NFPA 1 : 2021
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIRE CODE
Hardcopy
03-10-2023
English, Spanish, Castilian
23-02-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Chapter 1 Administration 1.1 Scope. 1.2 Purpose. 1.3 Application. 1.4 Equivalencies, Alternatives, and Modifications. 1.5 Units. 1.6 Enforcement. 1.7 Authority. 1.8 Duties and Powers of the Incident Commander. 1.9 Liability. 1.10 Fire Code Board of Appeals. 1.11 Records and Reports. 1.12 Permits and Approvals. 1.13 Certificates of Fitness. 1.14 Plan Review. 1.15 Technical Assistance. 1.16 Notice of Violations and Penalties. 1.17 Permit Fees. Chapter 2 Referenced Publications 2.1 General. 2.2 NFPA Publications. 2.3 Other Publications. 2.4 References for Extracts in Mandatory Sections. Chapter 3 Definitions 3.1 General. 3.2 NFPA Official Definitions. 3.3 General Definitions. 3.4 Special Performance-Based Definitions. Chapter 4 General Requirements4.1 Goals and Objectives. 4.2 Assumptions. 4.3 Compliance Options. 4.4 Fundamental Requirements. 4.5 General Requirements. Chapter 5 Performance-Based Option 5.1 General. 5.2 Performance Criteria. 5.3 Retained Prescriptive Requirements. 5.4 Design Scenarios. 5.5 Evaluation of Proposed Designs. 5.6 Safety Factors. 5.7 Documentation Requirements. Chapter 6 Classification of Occupancy 6.1 Classification of Occupancy. Chapter 7 Reserved Chapter 8 Reserved Chapter 9 Reserved Chapter 10 General Safety Requirements 10.1 Fundamental Requirements. 10.2 Owner/Occupant Responsibilities. 10.3 Occupancy. 10.4 Building Evacuation. 10.5 Fire Drills. 10.6 Reporting of Fires and Other Emergencies. 10.7 Tampering with Fire Safety Equipment. 10.8 Emergency Action Plans. 10.9 Smoking. 10.10 Open Flames, Candles, Open Fires, and Incinerators.10.11 Fire Protection Markings. 10.12 Seasonal and Vacant Buildings and Premises. 10.13 Combustible Vegetation. 10.14 Special Outdoor Events, Carnivals, and Fairs. 10.15 Portable and Vehicle-Mounted Generators. 10.16 Outside Storage. 10.17 Parade Floats. 10.18 Powered Industrial Trucks. 10.19 Storage of Combustible Materials. 10.20 Indoor Play Structures. Chapter 11 Building Services 11.1 Electrical Fire Safety. 11.2 Heating, Ventilation, and Air-Conditioning. 11.3 Elevators, Escalators, and Conveyors. 11.4 Utilities. 11.5 Heating Appliances. 11.6 Waste Chutes, Incinerators, and Laundry Chutes. 11.7 Stationary Generators and Standby Power Systems. 11.8 Smoke Control. 11.9 Emergency Command Center. 11.10 In-Building Emergency Responder Communication Enhancement Systems. 11.11 Medical Gas and Vacuum Systems. 11.12 Photovoltaic Systems. Chapter 12 Features of Fire Protection 12.1 General. 12.2 Construction. 12.3 Fire-Resistive Materials and Construction. 12.4 Fire Doors and Other Opening Protectives. 12.5 Interior Finish.12.6 Contents and Furnishings. 12.7 Fire Barriers. 12.8 Smoke Partitions. 12.9 Smoke Barriers. Chapter 13 Fire Protection Systems 13.1 General. 13.2 Standpipe Systems. 13.3 Automatic Sprinklers. 13.4 Fire Pumps. 13.5 Water Supply. 13.6 Portable Fire Extinguishers. 13.7 Detection, Alarm, and Communications Systems. 13.8 Other Fire Protection Systems. 13.9 Non-Listed Fire Protection or Suppression Devices and Equipment. Chapter 14 Means of Egress 14.1 Application. 14.2 Exit Access Corridors. 14.3 Exits. 14.4 Means of Egress Reliability. 14.5 Door Openings. 14.6 Enclosure and Protection of Stairs. 14.7 Exit Passageways. 14.8 Capacity of Means of Egress. 14.9 Number of Means of Egress. 14.10 Arrangement of Means of Egress. 14.11 Discharge from Exits. 14.12 Illumination of Means of Egress. 14.13 Emergency Lighting. 14.14 Marking of Means of Egress.14.15 Secondary Means of Escape. Chapter 15 Fire Department Service Delivery Concurrency Evaluation 15.1 Application. 15.2 Level of Service Objectives. 15.3 Evaluator Qualifications. 15.4 Fire Department Service Delivery Concurrency Evaluation Documentation. 15.5 Independent Review. 15.6 Approval. Chapter 16 Safeguarding Construction, Alteration, and Demolition Operations 16.1 General Requirements. 16.2 Processes and Hazards. 16.3 Utilities. 16.4 Fire Protection. 16.5 Safeguarding Construction and Alteration Operations. 16.6 Fire Safety During Demolition. 16.7 Torch-Applied Roofing Systems. 