TAPPI/ANSI T 402 sp:2013
Current
Current
The latest, up-to-date edition.
STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-04-2013
$95.88
Including GST where applicable
1. Scope
2. Significance
3. Standard atmospheres
4. Apparatus
5. Procedure
6. Report
7. Keywords
8. Additional information
Appendix A: Importance of preconditioning
Literature cited
References
Describes the standard atmospheres for normal preconditioning, conditioning, and testing of paper and paper products, paperboard, fiberboard, and containers made from them.
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
Technical Association of the Pulp & Paper Industry
|
| Status |
Current
|
| Supersedes |
| TAPPI T 817 : OM 89 | VIBRATION TEST FOR FIBERBOARD SHIPPING CONTAINERS |
| TAPPI T 528 : 0 | SOLVENT HOLDOUT OF ELECTROPHOTOGRAPHIC BASE PAPER |
| TAPPI T 573 : 2015 | ACCELERATED TEMPERATURE AGING OF PRINTING AND WRITING PAPER BY DRY OVEN EXPOSURE APPARATUS |
| A-A-2838 Base Document:1993 | Napkins, Paper, Dispenser (No S/S Document) |
| TAPPI T 569 : 2014 | INTERNAL BOND STRENGTH (SCOTT TYPE) |
| TAPPI T 496 : 2013 | SPECIMEN PREPARATION FOR CROSS DIRECTIONAL INTERNAL TEARING RESISTANCE FOR PAPER, PAPERBOARD AND RELATED MATERIALS |
| TAPPI T 830 : 2011 | INK RUB TEST OF CONTAINER BOARD AND CORRUGATED BOARD |
| TAPPI T 218 : 2011 | FORMING HANDSHEETS FOR REFLECTANCE TESTS OF PULP (BUCHNER FUNNEL PROCEDURE) |
| TAPPI T 536 : 2012 | RESISTANCE OF PAPER TO PASSAGE OF AIR (HIGH-PRESSURE GURLEY METHOD) |
| TAPPI T 257 : 2014 | SAMPLING AND PREPARING WOOD FOR ANALYSIS |
| TAPPI UM 542 : 2015 | AMOUNT OF COATING ON MINERAL-COATED PAPER |
| ANSI INCITS 182 : 1990 : R2002 | INFORMATION SYSTEMS - GUIDELINE FOR BAR CODE PRINT QUALITY |
| A-A-2789 Base Document:1993 | NAPKINS, PAPER, QUARTER-FOLDED (NO S/S DOCUMENT) |
| TAPPI T 578 : 2011 | ACCELERATED LIGHT AGING OF PRINTING AND WRITING PAPER BY XENON-ARC EXPOSURE APPARATUS |
| TAPPI T 512 : 2012 | CREASING OF FLEXIBLE PACKAGING MATERIAL PAPER SPECIMENS FOR TESTING |
| TAPPI T 558 : 2015 | SURFACE WETTABILITY AND ABSORBENCY OF SHEETED MATERIALS USING AN AUTOMATED CONTACT ANGLE TESTER |
| TAPPI T 465 : 2006 | STATIC CREASING OF PAPER FOR WATER VAPOR TRANSMISSION TESTS |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| TAPPI T 244 : 2011 | ACID-INSOLUBLE ASH IN WOOD, PULP, PAPER, AND PAPERBOARD |
| TAPPI T 476 : 2011 | ABRASION LOSS OF PAPER AND PAPERBOARD (TABER-TYPE METHOD) |
| TAPPI T 511 : 2013 | FOLDING ENDURANCE OF PAPER (MIT TESTER) |
| ASTM E 171 : 1994 : R2007 | Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
| ASTM F 1308 : 1998 : R2008 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| TAPPI T 494 : 2013 | TENSILE PROPERTIES OF PAPER AND PAPERBOARD (USING CONSTANT RATE OF ELONGATION APPARATUS) |
| TAPPI T 674 : CM 85 | TESTING ADHESIVES USED IN GLUED LAP JOINTS OF CORRUGATED FIBERBOARD CONTAINERS |
| TAPPI T 548 : PM 90 | COEFFICIENT OF STATIC FRICTION OF UNCOATED WRITING AND PRINTING PAPER BY USE OF THE INCLINED PLANE METHOD |
