part 1: Reference configuration for PISN Exchanges (PINX) |
| ATIS T1.403.01 : 99(R2005) | NETWORK AND CUSTOMER INSTALLATION INTERFACES - INTEGRATED SERVICES DIGITAL NETWORK (ISDN) PRIMARY RATE LAYER 1 ELECTRICAL INTERFACE SPECIFICATION |
| TIA/EIA 810 : B2006 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TRANSMISSION REQUIREMENTS FOR NARROWBAND DIGITAL TELEPHONES |
| ATIS T1.411 : 2001 | NETWORK-TO-CUSTOMER INSTALLATION INTERFACES - ANALOG VOICEGRADE ENHANCED 911 SWITCHED ACCESS USING NETWORK-PROVIDED REVERSE-BATTERY SIGNALING |
| TIA/EIA 571 : C2015 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT ELECTRICAL, THERMAL MECHANICAL ENVIRONMENTAL PERFORMANCE REQUIREMENTS |
| TIA/EIA TSB 31 : D2011 ADD 4 2016 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT RATIONALE AND MEASUREMENT GUIDELINES FOR U.S. NETWORK PROTECTION |
| TIA 689 : A2003(R2009) | TELECOMMUNICATIONS MULTILINE TERMINAL SYSTEMS PBX AND KTS SUPPORT OF ENHANCED 9-1-1 EMERGENCY CALLING SERVICE |
| ATIS T1.107 : 2002 SUPP A 2005 | DIGITAL HIERARCHY - FORMATS SPECIFICATIONS |
| ATIS T1.231 : 2003 | LAYER 1 IN-SERVICE DIGITAL TRANSMISSION PERFORMANCE MONITORING |
| ATIS T1.101 : 1999 | SYNCHRONIZATION INTERFACE STANDARD |
| TIA 968 : B2009 ADD 3 2016 | TELECOMMUNICATIONS TELEPHONE TERMINAL EQUIPMENT TECHNICAL REQUIREMENTS FOR CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK- Addendum 3 |
| ISO/IEC 11573:1994 | Information technology — Telecommunications and information exchange between systems — Synchronization methods and technical requirements for Private Integrated Services Networks |
| TIA/EIA TSB 123 : A2006(R2011) | TELECOMMUNICATIONS - MULTILINE TERMINAL SYSTEMS - NORTH AMERICAN TEST PLAN FOR MULTIVENDOR QSIG INTEROPERABILITY TESTING |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.