16.8 Tar Kettles and Rubberized Asphalt Melters. 16.9 Asbestos Removal. Chapter 17 Wildland Urban Interface 17.1 General. 17.2 Plans. 17.3 Wildland Fire–Prone Areas. Chapter 18 Fire Department Access and Water Supply 18.1 General. 18.2 Fire Department Access. 18.3 Water Supplies. 18.4 Fire Flow Requirements for Buildings. 18.5 Fire Hydrants. Chapter 19 Combustible Waste and Refuse19.1 General. 19.2 Combustible Waste and Refuse. Chapter 20 Occupancy Fire Safety 20.1 Assembly Occupancies. 20.2 Educational Occupancies. 20.3 Day-Care Occupancies. 20.4 Health Care Occupancies. 20.5 Residential Board and Care Occupancies. 20.6 Ambulatory Health Care Centers. 20.7 Detention and Correctional Occupancies. 20.8 Hotels and Dormitories. 20.9 Apartment Buildings. 20.10 Lodging or Rooming Houses. 20.11 One- and Two-Family Dwellings and Manufactured Housing. 20.12 Mercantile Occupancies. 20.13 Business Occupancies. 20.14 Industrial Occupancies. 20.15 Storage Occupancies. 20.16 Special Structures and High-Rise Buildings. 20.17 Historic Buildings and Cultural Resources. Chapter 21 Airports and Heliports 21.1 Hangars. 21.2 Terminals. 21.3 Rooftop Heliport Construction and Protection. Chapter 22 Automobile Wrecking Yards 22.1 General. 22.2 Permits. 22.3 Fire Apparatus Access Roads. 22.4 Welding and Cutting.22.5 Housekeeping. 22.6 Fire Extinguishers. 22.7 Tire Storage. 22.8 Burning Operations. 22.9 Motor Vehicle Fluids and Hazardous Materials. Chapter 23 Cleanrooms 23.1 General. 23.2 Applicability. 23.3 Permits. Chapter 24 Drycleaning 24.1 General. 24.2 Permits. Chapter 25 Grandstands and Bleachers, Folding and Telescopic Seating, Tents, and Membrane Structures 25.1 General. 25.2 Tents. 25.3 Grandstands. 25.4 Folding and Telescopic Seating. 25.5 Permanent Membrane Structures. 25.6 Temporary Membrane Structures. Chapter 26 Laboratories Using Chemicals 26.1 General. 26.2 Permits. Chapter 27 Manufactured Home and Recreational Vehicle Sites 27.1 General. 27.2 Manufactured Home Sites. 27.3 Recreational Vehicle Parks and Campgrounds. Chapter 28 Marinas, Boatyards, Marine Terminals, Piers, and Wharves 28.1 Marinas, Boatyards, and Other Recreational Marine Facilities. 28.2 Marine Terminals, Piers, and Wharves.22.5 Housekeeping. 22.6 Fire Extinguishers. 22.7 Tire Storage. 22.8 Burning Operations. 22.9 Motor Vehicle Fluids and Hazardous Materials. Chapter 23 Cleanrooms 23.1 General. 23.2 Applicability. 23.3 Permits. Chapter 24 Drycleaning 24.1 General. 24.2 Permits. Chapter 25 Grandstands and Bleachers, Folding and Telescopic Seating, Tents, and Membrane Structures 25.1 General. 25.2 Tents. 25.3 Grandstands. 25.4 Folding and Telescopic Seating. 25.5 Permanent Membrane Structures. 25.6 Temporary Membrane Structures. Chapter 26 Laboratories Using Chemicals 26.1 General. 26.2 Permits. Chapter 27 Manufactured Home and Recreational Vehicle Sites 27.1 General. 27.2 Manufactured Home Sites. 27.3 Recreational Vehicle Parks and Campgrounds. Chapter 28 Marinas, Boatyards, Marine Terminals, Piers, and Wharves 28.1 Marinas, Boatyards, and Other Recreational Marine Facilities. 28.2 Marine Terminals, Piers, and Wharves.28.3 Construction, Conversion, Repair, and Lay-Up of Vessels. Chapter 29 Parking Garages 29.1 General. Chapter 30 Motor Fuel Dispensing Facilities and Repair Garages 30.1 Motor Fuel Dispensing Facilities. 30.2 Repair Garages for Vehicles Powered by Flammable and Combustible Liquids. 30.3 Repair Garages for Vehicles Powered by Alternate Fuels. 30.4 Operational Requirements. Chapter 31 Forest Products and Biomass Feedstocks 31.1 General. 31.2 Permits. 31.3 Protection of Storage of Forest Products. Chapter 32 Motion Picture and Television Production Studio Soundstages and Approved Production Facilities 32.1 General. 32.2 Permits. 32.3 Fire Watch. 32.4 Decorative Materials. 32.5 Smoking. 32.6 Pyrotechnic Special Effects and Open Flames. 32.7 Fire Department Access. 32.8 Housekeeping. 32.9 Soundstages and Approved Production Facilities. 32.10 Production Locations. Chapter 33 Outside Storage of Tires 33.1 General. 33.2 Individual Piles. 33.3 Emergency Response Plan. 33.4 Fire Control Measures. 33.5 Site Access.33.6 Signs and Security. 33.7 Outdoor Storage of Altered Tire Material. Chapter 34 General Storage 34.1 General. 