SAE J525_201609
Current
Current
The latest, up-to-date edition.
WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
09-09-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCES
3. MANUFACTURE
4. DIMENSIONS AND TOLERANCES
5. MANUFACTURING STANDARDS
6. MATERIAL
7. MECHANICAL PROPERTIES
8. PERFORMANCE REQUIREMENTS
9. TEST CERTIFICATES
10. CLEANLINESS
11. CORROSION PROTECTION
12. PACKAGING
13. NOTES
This SAE Standard covers normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.
| DocumentType |
Revision
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| ANSI Z21.69 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| CSA 6.8 : 2005 | PILOT GAS FILTERS |
| CSA 12.56 : 1999 | MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS |
| SAE J514/1:2022 | Metallic Connections for Fluid Power and General Use - Part 1: 37 Degree Flared Fittings |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| ANSI Z21.79 : 1997 : INC : ADD A : 2005 : R2012 | GAS APPLIANCES SEDIMENT TRAPS |
| CSA/ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| CSA 6.16 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
| CSA/ANSI Z21.80 : 2011 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| CSA/ANSI Z21.15 : 2009 : INC : ADD A : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ASTM F 1197 : 2000 | Standard Specification for Sliding Watertight Door Control Systems |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
| ANSI Z21.79 : 1997 : R2012 | GAS APPLIANCES SEDIMENT TRAPS |
| CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 | PILOT GAS FILTERS |
| CSA CGA 6.21 : 1997 : INC : ADD A : 2005 | GAS APPLIANCE SEDIMENT TRAPS |
| CSA CGA 6.21 : 1997 : R2012 | GAS APPLIANCE SEDIMENT TRAPS |
| ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| SAE J 2592 : 2013 | CARBON STEEL TUBING FOR GENERAL USE - UNDERSTANDING NONDESTRUCTIVE TESTING FOR CARBON STEEL TUBING |
| CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| ANSI Z21.23:2010 | GAS APPLIANCE THERMOSTATS |
| CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| SAE J 2467 : 2020 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| CSA 9.1 : 2009 : INC : ADD A : 2012 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA 9.1 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.23 : 2010 : R2015 | GAS APPLIANCE THERMOSTATS |
| CSA 9.1 : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ASTM F 1197 : 2000 : R2012 | Standard Specification for Sliding Watertight Door Control Systems |
| CSA CGA 6.21 : 1997 : INC : ADD B : 2010 : R2016 | GAS APPLIANCE SEDIMENT TRAPS |
| CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
| CSA/ANSI Z21.15:2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
| CSA 12.56 : 1999 : R2018 | MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| SAE J1065_201605 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| CGA 6.8 : M95 ADDENDA B 2000 | GAS FILTERS ON APPLIANCES |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2012 | GAS APPLIANCES SEDIMENT TRAPS |
| ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2017 | GAS APPLIANCES SEDIMENT TRAPS |
| CSA/ANSI Z21.80:2011 | LINE PRESSURE REGULATORS |
| CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
| SAE J533_201702 | FLARES FOR TUBING |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| ASTM F 1197 : 2000 : R2007 | Standard Specification for Sliding Watertight Door Control Systems |
| CSA CGA 6.21 : 1997 | GAS APPLIANCE SEDIMENT TRAPS |
| ASME B16.44:2023 | Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi |
| CSA/ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| CSA/ANSI Z21.71:1993 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE J403_201406 | CHEMICAL COMPOSITIONS OF SAE CARBON STEELS |
| SAE J409_199502 | PRODUCT ANALYSIS—PERMISSIBLE VARIATIONS FROM SPECIFIED CHEMICAL ANALYSIS OF A HEAT OR CAST OF STEEL |
| SAE J 1453/2 : 2015 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J 2592 : 2013 | CARBON STEEL TUBING FOR GENERAL USE - UNDERSTANDING NONDESTRUCTIVE TESTING FOR CARBON STEEL TUBING |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| SAE J1065_201605 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| SAE J 1453/3 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
| SAE J514_201201 | HYDRAULIC TUBE FITTINGS |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
| SAE J533_201702 | FLARES FOR TUBING |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.