PREN 416 : DRAFT 2017
Current
The latest, up-to-date edition.
GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
28-11-2017
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of appliances
5 Constructional requirements
6 Operational requirements
7 Energy Efficiency
8 Requirements of energy efficiency
(rational use of energy)
9 Risk assessment
10 Marking and instructions
Annex A (informative) - National situations
Annex B (informative) - Typical Systems
Annex C (informative) - Equivalence rules
Annex D (informative) - Calculation of the mass flow
rate of flue gases
Annex E (informative) - Identification of the types
of gas in use in various countries
Annex F (normative) - Special national conditions
Annex G (normative) - Calculation of conversions
of NO[X]
Annex H (informative) - National situations of countries
whose national bodies are CEN associate members
Annex J (informative) - Radiometer design
Annex K (informative) - Radiometer calibration
Annex L (normative) - Correction of measured radiant
output for absorption by H[2]O and CO[2]
Annex M (informative) - Radiant heat output data -
Recording of results
Annex N (informative) - Worked example
Annex O (normative) - Flue test probes
Annex P (normative) - Product information related to
Ecodesign Regulation No 2015/1188
Annex Q (informative) - Derivation of equations to
determine thermal efficiency
Annex R (normative) - Flue gas heat exchanger
Annex S (normative) - Uncertainty of measurements
Annex T (informative) - Different types of heat input control
Annex ZA (informative) - Relationship between this
European standard and the essential requirements
of Regulation EU 2016/426 aimed to be covered
Annex ZB (informative) - Relationship between this
European Standard and the ecodesign requirements
of Commission Regulation (EU) No 2015/1188
aimed to be covered
Bibliography
Describes the requirements and test methods for the construction, safety, classification, marking and efficiency of non-domestic gas-fired overhead radiant tube heaters incorporating a single burner and multiple burner systems.
Committee |
TC 180
|
DocumentType |
Draft
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
17/30363953 DC : DRAFT OCT 2017 | Identical |
DIN EN 416:2017-12 (Draft) | Identical |
NEN EN 416 : DRAFT 2017 | Identical |
17/30363953 DC : 0 | Identical |
EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
ISO 274:1975 | Copper tubes of circular section — Dimensions |
EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN 13216-1:2004 | Chimneys - Test methods for system chimneys - Part 1: General test methods |
ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 126:2012 | Multifunctional controls for gas burning appliances |
EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
EN 60730-2-1 : 97 AMD 11 2005 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
EN 12828:2012+A1:2014 | Heating systems in buildings - Design for water-based heating systems |
IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 60730-2-5:2015 | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN ISO 6976:2016 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
EN 1106:2010 | Manually operated taps for gas burning appliances |
EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
EN 257:2010 | Mechanical thermostats for gas-burning appliances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.