34.2 Classification of Commodities. 34.3 Commodity Classes. 34.4 Building Construction. 34.5 Storage Arrangement. 34.6 General Fire Protection. 34.7 Building Equipment, Maintenance, and Operations. 34.8 Protection of Rack Storage. 34.9 Protection of Rubber Tires. 34.10 Protection of Roll Paper. 34.11 Storage of Idle Pallets. Chapter 35 Animal Housing Facilities 35.1 General. 35.2 Permits. Chapter 36 Telecommunication Facilities and Information Technology Equipment 36.1 General. Chapter 37 Fixed Guideway Transit and Passenger Rail Systems 37.1 General. Chapter 38 Cannabis Growing, Processing, or Extraction Facilities 38.1 Application. 38.2 Permits. 38.3 Fire Protection Systems. 38.4 Means of Egress. 38.5 Growing or Production of Cannabis. 38.6 Processing or Extraction. 38.7 Transfilling.Chapter 39 Wastewater Treatment and Collection Facilities 39.1 General. Chapter 40 Dust Explosion and Fire Prevention 40.1 Application. 40.2 Permits. 40.3 Retroactivity. 40.4 General. 40.5 Dust Hazards Analysis (DHA). 40.6 Operating Procedures and Practices. 40.7 Housekeeping. 40.8 Hot Work. 40.9 Personal Protective Equipment. 40.10 Inspection, Testing, and Maintenance. 40.11 Training and Hazard Awareness. 40.12 Contractors. 40.13 Emergency Planning and Response. 40.14 Incident Investigation. 40.15 Management of Change. 40.16 Documentation Retention. 40.17 Management Systems Review. 40.18 Employee Participation. Chapter 41 Welding, Cutting, and Other Hot Work 41.1 General. 41.2 Responsibility for Hot Work. 41.3 Fire Prevention Precautions. 41.4 Sole Proprietors and Individual Operators. 41.5 Public Exhibitions and Demonstrations. 41.6 Arc Welding Equipment. Chapter 42 Refueling42.1 General. 42.2 Automotive Fuel Servicing. 42.3 Storage of Liquids. 42.4 Piping for Liquids. 42.5 Fuel Dispensing Systems. 42.6 Building Construction Requirements. 42.7 Operational Requirements. 42.8 Additional Requirements for CNG, LNG, Hydrogen, and LP-Gas. 42.9 Marine Fueling. 42.10 Aircraft Fuel Servicing. 42.11 Alternate Fuels. 42.12 On-Demand Mobile Fueling. Chapter 43 Spraying, Dipping, and Coating Using Flammable or Combustible Materials 43.1 Application. 43.2 Automated Electrostatic Spray Equipment. 43.3 Handheld Electrostatic Spray Equipment. 43.4 Drying, Curing, or Fusion Processes. 43.5 Miscellaneous Spray Operations. 43.6 Powder Coating. 43.7 Organic Peroxides and Plural Component Coatings. 43.8 Styrene Cross-Linked Composites Manufacturing (Glass Fiber–Reinforced Plastics). 43.9 Dipping, Coating, and Printing Processes. 43.10 Training. Chapter 44 Solvent Extraction 44.1 General. 44.2 Application. 44.3 Permits. 44.4 Special Requirements. Chapter 45 Combustible Fibers 45.1 General. 45.2 Electrical Wiring. 45.3 No Smoking. 45.4 Vehicles and Material Handling Equipment. 45.5 Loose Storage of Combustible Fibers. 45.6 Baled Storage. 45.7 Storage of Hay, Straw, and Other Similar Agricultural Products. 45.8 Hazardous Materials. Chapter 46 Additive Manufacturing (3D Printing) 46.1 Application. 46.2 Nonindustrial Additive Manufacturing. 46.3 Industrial Additive Manufacturing. Chapter 47 Reserved Chapter 48 Reserved Chapter 49 Reserved Chapter 50 Commercial Cooking 50.1 Application. 50.2 General Requirements for Cooking Operations in Buildings and Mobile and Temporary Cooking Operations. 50.3 Protection of Coverings and Enclosure Materials. 50.4 Fire-Extinguishing Equipment for Cooking Operations in Buildings. 50.5 Fire-Extinguishing Equipment for Mobile and Temporary Cooking Operations. 50.6 Procedures for the Use, Inspection, Testing, and Maintenance of Equipment. 50.7 Minimum Safety Requirements for Cooking Equipment. 50.8 Mobile and Temporary Cooking Operations. Chapter 51 Industrial Ovens and Furnaces 51.1 General. 51.2 Location. 51.3 Safety Controls. Chapter 52 Energy Storage Systems52.1 General. 52.2 Remediation Measures. 52.3 System Interconnection. 52.4 Operation and Maintenance. 52.5 Electrochemical Energy Storage Systems. 52.6 Capacitor Energy Storage Systems. 52.7 Fuel Cell Energy Storage Systems. 52.8 Storage of Used or Off-Specification Batteries. 52.9 One- and Two-Family Dwelling and Townhouse Units. Chapter 53 Mechanical Refrigeration 53.1 General. 53.2 Safety Features. 