SSPC-SP 5 : 2015
Current
Current
The latest, up-to-date edition.
WHITE METAL BLAST CLEANING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2015
Publisher
$183.34
Including GST where applicable
Describes the requirements for white metal blast cleaning of uncoated or coated steel surfaces by the use of abrasives.
| DevelopmentNote |
Also numbered as NACE 1. (03/2009)
|
| DocumentType |
Standard
|
| ISBN |
1-57590-323-7
|
| Pages |
10
|
| PublisherName |
The Society for Protective Coatings
|
| Status |
Current
|
| Supersedes |
| MIL-STD-2199 Revision A:2010 | Coverings for Waterborne Main Propulsion Shafting on U.S. Naval Surface Ships and Submarines |
| MIL-DTL-11732 Revision F:2010 | Cylinder, Compressed Gas: Chlorine; DOT 3A480 or DOT 3AA480, General Specification for |
| API 652 : 2014 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| MIL-DTL-53072 Revision F:2017 | Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection |
| SSPC-GUIDE 19 : 2012 | SELECTION OF PROTECTIVE COATINGS FOR USE OVER GALVANIZED SUBSTRATES |
| ASTM A 780/A780M : 2009 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| NACE 12/AWS C2.23M/SSPC CS- 23 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| NACE 43114 : 2014 | NONVISIBLE CONTAMINANTS ON RAILCAR SURFACES |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ASTM F 941 : 1999 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| NACE 35108 : 0 | ONE HUNDRED MILLIVOLT (MV) CATHODIC POLARIZATION CRITERION |
| NACE 02107 : 0 | COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| NACE SP 02 98 : 2007 | SHEET RUBBER LININGS FOR ABRASION AND CORROSION SERVICE |
| ASTM F 941 : 1999 : R2005 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| NACE SP 01 91 : 2017 | APPLICATION OF INTERNAL PLASTIC COATINGS FOR OILFIELD TUBULAR GOODS AND ACCESSORIES |
| NASA SSTD 8070 0067 : 2004 | HIGH PRESSURE INDUSTRIAL WATER PIPING 'AG' |
| SSPC-SP 11 : 2012 | POWER-TOOL CLEANING TO BARE METAL |
| MIL-DTL-11733 Revision E:2001 | Cylinder, Compressed Gas: Ammonia, with Valve (DOT 4AA480)(No S/S Document) |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| NACE 6G198 : 0 | WET ABRASIVE BLAST CLEANING |
| 17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| NACE 2 : 1994 : R1999 | NEAR-WHITE METAL BLAST CLEANING |
| NACE WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| ASTM D 7602 : 2011 : R2017 | Standard Practice for Installation of Vulcanized Rubber Linings |
| ASTM D 8104 : 2017 | Standard Guide for Determining Coating Qualification Test Data Applicability |
| ASTM F 941 : 1999 : R2013 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| ASTM D 7602 : 2011 | Standard Practice for Installation of Vulcanized Rubber Linings |
| NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| API 652 CHINESE : 2014 | LINING OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| NACE 02103 : 0 | LIQUID-APPLIED COATINGS FOR HIGH-TEMPERATURE ATMOSPHERIC SERVICE |
| NACE SP 02 95 : 2008 | APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS |
| NACE 6G186 : 0 | SURFACE PREPARATION OF SOLUBLE SALT CONTAMINATED STEEL SUBSTRATES PRIOR TO COATING |
| NACE SP 02 88:2011 | INSPECTION OF LINING APPLICATION IN STEEL AND CONCRETE EQUIPMENT |
| ASTM D 6943 : 2015 : REDLINE | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| API 5L9 : 2001 : R2010 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| SSPC-PS 26.00 : 2016 | Aluminum-Pigmented Epoxy Coating System Materials Standard, Performance-Based; Type I for Use Over Blast Cleaned Steel; Type II for Use Over Hand-Cleaned Steel |
| NACE 12 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| NACE SP 02 87 : 2016 | FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
| ASTM A 780/A780M : 2009 : R2015 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| NACE SP 03 94 : 2013 | APPLICATION, PERFORMANCE, AND QUALITY CONTROL OF PLANT-APPLIED SINGLE-LAYER FUSION-BONDED EPOXY EXTERNAL PIPE COATING |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NACE 11 : 2003 | THIN-FILM ORGANIC LININGS APPLIED IN NEW CARBON STEEL PROCESS VESSELS |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| API RP 652 : 2020 | LININGS OF ABOVEGROUND PETROLEUM STORAGE TANK BOTTOMS |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| SSPC-PA GUIDE 13 : 2006 | GUIDE SPECIFICATION FOR APPLICATION OF COATING SYSTEMS WITH ZINC-RICH PRIMERS TO STEEL BRIDGES |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| SSPC-PA 15 : 2013 | MATERIAL AND PREPARATION REQUIREMENTS FOR STEEL TEST PANELS USED TO EVALUATE THE PERFORMANCE OF INDUSTRIAL COATINGS |
| ASTM F 941 : 1999 : R2009 | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
| API RP 5L9 : 2001 : R2015 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| NACE RP 01 80 : 2001 | CATHODIC PROTECTION OF PULP AND PAPER MILL EFFLUENT CLARIFIERS |
| NACE WJ 1 CHINESE : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| SSPC-SP WJ 1 : 2012 | WATERJET CLEANING OF METALS - CLEAN TO BARE SUBSTRATE |
| NACE SP 03 98 : 2015 | RECOMMENDATIONS FOR TRAINING AND QUALIFYING PERSONNEL AS RAIL CAR COATING AND LINING INSPECTORS |
| ACI 351.1R : 2012 | REPORT ON GROUTING BETWEEN FOUNDATIONS AND BASES FOR SUPPORT OF EQUIPMENT & MACHINERY |
| SSPC-GUIDE 15 : 2013 | FIELD METHODS FOR EXTRACTION AND ANALYSIS OF SOLUBLE SALTS ON STEEL AND OTHER NONPOROUS SUBSTRATES |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| NACE 2 : 1994 : R2006 | NEAR-WHITE METAL BLAST CLEANING |
| API 17U : 2015 | RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT |
| API 5L9:2001 | EXTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE |
| NACE SP 01 98 : 2016 | CONTROL OF CORROSION UNDER THERMAL INSULATION AND FIREPROOFING MATERIALS - A SYSTEMS APPROACH |
| NACE 35103 : 0 | EXTERNAL STRESS CORROSION CRACKING OF UNDERGROUND PIPELINES |
| NACE 14C296 : 0 | A STATE-OF-THE-ART REPORT ON PROTECTIVE COATINGS FOR MITIGATING CORROSION UNDER INSULATION ON RAIL TANK CARS |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| PIP CTSL1000 EEDS : 2017 | Electronic Entry Data Sheets for the Application of Internal Linings |
| NACE SP0398:2023 | Recommendations for Training and Qualifying Personnel as Rail Car Coating and Lining Inspectors |
| NACE SP0113:2023 | Pipeline Integrity Management: Methods Selection and Implementation |
| SSPC-CS 23.00 : 2016 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.