| TAPPI T 542 : OM 88 | COEFFICIENT OF FRICTION (ANGLE OF SLIDE) OF PACKAGING PAPERS (INCLINED PLANE METHOD) |
| TAPPI T 550 : 2013 | DETERMINATION OF EQUILIBRIUM MOISTURE IN PULP, PAPER AND PAPERBOARD FOR CHEMICAL ANALYSIS |
| A-A-230 Revision B:1997 | MAT, BATH (DISPOSABLE) (NO S/S DOCUMENT) |
| G-E-550 Revision C:1985 | ENVELOPE, PHOTOGRAPHIC NEGATIVE, PAPER (S/S BY A-A-54939) |
| MIL-B-13239 Revision G:1977 | Barrier Material, Waterproofed, Flexible, all Temperatures, heat Sealable (No S/S Document) |
| BS ISO 1004-1:2013 | Information processing. Magnetic ink character recognition Print specifications for E13B |
| PPP-P-291 Revision E:1976 | PAPERBOARD, WRAPPING AND CUSHIONING (S/S BY A-A-1051) |
| TAPPI T 451 : 0 | FLEXURAL PROPERTIES OF PAPER (CLARK STIFFNESS) |
| TAPPI T 575 : 2013 | ROUGHNESS OF PAPER AND PAPERBOARD, STYLUS (EMVECO-TYPE) METHOD |
| TAPPI/ANSI T 272 sp:2012 | FORMING HANDSHEETS FOR REFLECTANCE TESTING OF PULP (SHEET MACHINE PROCEDURE) |
| TAPPI T 576 : 2007 | TENSILE PROPERTIES OF TOWEL AND TISSUE PRODUCTS (USING CONSTANT RATE OF ELONGATION APPARATUS) |
| TAPPI T 800 : 2006 | DRUM TEST FOR FIBERBOARD SHIPPING CONTAINERS (REVOLVING HEXAGONAL DRUM) |
| TAPPI T 565 : 0 | CONTACT ANGLE OF WATER DROPLETS ON CORONA-TREATED POLYMER FILM SURFACES |
| TAPPI T 461 : 2009 | FLAME RESISTANCE OF TREATED PAPER AND PAPERBOARD |
| TAPPI T 423 : 2007 | FOLDING ENDURANCE OF PAPER (SCHOPPER TYPE TESTER) |
| TAPPI T 807 : 2011 | BURSTING STRENGTH OF LINERBOARD |
| TAPPI T 500 : 2007 | BOOK BULK AND BULKING NUMBER OF PAPER |
| TAPPI T 572 : 2013 | ACCELERATED POLLUTANT AGING OF PRINTING AND WRITING PAPER BY POLLUTION CHAMBER EXPOSURE APPARATUS |
| TAPPI T 410 : 2013 | GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA) |
| CGSB-43.146 : 2002 | DESIGN, MANUFACTURE AND USE OF INTERMEDIATE BULK CONTAINERS FOR THE TRANSPORTATION OF DANGEROUS GOODS |
| TAPPI T 812 : 2013 | PLY SEPARATION OF SOLID AND CORRUGATED FIBERBOARD (WET) |
| ASTM D 4369 : 1992 | Specification for Boxed Facial Tissue for Industrial and Institutional Use (Withdrawn 1999) |
| TAPPI T 837 : 0 | MEASURING THE BOND STRENGTH OF A GLUED MANUFACTURER'S JOINT |
| ASTM E 171 : 1994 : R2002 | Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
| ASTM D 4431 : 1992 | Standard Specification for Paper Towels for Industrial and Institutional Use (Withdrawn 2000) |
| ASTM E 171 : 1994 : R1998 | Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials |
| TAPPI T 431 : 2010 | INK ABSORBENCY OF BLOTTING PAPER |
| ASTM F 1308 : 1998 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| TAPPI T 404 : 1992 | TENSILE BREAKING STRENGTH AND ELONGATION OF PAPER AND PAPERBOARD (USING PENDULUM-TYPE TESTER) |
| TAPPI T 547 : 2012 | AIR PERMEANCE OF PAPER AND PAPERBOARD (SHEFFIELD METHOD) |
| TAPPI T 230 : 2013 | VISCOSITY OF PULP (CAPILLARY VISCOMETER METHOD) |
| L-T-100 Revision B:1988 | Tape, Pressure-Sensitive Adhesive, Polyester Film |
| TAPPI UM 555 : 2015 | TESTING OF GREASE-REPELLANT TREATED PAPER |
| TAPPI T 495 : 2013 | BENDING NUMBER OF PAPERBOARD |
| G-D-331 Revision D:1974 | DICTIONARIES, ENGLISH (S/S BY A-A-3107) |