53.3 Operations, Maintenance, Testing, and Decommissioning. Chapter 54 Ozone Gas–Generating Equipment 54.1 Scope. 54.2 Location. 54.3 Piping, Valves, and Fittings. 54.4 Automatic Shutdown. 54.5 Manual Shutdown. Chapter 55 Cleaning and Purging of Flammable Gas Piping Systems 55.1 Application. Chapter 56 Reserved Chapter 57 Reserved Chapter 58 Reserved Chapter 59 Reserved Chapter 60 Hazardous Materials 60.1 General Requirements. 60.2 Special Definitions. 60.3 Classification of Materials, Wastes, and Hazard of Contents.60.4 Permissible Storage and Use Locations. 60.5 Fundamental Requirements. 60.6 Emergency Action Planning, Fire Risk Control, and Chemical Hazard Requirements for Industrial Processes. 60.7 Performance Alternative. Chapter 61 Aerosol Products 61.1 General Provisions. 61.2 Basic Requirements. 61.3 Storage in Warehouses and Storage Areas. 61.4 Mercantile Occupancies. 61.5 Operations and Maintenance. Chapter 62 Reserved Chapter 63 Compressed Gases and Cryogenic Fluids 63.1 General Provisions. 63.2 Building-Related Controls. 63.3 Compressed Gases. 63.4 Cryogenic Fluids. 63.5 Bulk Oxygen Systems. 63.6 Gas Hydrogen Systems. 63.7 Bulk Liquefied Hydrogen Systems. 63.8 Gas Generation Systems. 63.9 Insulated Liquid Carbon Dioxide Systems. 63.10 Storage, Handling, and Use of Ethylene Oxide for Sterilization and Fumigation. 63.11 Carbon Dioxide Beverage Systems. 63.12 Liquid Oxygen in Home Care. Chapter 64 Corrosive Solids and Liquids64.1 General. Chapter 65 Explosives, Fireworks, and Model Rocketry 65.1 General. 65.2 Display Fireworks. 65.3 Pyrotechnics Before a Proximate Audience. 65.4 Flame Effects Before an Audience. 65.5 Fireworks Manufacturing. 65.6 Model Rocketry. 65.7 Rocketry Manufacturing. 65.8 High Power Rocketry. 65.9 Explosives. Chapter 66 Flammable and Combustible Liquids 66.1 General. 66.2 Reserved. 66.3 Definitions. 66.4 Classification of Liquids. 66.5 Reserved. 66.6 Fire and Explosion Prevention and Risk Control. 66.7 Electrical Systems. 66.8 Application of Area Classification. 66.9 Storage of Ignitible (Flammable or Combustible) Liquids in Containers — General Requirements. 66.10 Reserved. 66.11 Reserved. 66.12 Reserved. 66.13 Reserved. 66.14 Hazardous Materials Storage Lockers. 66.15 Outdoor Storage. 66.16 Automatic Fire Protection for Inside Liquid Storage Areas. 66.17 Processing Facilities.66.18 Dispensing, Handling, Transfer, and Use of Ignitible (Flammable or Combustible) Liquids. 66.19 Specific Operations. 66.20 Reserved. 66.21 Storage of Ignitible (Flammable or Combustible) Liquids in Tanks — Requirements for All Storage Tanks. 66.22 Storage of Ignitible (Flammable or Combustible) Liquids in Tanks — Aboveground Storage Tanks. 66.23 Storage of Ignitible (Flammable or Combustible) Liquids in Tanks — Underground Tanks. 66.24 Storage Tank Buildings. 66.25 Storage Tank Vaults. 66.26 Reserved. 66.27 Piping Systems. 66.28 Bulk Loading and Unloading Facilities for Tank Cars and Tank Vehicles. 66.29 Wharves. Chapter 67 Flammable Solids 67.1 General. Chapter 68 Highly Toxic and Toxic Solids and Liquids 68.1 General. Chapter 69 Liquefied Petroleum Gases and Liquefied Natural Gases 69.1 General Provisions. 69.2 LP-Gas Equipment and Appliances. 69.3 Installation of LP-Gas Systems. 69.4 LP-Gas Liquid Transfer. 69.5 Storage of Cylinders Awaiting Use, Resale, or Exchange. 69.6 Vehicular Transportation of LP-Gas. 69.7 LP-Gases at Utility Plants. 69.8 Liquefied Natural Gas (LNG) Facilities.Chapter 70 Oxidizer Solids and Liquids 70.1 General. Chapter 71 Pyrophoric Solids and Liquids 71.1 General. Chapter 72 Unstable (Reactive) Solids and Liquids 72.1 General. Chapter 73 Water-Reactive Solids and Liquids 73.1 General. Chapter 74 Ammonium Nitrate 74.1 General. Chapter 75 Organic Peroxide Solids and Liquids 75.1 General. Annex A Explanatory Material Annex B Sample Ordinance Adopting the NFPA1, Fire Code Annex C Fire Fighter Safety Building Marking System Annex D Fire Fighter Breathing-Air Replenishment Systems Annex E Fire Sprinkler Disclosure Statement for One- and Two-Family Dwellings Annex F Informational References
The scope includes, but is not limited to, the following: (1) Inspection of permanent and temporary buildings, processes, equipment, systems, and other fire and related life safety situations
