SAE AMS5659S
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
Available format(s)
Hardcopy , PDF
Superseded date
07-10-2021
Superseded by
Language(s)
English
Published date
15-08-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, flash welded rings, and extrusions in the solution heat treated condition (see8.3) 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 144 in2(930 cm2), and stock of any size for forging, flash welded rings, or extruding (see8.6).
| Committee |
AMS F
|
| DevelopmentNote |
Supersedes SAE AMS 5658 (07/1999)
|
| DocumentType |
Revision
|
| Pages |
10
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE MA 4098 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 204 DEGREE C, 35000 KPA, HYDRAULIC AND PNEUMATIC, METRIC |
| MS39206 Revision G:2012 | ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| SAE AS 4388 : 2013 | HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| SAE AMS S 6090 : 2006 | STEEL CARBURIZING AND NITRIDING, PROCESSES FOR |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING |
| SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
| MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
| SAE AS 5960 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| SAE AS 4604 : 2003 | HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| SAE AS 18280/2 : 2006 | SLEEVE, INTERNALLY OR EXTERNALLY SWAGED OR WELDED, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
| NASM 23460 : 2004 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING |
| SAE AS 1576 : 2016 | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
| SAE MA 620 : 2015 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT METRIC |
| SAE AS 4060 : 2013 | TUBE FITTINGS SWAGED JOINT, ROLLER EXPANDER, MANUAL PROCESS, REQUIREMENTS FOR |
| SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
| SAE AS 4098 : 2013 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HEAVY DUTY, METALLIC REINFORCED, 400 DEGREE F, 5000 PSI HYDRAULIC AND PNEUMATIC |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
| SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
| SAE MA 614 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
| SAE AMS 5659/H1025 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| MIL-DTL-13220 Revision G:2015 | HOOK, SLIP (FOR USE WITH WIRE ROPE OR CHAINS) |
| SAE MA 2060 : 2015 | FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC |
| SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
| TR 4661 : 2009 | AEROSPACE SERIES - HINGES, FLIGHT CONTROLS MATERIALS AND SURFACE TREATMENTS |
| SAE AS 1339 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS 1227 : 2013 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, LOW PRESSURE, UP TO 400 DEGREES F, AIRCRAFT |
| SAE MA 2005 : 2015 | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
| SAE MA 4510 : 2015 | FITTINGS, WELD, FLUID CONNECTION, 35,000 KPA, METRIC |
| SAE AS 4897 : 1994 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| MS27612 Revision M:2013 | ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
| SAE AS 4623 : 2016 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS |
| SAE AS 5356 : 2017 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
| SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| SAE AS 614 : 2017 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 4000 PSI, 400 DEGREES F, HEAVY DUTY, HYDRAULIC AND PNEUMATIC |
| SAE MA 4623 : 2015 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AS 1946 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
| SAE AS4897A:2019 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for<br> |
| SAE AMS 2241 : 2016 | TOLERANCES, CORROSION AND HEAT-RESISTANT STEEL, IRON ALLOY, TITANIUM, AND TITANIUM ALLOY BARS AND WIRE |
| SAE AMS2248H | CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS |
| SAE ARP 1110 : 2015 | MINIMIZING STRESS CORROSION CRACKING IN WROUGHT FORMS OF STEELS AND CORROSION RESISTANT STEELS AND ALLOYS |
| SAE AMS 5659/H1025 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| SAE AMS 2806D : 2013 | IDENTIFICATION BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS, CARBON AND ALLOY STEELS AND CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| SAE ARP 1917 : 2002 | CLARIFICATION OF TERMS USED IN AEROSPACE METALS SPECIFICATIONS |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS 2374 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
| SAE AS 6279 : 2016 | STANDARD PRACTICE FOR PRODUCTION, DISTRIBUTION, AND PROCUREMENT OF METAL STOCK |
| SAE AMS2808E | IDENTIFICATION FORGINGS |
| SAE AMS 2315 : 2013 | DETERMINATION OF DELTA FERRITE CONTENT |
| SAE AMS 2300 L : 2015 | STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| SAE AMS7490Q | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.