| TAPPI T 458 : 2014 | SURFACE WETTABILITY OF PAPER (ANGLE OF CONTACT METHOD) |
| TAPPI T 556 : 2011 | BENDING RESISTANCE OF PAPER AND PAPERBOARD BY SINGLE-POINT BENDING METHOD |
| TAPPI T 840 : 2010 | TESTING ADHESIVES USED IN GLUED LAP JOINTS OF CORRUGATED FIBERBOARD CONTAINERS |
| A-A-2840 Base Document:1993 | Napkins, Paper, Dinner, Two-Ply (No S/S Document) |
| ASTM F 1308 : 1998 : R2014 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ANSI INCITS 182 : 1990 : R2007 | INFORMATION SYSTEMS - GUIDELINE FOR BAR CODE PRINT QUALITY |
| ANSI INCITS 62 : 1987 : R2002 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - PAPER USED IN OCR SYSTEMS |
| TAPPI UM 579 : 2015 | WATER REPELLENCE OF PAPER AND BOARDS |
| ANSI INCITS 62 : 1987 : R2017 | INFORMATION SYSTEMS - OPTICAL CHARACTER RECOGNITION (OCR) - PAPER USED IN OCR SYSTEMS |
| ASTM D 3905 : 1993 | Standard Specification for Toilet Tissue for Industrial and Institutional Use (Withdrawn 2000) |
| TAPPI T 491 : 2013 | WATER IMMERSION NUMBER OF PAPERBOARD |
| TAPPI T 841 : 2003 | EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD USING THE MORRIS METHOD (SHORT COLUMN TEST) |
| TAPPI T 570 : 0 | RESISTANCE TO MECHANICAL PENETRATION OF SANITARY TISSUE PAPERS (BALL BURST PROCEDURE) |
| TAPPI T 812 : 2013(R2019) | PLY SEPARATION OF SOLID AND CORRUGATED FIBERBOARD (WET) |
| TAPPI T 517 : OM 89 | DYNAMIC STRENGTH OF FLEXIBLE BARRIER MATERIAL SEALS |
| TAPPI T 1001 : 0 | FORMING INSULATING BOARDS FOR PHYSICAL TESTS |
| TAPPI T 838 : 2012 | EDGE CRUSH TEST USING NECKDOWN |
| ASTM F 1308 : 1998 : R2018 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| ASTM D 4560 : 1992 | Specification for Paper Napkins for Industrial and Institutional Use (Withdrawn 1999) |
| TAPPI T 507 : 1999 | GREASE RESISTANCE OF FLEXIBLE PACKAGING MATERIALS |
| TAPPI T 845 : 2014 | WET PIN ADHESION OF CORRUGATED BOARD BY SELECTIVE SEPARATION |
| TAPPI T 551 : 2012 | THICKNESS OF PAPER AND PAPERBOARD (SOFT PLATEN METHOD) |
| TAPPI T 836 : 2013 | BENDING STIFFNESS, FOUR POINT METHOD |
| TAPPI T 465 : 2006 : R2010 | STATIC CREASING OF PAPER FOR WATER VAPOR TRANSMISSION TESTS |
| TAPPI T 516 : 2000 | ENVELOPE SEAL, SEAM, AND WINDOW PATCH TESTING |
| A-A-897 Revision A:1993 | PAPER PLACE MAT OR PAPER TRAY COVER (PAPER, DOILY) (NO S/S DOCUMENT) |
| TAPPI T 828 : PM 89 | COEFFICIENT OF KINETIC FRICTION BETWEEN CORRUGATING MEDIUM AND A HEATED STEEL SURFACE |
| TAPPI T 432 : 2009 | WATER ABSORBENCY OF BIBULOUS PAPERS |
| TAPPI T 498 : CM 85 | SOFTNESS OF SANITARY TISSUES |
| TAPPI T 820 : 1985 | FLEXURAL STIFFNESS OF CORRUGATED BOARD |
| TAPPI T 466 : CM 82 | DEGREE OF CURL AND SIZING OF PAPER |
| TAPPI UM 823 : 2015 | TESTING ADHESIVES USED IN GLUED LAP JOINTS OF CORRUGATED FIBERBOARD CONTAINERS |
| MIL-B-37173 Base Document:1975 | Box, Setup, Mailing, Dental (S/S by A-A-54793) |
| TAPPI T 819 : 2007 | WATER ABSORPTION OF CORRUGATING MEDIUM: BOAT METHOD |
| TAPPI T 549 : 2013 | COEFFICIENTS OF STATIC AND KINETIC FRICTION OF UNCOATED WRITING AND PRINTING PAPER BY USE OF THE HORIZONTAL PLANE METHOD |