| DevelopmentNote |
TIA 21-1, Reference: 2.4 and 13.7.4.1.5.3, Issue date: 11-Aug-2020 TIA 21-2, Reference: 2.4, Table A.12.2.1 and F.3, Issue date: 11-Aug-2020 TIA 21-3, Reference: various NFPA 303 extracts, Issue date: 11-Aug-2020 TIA 21-4, Reference: various NFPA 307 extracts, Issue date: 11-Aug-2020 TIA 21-5, Reference: 2.4 and F.3, Issue date: 11-Aug-2020 TIA 21-6, Reference: various NFPA 96 extracts, Issue date: 11-Aug-2020 TIA 21-7, Reference: various NFPA 101 extracts, Issue date: 11-Aug-2020 TIA 21-9, Reference: various NFPA 30 extracts, Issue date: 11-Aug-2020 TIA 21-8, Reference: various NFPA 5000 extracts, Issue date: 11-Aug-2020 TIA 21-10, Reference: various NFPA 30A extracts, Issue date: 11-Aug-2020 TIA 21-11, Reference: A.11.12.2.1.1(a) and (b), Issue date: 03-Dec-2020 TIA 21-12, Reference: 13.3.2.6.1, Issue date: 08-Dec-2021
|
| DocumentType |
Standard
|
| ISBN |
978-145592614-5
|
| Pages |
744
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 820:2024 | Standard for Fire Protection in Wastewater Treatment and Collection Facilities |
| NFPA 30:2024 | Flammable and Combustible Liquids Code |
| NFPA 2:2023 | Hydrogen Technologies Code |
| NFPA 160:2021 | Standard for the Use of Flame Effects Before an Audience |
| NFPA 241:2022 | Standard for Safeguarding Construction, Alteration, and Demolition Operations |
| NFPA 101:2024 | Life Safety Code |
| NFPA 1140:2022 | Standard for Wildland Fire Protection |
| NFPA 10:2022 | Standard for Portable Fire Extinguishers |
| NFPA 318:2022 | Standard for the Protection of Semiconductor Fabrication Facilities |
| NFPA 909:2021 | Code for the Protection of Cultural Resource Properties - Museums, Libraries, and Places of Worship |
| NFPA 495:2023 | Explosive Materials Code |
| NFPA 12:2022 | Standard on Carbon Dioxide Extinguishing Systems |
| NFPA 1194 : 2021 | Standard for Recreational Vehicle Parks and Campgrounds |
| NFPA 318:2025 | Standard for the Protection of Semiconductor Fabrication Facilities |
| NFPA 914:2023 | Code for the Protection of Historic Structures |
| NFPA 704:2022 | Standard System for the Identification of the Hazards of Materials for Emergency Response |
| NFPA 55:2023 | Compressed Gases and Cryogenic Fluids Code |
| NFPA 30B:2023 | Manufacture and Storage of Aerosol Products |
| NFPA 1142:2022 | Standard on Water Supplies for Suburban and Rural Firefighting |
| NFPA 501A:2021 | Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities |
| NFPA 750:2023 | Standard on Water Mist Fire Protection Systems |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| UL 340:6ED 2017-07-24 | Tests for Comparative Flammability of Liquids |
| ISA 61241-10 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| NFPA 1194 : 2018 | RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| API SPEC 12D : 2017 | SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| CFR 33(PTS125-199) : JUL 2017 | NAVIGATION AND NAVIGABLE WATERS |
| NFPA 652 : 2016 | FUNDAMENTALS OF COMBUSTIBLE DUST |
| API 1529 : 1998 | AVIATION FUELING HOSE |
| UL 1803:4ED 2012-02-15 | Factory Follow-Up on Third Party Certified Portable Fire Extinguishers |
| UL 1313:3ED 2015-12-16 | Standard for Nonmetallic Safety Cans for Petroleum Products |
| NFPA 22 : 2013 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| NFPA 495 : 2013 | EXPLOSIVE MATERIALS CODE |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| UL 555:7ED 2006-07-12 | Fire Dampers |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| UL 626:8ED 2005-02-28 | Water Fire Extinguishers |
| NFPA 288 : 2017 | STANDARD METHODS OF FIRE TESTS OF HORIZONTAL FIRE DOOR ASSEMBLIES INSTALLED IN HORIZONTAL FIRE RESISTANCE-RATED ASSEMBLIES |
| IAPMO UNIFORM PLUMBING CODE : 2012 | 2012 UNIFORM PLUMBING CODE |
| CFR 33(PTS1-199) : JUL 89 | NAVIGATION AND NAVIGABLE WATERS |
| API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| UL 9:8ED 2009-07-02 | Standard for Fire Tests of Window Assemblies |
| NFPA 232 : 2017 | PROTECTION OF RECORDS |
| ASTM E 1491 : 2006 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| UL 896:5ED 1993-07-29 | Oil-Burning Stoves |
| FAA AC 150/5390-2 : 2004 | HELIPORT DESIGN |
| UL 1640:4ED 2016-11-14 | Portable Power-Distribution Equipment |
| NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
| ASTM D 1929 : 2016 : REDLINE | Standard Test Method for Determining Ignition Temperature of Plastics |
| NFPA 731 : 2017 | INSTALLATION OF ELECTRONIC PREMISES SECURITY SYSTEMS |
| CFR 21(PTS200-299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 200-299 |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASTM E 1353 : 2016 : REDLINE | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| NFPA 75 : 2017 | FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT |
| NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
| NFPA 241 : 2013 | SAFEGUARDING CONSTRUCTION, ALTERATION, AND DEMOLITION OPERATIONS |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| ASTM D 5391 : 2014 : REDLINE | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023) |
| FM 4996 : 2013 | CLASSIFICATION OF PALLETS AND OTHER MATERIAL HANDLING PRODUCTS AS EQUIVALENT TO WOOD PALLETS |
| NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| NFPA 34 : 2015 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| BHMA A156.3 : 2014 | EXIT DEVICES |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
| NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
| NFPA 1033 : 2014 | PROFESSIONAL QUALIFICATIONS FOR FIRE INVESTIGATOR |
| UL 2208:3ED 2010-07-08 | Standard for Solvent Distillation Units |
| AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| IEC 61340-4-4:2012+AMD1:2014 CSV | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC) |
| NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| NFPA 703 : 2018 | FIRE RETARDANT-TREATED WOOD AND FIRE-RETARDANT COATINGS FOR BUILDING MATERIALS |
| FAA AC 150/5390-3 : 0 | |
| NFPA 1031 : 2014 | PROFESSIONAL QUALIFICATIONS FOR FIRE INSPECTOR AND PLAN EXAMINER |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 102 : 2016 | GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| UL 305:6ED 2012-07-12 | Panic Hardware |
| UL 900:8ED 2015-04-21 | Air Filter Units |
| ISO 10298:2010 | Determination of toxicity of a gas or gas mixture |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 302 : 2010 | PLEASURE AND COMMERCIAL MOTOR CRAFT |
| ASTM D 6448 : 2016 : REDLINE | Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
| UL 1746:3ED 2007-01-17 | Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| AWWA M14 : 3 | RECOMMENDED PRACTICE FOR BACKFLOW PREVENTION AND CROSS-CONNECTION CONTROL |
| UL 2080:1ED 2000-03-14 | Standard for Fire Resistant Tanks for Flammable and Combustible Liquids |
| NFPA 80A : 2017 | PROTECTION OF BUILDINGS FROM EXTERIOR FIRE EXPOSURES |
| NFPA 501 : 2017 | MANUFACTURED HOUSING |
| ASME B31.3:2016 | PROCESS PIPING |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| UL 737:10ED 2011-04-25 | Standard for Fireplace Stoves |
| NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
| ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| NFPA 13R : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN LOW-RISE RESIDENTIAL OCCUPANCIES |
| CGA P 18 : 2013 | STANDARD FOR BULK INERT GAS SYSTEMS |
| UL 8:7ED 2016-11-25 | Water Based Agent Fire Extinguishers |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
| NFPA 2113 : 2012 | SELECTION, CARE, USE, AND MAINTENANCE OF FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST SHORT-DURATION THERMAL EXPOSURES FROM FIRE |
| NFPA 1127 : 2018 | CODE FOR HIGH POWER ROCKETRY |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| NFPA 498 : 2013 | SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES |
| NFPA 3 : 2018 | COMMISSIONING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| ASTM E 108 : 2017 : REDLINE | Standard Test Methods for Fire Tests of Roof Coverings |
| UL 2079:5ED 2015-08-26 | Tests for Fire Resistance of Building Joint Systems |
| UL 10B:10ED 2008-02-07 | Standard for Fire Tests of Door Assemblies |
| CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| CFR 33(PTS200-END) : JUL 2017 | NAVIGATION & NAVIGABLE WATERS |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| NFPA 403 : 2018 | AIRCRAFT RESCUE AND FIRE-FIGHTING SERVICES AT AIRPORTS |
| CGA P 1 : 2015 | STANDARD FOR SAFE HANDLING OF COMPRESSED GASES IN CONTAINERS |
| NFPA 291 : 2016 | FIRE FLOW TESTING AND MARKING OF HYDRANTS |
