NEMA TR1 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS
Published date
06-12-2012
Superseded date
17-06-2019
Superseded by
Sorry this product is not available in your region.
FOREWORD
SCOPE
PART 0 - GENERAL
PART 1 - POWER TRANSFORMERS
PART 2 - SUBSTATION AND DISTRIBUTION STEP-VOLTAGE REGULATORS
PART 3 - DISTRIBUTION TRANSFORMERS
PART 4 - SECONDARY NETWORK TRANSFORMERS
PART 5 - DRY-TYPE TRANSFORMERS
PART 6 - SUBSTATION TRANSFORMERS
PART 7 - ARC FURNACE TRANSFORMERS
PART 8 - SHUNT REACTORS
PART 9 - TERMINOLOGY
PART 10 - TEST CODE
Pertains to single phase and poly phase power and distribution transformers (including step-voltage regulators and reactors).
| DocumentType |
Standard
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy |
| MIL-DTL-28778 Revision A:2005 | Transformer, Power, Stepup, 3 Phase (No S/S Document) |
| IEEE C57.124 : 1991 | RECOMMENDED PRACTICE FOR THE DETECTION OF PARTIAL DISCHARGE AND THE MEASUREMENT OF APPARENT CHARGE IN DRY-TYPE TRANSFORMERS |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE DRAFT C57.12.20 : D10C 2004 | OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34 500 VOLTS AND BELOW; LOW VOLTAGE, 7970/13 800Y VOLTS AND BELOW |
| ASHRAE 90.4 : 2016 | ENERGY STANDARD FOR DATA CENTERS |
| IEEE C57.136 : 2000 | IEEE GUIDE FOR SOUND LEVEL ABATEMENT AND DETERMINATION FOR LIQUID-IMMERSED POWER TRANSFORMERS AND SHUNT REACTORS RATED OVER 500 KVA |
| NEMA PE 5:1997(R2003) | Utility-Type Battery Chargers |
| NEMA TP 2-2005 | STANDARD TEST METHOD FOR MEASURING THE ENERGY CONSUMPTION OF DISTRIBUTION TRANSFORMERS |
| NEMA PE 7 : 1997(R2003) | COMMUNICATIONS TYPE BATTERY CHARGERS |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE 1653.1-2016 | IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| PIP ELSTR01 : 2016 | DESIGN AND FABRICATION OF LIQUID-IMMERSED SUBSTATION POWER TRANSFORMERS, 750 KVA AND ABOVE, THREE PHASE |
| IEEE C57.12.20-2011 | TRANSFORMERS - STANDARD FOR OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34500 VOLTS AND BELOW: LOW VOLTAGE, 7970/13800Y VOLTS AND BELOW |
| IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEEE C57.12.52-2012 | IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
| IEEE C57.12.32-2002 | IEEE Standard for Submersible Equipment - Enclosure Integrity |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| IEEE C57.12.36-2007 | IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers |
| IEEE C57.19.01-2000 | IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings |
| IEEE C57.12.35-2013 REDLINE | IEEE Standard Bar Coding for Distribution Transformers and Step-Voltage Regulators |
| IEEE C57.12.24-2009 | IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below |
| IEEE C57.12.30-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEEE C57.91-2011 REDLINE | IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
| IEEE C57.96-2013 | IEEE Guide for Loading Dry-Type Distribution and Power Transformers |
| IEEE C57.12.38-2014 | IEEE Standard for Pad-Mounted-Type, Self-Cooled, Single-Phase Distribution Transformers 250 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 V and Below; Low Voltage, 480/240 V and Below |
| IEEE C57.15-2009 REDLINE | IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| NEMA ST 20:2014 | Dry Type Transformers for General Applications |
| IEEE C37.90.3-2001 | IEEE Standard Electrostatic Discharge Tests for Protective Relays |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEEE C57.12.29-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE C57.12.51-2008 | IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements |
| IEEE C37.90.2:2004 | WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS |
| IEEE C57.12.20-2011 REDLINE | IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below |
| IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C57.12.31-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
| IEEE C57.12.70-2011 | IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers |
| IEEE C57.12.23-2009 | IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below |
| IEEE C57.12.91-2011 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| IEEE C57.12.34-2015 REDLINE | IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE C57.12.50 : 1981 | REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS |
| IEEE C57.12.10-2010 REDLINE | IEEE Standard Requirements for Liquid-Immersed Power Transformers |
| IEEE C57.105-1978 | IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems |
| IEEE C57.131-2012 | IEEE Standard Requirements for Tap Changers |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.