| TAPPI T 816 : 0 | COEFFICIENT OF STATIC FRICTION OF CORRUGATED AND SOLID FIBERBOARD (HORIZONTAL PLANE METHOD) |
| TAPPI T 260 : OM 85 | TEST TO EVALUATE THE AGEING PROPERTIES OF BLEACHED CHEMICAL PULPS |
| TAPPI T 546 : 2015 | MACHINE-DIRECTION GRAMMAGE VARIATION MEASUREMENT (GRAVIMETRIC METHOD) |
| TAPPI T 442 : 0 | SPECTRAL REFLECTANCE FACTOR, TRANSMITTANCE, AND COLOR OF PAPER AND PULP (POLYCHROMATIC ILLUMINATION) |
| TAPPI T 459 : 2013 | SURFACE STRENGTH OF PAPER (WAX PICK TEST) |
| MIL-B-43611 Revision B:1990 | Bags, Paper, Waxed (Field Bread) (No S/S Document) |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| LLL-C-001491 Base Document:1969 | CASE, FILING, TRANSFER, KNOCKDOWN (NO S/S DOCUMENT) |
| TAPPI T 545 : 2011 | CROSS-MACHINE GRAMMAGE PROFILE MEASUREMENT (GRAVIMETRIC METHOD) |
| TAPPI T 479 : 1999 | SMOOTHNESS OF PAPER (BEKK METHOD) |
| ASTM D 1749 : 1993 : R2007 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Withdrawn 2010) |
| TAPPI T 552 : 2007 | DETERMINATION OF WETTING TENSION OF POLYOLEFIN FILMS AND COATED SURFACES VIA THE MAYER ROD TECHNIQUE |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
| TAPPI T 1003 : CM 83 | FLEXURAL RESISTANCE AND DEFLECTING OF INSULATING BOARD |
| TAPPI T 454 : 2015 | TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| TAPPI UM 200 : 2012 | BRIGHTNESS LOSS OF BLEACHED PULP |
| TAPPI T 815 : 2012(R2018) | COEFFICIENT OF STATIC FRICTION (SLIDE ANGLE) OF PACKAGING AND PACKAGING MATERIALS (INCLUDING SHIPPING SACK PAPERS, CORRUGATED AND SOLID FIBERBOARD) (INCLINED PLANE METHOD) |
| TAPPI T 826 : 2013 | SHORT SPAN COMPRESSIVE STRENGTH OF CONTAINERBOARD |
| A-A-2837 Base Document:1993 | Napkins, Paper, Dinner, Three-Ply (No S/S Document) |
| TAPPI UM 596 : 2015 | WATER ABSORBENCY OF NONBIBULOUS PAPERBOARD |
| TAPPI T 559 : 2012 | GREASE RESISTANCE TEST FOR PAPER AND PAPERBOARD |
| TAPPI T 813 : 2004 | TENSILE TEST FOR THE MANUFACTURER'S JOINT OF FIBERBOARD SHIPPING CONTAINERS |
| TAPPI T 530 : 2012 | SIZE TEST FOR PAPER BY INK RESISTANCE |
| ASTM D 1749 : 1993 : R2002 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| ASTM D 1749 : 1993 : R1997 | Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products |
| TAPPI T 470 : OM 89 | EDGE TEARING RESISTANCE OF PAPER (EDGE-TEAR STIRRUP METHOD) |
| TAPPI T 803 : 2010 | PUNCTURE TEST OF CONTAINER BOARD |
| UU-S-48 Revision F:1973 | SACKS, SHIPPING, PAPER |
| A-A-2857 Base Document:1993 | Napkins, Paper, Unbleached (No S/S Document) |
| TAPPI T 831 : 2014 | WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP PENETRATION TEST |
| TAPPI T 460 : 2011 | AIR RESISTANCE OF PAPER (GURLEY METHOD) |
| TAPPI T 839 : 2012 | EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD USING THE CLAMP METHOD (SHORT COLUMN TEST) |
| UU-C-00620 Revision C:1967 | COVER, HEADREST, PAPER (DENTAL CHAIR) (NO S/S DOCUMENT) |
| TAPPI T 503 : OM 89 | COEFFICIENT OF STATIC FRICTION OF SHIPPING SACK PAPERS (INCLINED PLANE METHOD) |
| TAPPI T 822 : 2011 | RING CRUSH OF PAPERBOARD (RIGID SUPPORT METHOD) |