| NFPA 88A : 2015 | PARKING STRUCTURES |
| UL 1040:1ED 1996-08-09 | Fire Test of Insulated Wall Construction |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| CGA C 6.2 : 2013 | STANDARD FOR VISUAL INSPECTION AND REQUALIFICATION OF FIBER REINFORCED HIGH PRESSURE CYLINDERS |
| NFPA 501A : 2017 | FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES |
| NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 1600 : 2016 | DISASTER/EMERGENCY MANAGEMENT AND BUSINESS CONTINUITY/CONTINUITY OF OPERATIONS PROGRAMS |
| NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
| AWWA G200 : 2015 | DISTRIBUTION SYSTEMS OPERATION AND MANAGEMENT |
| ASTM E 1515 : 2014 : REDLINE | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| NFPA 1123 : 2018 | Code for Fireworks Display<br> |
| UL 79:10ED 2016-04 | Power-Operated Pumps for Petroleum Dispensing Products |
| API 1632 : 1996 | CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS |
| NFPA 1925 : 2013 | MARINE FIRE-FIGHTING VESSELS |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| NFPA 24 : 2016 | INSTALLATION OF PRIVATE FIRE SERVICE MAINS AND THEIR APPURTENANCES |
| ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| NFPA 101A : 2016 | ALTERNATIVE APPROACHES TO LIFE SAFETY |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| UL 1975:3ED 2006-11-27 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
| UL 1037:6ED 2016-09-09 | Antitheft Alarms and Devices |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ISO 8115:1986 | Cotton bales Dimensions and density |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 1122 : 2018 | CODE FOR MODEL ROCKETRY |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| IIAR 7 : 2013 | DEVELOPING OPERATING PROCEDURES FOR CLOSED-CIRCUIT AMMONIA MECHANICAL REFRIGERATING SYSTEMS |
| CGA P 20 : JUNE 2017 | STANDARD FOR CLASSIFICATION OF TOXIC GAS MIXTURES |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| FM 6921 : 2004 | CONTAINERS FOR COMBUSTIBLE WASTE |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ASME A17.3 : 2015 | SAFETY CODE FOR EXISTING ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELECTRIC AND HYDRAULIC ELEVATORS AND ESCALATORS |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| ASTM E 1352 : 2016 : REDLINE | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 2021 : 2015 : REDLINE | Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers |
| ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
| ASTM E 1591 : 2013 | Standard Guide for Obtaining Data for Fire Growth Models |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| IIAR 8 : 2015 ERRATA 2015 | DECOMMISSIONING OF CLOSED-CIRCUIT AMMONIA REFRIGERATION SYSTEMS |
| NFPA 86 : 2015 | OVENS AND FURNACES |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| NSS 1740.16 : 0 | SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS |
| NFPA 1142 : 2017 | WATER SUPPLIES FOR SUBURBAN AND RURAL FIRE FIGHTING |
| ASTM F 2200 : 2017 : REDLINE | Standard Specification for Automated Vehicular Gate Construction |
| NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
| NFPA 260 : 2013 | STANDARD METHODS OF TESTS AND CLASSIFICATION SYSTEM FOR CIGARETTE IGNITION RESISTANCE OF COMPONENTS OF UPHOLSTERED FURNITURE |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| NFPA 13E : 2015 | FIRE DEPARTMENT OPERATIONS IN PROPERTIES PROTECTED BY SPRINKLER AND STANDPIPE SYSTEMS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| NFPA 26 : 1988 | SUPERVISION OF VALVES CONTROLLING WATER SUPPLIES |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA 601 : 2015 | SECURITY SERVICES IN FIRE LOSS PREVENTION |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| NFPA 408 : 2017 | AIRCRAFT HAND PORTABLE FIRE EXTINGUISHERS |
| NFPA 312 : 2011 | FIRE PROTECTION OF VESSELS DURING CONSTRUCTION, CONVERSION, REPAIR, AND LAY-UP |
| NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| UL 10C:3ED 2016-06-09 | Positive Pressure Fire Tests of Door Assemblies |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 610 : 2014 | EMERGENCY AND SAFETY OPERATIONS AT MOTORSPORTS VENUES |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 251 : 2006 | FIRE RESISTANCE OF BUILDING CONSTRUCTION AND MATERIALS |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