| TAPPI T 824 : 2014 | FLUTED EDGE CRUSH OF CORRUGATING MEDIUM (FLEXIBLE BEAM METHOD) |
| MIL-B-43711 Base Document:1970 | Barrier Material, Waterproof, Flexible, Lumber Protective (No S/S Document) |
| ANSI INCITS 182 : 1990 : R2017 | INFORMATION SYSTEMS - GUIDELINE FOR BAR CODE PRINT QUALITY |
| ANSI X9.100-10 : 2016 | FINANCIAL SERVICES - PAPER FOR MICR DOCUMENTS |
| TAPPI T 453 : 2013 | EFFECT OF DRY HEAT ON PROPERTIES OF PAPER AND BOARD |
| TAPPI T 535 : 0 | BENDING STIFFNESS OF PAPER AND PAPERBOARD (RESONANCE LENGTH METHOD) |
| A-A-52217 Revision C:2012 | Tray, Mess, Compartmented |
| TAPPI T 464 : 2012 | WATER VAPOR TRANSMISSION RATE OF PAPER AND PAPERBOARD AT HIGH TEMPERATURE AND HUMIDITY |
| TAPPI T 441 : 2013 | WATER ABSORPTIVENESS OF SIZED (NON-BIBULOUS) PAPER, PAPERBOARD, AND CORRUGATED FIBREBOARD (COBB TEST) |
| TAPPI T 804 : 2012 | COMPRESSION TEST OF FIBERBOARD SHIPPING CONTAINERS |
| TAPPI UM 590 : 2010 | CREASING (USING STEEL RULES) OF PAPERBOARD FOR WATER VAPOR TRANSMISSION (WVTR) TESTING |
| ANSI X9.18 : 1998 | FINANCIAL SERVICES - PAPER SPECIFICATIONS FOR CHECKS |
| TAPPI T 411 : 2010 | THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD |
| TAPPI T 544 : 2008 | AGING OF PAPER AND BOARD WITH MOIST HEAT |
| TAPPI T 1004 : CM 83 | EDGE NAIL STRENGTH OF INSULATING BOARD |
| TAPPI T 433 : 2012 | WATER RESISTANCE OF SIZED PAPER AND PAPERBOARD (DRY INDICATOR METHOD) |
| ISO 1004-1:2013 | Information processing — Magnetic ink character recognition — Part 1: Print specifications for E13B |
| TAPPI T 555 : 2015 | ROUGHNESS OF PAPER AND PAPERBOARD (PRINT-SURF METHOD) |
| TAPPI T 231 : 2007 | ZERO-SPAN BREAKING STRENGTH OF PULP (DRY ZERO-SPAN TENSILE) |
| TAPPI T 825 : 2014 | FLAT CRUSH TEST OF CORRUGATED BOARD (RIGID SUPPORT METHOD) |
| TAPPI T 521 : CM 85 | BLOCKING RESISTANCE OF GUMMED FLAT PAPERS |
| TAPPI T 698 : 2003 | DETERMINATION OF WETTING TENSION OF POLYETHYLENE AND POLYPROPYLENE FILMS AND COATINGS (MODIFIED VISKING ANALYTICAL TECHNIQUES) |
| TAPPI T 835 : 2014 | WATER ABSORPTION OF CORRUGATING MEDIUM: WATER DROP ABSORPTION TEST |
| TAPPI UM 411 : 2011 | OPACITY OF PAPER USING 45 DEGREE/0 DEGREE GEOMETRY REFLECTOMETER |
| TAPPI T 561 : 0 | SORPTIVE RATE AND CAPACITY OF BIBULOUS PAPER PRODUCTS USING GRAVIMETRIC PRINCIPLES |
| TAPPI T 577 : 2013 | SCORE BEND TEST |
| ASTM F 1308 : 1998 : R2003 | Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products |
| AS/NZS 1301.414s:2006 | Methods of test for pulp and paper Conditioning of paper for testing (Reconfirmed 2017) |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| AS/NZS 1301.415S:2008 | Methods of test for pulp and paper Standard atmosphere for testing paper and board and procedure for monitoring the atmosphere (Reconfirmed 2019) |
| TAPPI T 400 : 2011 | SAMPLING AND ACCEPTING A SINGLE LOT OF PAPER, PAPERBOARD, CONTAINERBOARD, OR RELATED PRODUCT |
| DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
| TAPPI T 205 : 2006 | FORMING HANDSHEETS FOR PHYSICAL TESTS OF PULP |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.