| ASTM D 4207 : 1991 | Test Method for Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Withdrawn 1998) |
| NFPA 1037 : 2016 | FIRE MARSHAL PROFESSIONAL QUALIFICATIONS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 4 : 2018 | INTEGRATED FIRE PROTECTION AND LIFE SAFETY SYSTEM TESTING |
| NFPA 261 : 2013 | TEST FOR DETERMINING RESISTANCE OF MOCK-UP UPHOLSTERED FURNITURE MATERIAL ASSEMBLIES TO IGNITION BY SMOLDERING CIGARETTES |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| NFPA 1730 : 2016 | ORGANIZATION AND DEPLOYMENT OF FIRE PREVENTION INSPECTION AND CODE ENFORCEMENT, PLAN REVIEW, INVESTIGATION, AND PUBLIC EDUCATION OPERATIONS TO THE PUBLIC |
| CFR 30(PTS1-199) : JUL 2017 | MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR |
| UL 555S:5ED 2014-02-13 | Smoke Dampers |
| CFR 33(PTS1-124) : JUL 2017 | NAVIGATION AND NAVIGABLE WATERS |
| NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
| NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
| NFPA 402 : 2013 | AIRCRAFT RESCUE AND FIRE FIGHTING OPERATIONS |
| NACE RP 02 85 : 2002 | CORROSION CONTROL OF UNDERGROUND STORAGE TANK SYSTEMS BY CATHODIC PROTECTION |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| NFPA 257 : 2017 | FIRE TEST FOR WINDOW AND GLASS BLOCK ASSEMBLIES |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
| NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| IIAR 2 : 2014 | SAFE DESIGN OF CLOSED-CIRCUIT AMMONIA REFRIGERATION SYSTEMS |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NACE RP 01 69 : 2002 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| NFPA 204 : 2015 | SMOKE AND HEAT VENTING |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ASTM E 2768 : 2011 | Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) |
| CFR 28(PTS 0-42) : JUL 2017 | JUDICIAL ADMINISTRATION - DEPARTMENT OF JUSTICE |
| ASTM D 2843 : 2016 : REDLINE | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
| UL 2245:2ED 2006-12-28 | Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks |
| NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
| UL 923:7ED 2013-05-01 | Microwave Cooking Appliances |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
| ISA 12.10.05 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| UL 2129:3ED 2017-01-05 | Halocarbon Clean Agent Fire Extinguishers |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| AWS F4.1 : 2007 | SAFE PRACTICES FOR THE PREPARATION OF CONTAINERS AND PIPING FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ASHRAE 15 : 2013 | SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| ASTM E 2336 : 2016 : REDLINE | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| CGA P 23 : 2015 | STANDARD FOR CATEGORIZING GAS MIXTURES CONTAINING FLAMMABLE AND NONFLAMMABLE COMPONENTS |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| NFPA 423:2016 | CONSTRUCTION AND PROTECTION OF AIRCRAFT ENGINE TEST FACILITIES |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| UL 147B:4ED 2016-08 | Standard for Nonrefillable (Disposable) Type Metal Container Assemblies for Butane |
| API 1621 : 2010 | BULK LIQUID STOCK CONTROL AT RETAIL OUTLETS |
| CGA V 6 : 2014 | STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS |
| CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| NFPA 1035 : 2015 | PROFESSIONAL QUALIFICATIONS FOR FIRE AND LIFE SAFETY EDUCATOR, PUBLIC INFORMATION OFFICER, YOUTH FIRESETTER INTERVENTION SPECIALIST, AND YOUTH FIRESETTER PROGRAM MANAGER |
| NFPA 1144 : 2018 | REDUCING STRUCTURE IGNITION HAZARDS FROM WILDLAND FIRE |
| NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
| NFPA 253 : 2015 | STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE |
| NFPA 418 : 2016 | HELIPORTS |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| NFPA 105 : 2016 | SMOKE DOOR ASSEMBLIES AND OTHER OPENING PROTECTIVES |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| CGA C 10 : 2013 | GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE |
| NFPA 92 : 2015 | SMOKE CONTROL SYSTEMS |
| UL 87:12ED 2016-03-24 | Standard for Power-Operated Dispensing Devices for Petroleum Products |
| ANSI A119.5 : 2009 | PARK MODEL RECREATIONAL VEHICLE STANDARD |
| AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.