MIL-DTL-26482 Revision H:2007
Current
Current
The latest, up-to-date edition.
Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
Available format(s)
PDF
Published date
20-02-2007
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the general requirements for two series of environment resisting, quick disconnect, miniature, circular electrical connectors (and accessories).
| DevelopmentNote |
Supersedes MIL C 26482 (G). (03/2007)
|
| DocumentType |
Standard
|
| Pages |
403
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for two series of environment
resisting, quick disconnect, miniature, circular electrical connectors (and accessories). Each series includes hermetic receptacles. The two series of connectors are intermateable when using power contacts and are not intermateable when using shielded contacts. When intermated, the minimum performance requirement for series 1 type connectors will be met.
| MIL-DTL-83528-4 Revision G:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, EMI/RFI, Connector Flange Mount |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| SAE ARP 6903 : 2017 | GUIDE FOR ACHIEVING PLATING/FINISH COMPATIBILITY WITH CONNECTORS AND ACCESSORIES USED IN ELECTRICAL WIRING INTERCONNECT SYSTEMS (EWIS) |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| EN 61076-3-114 : 2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| MS3120 Revision G:2009 | CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, WALL MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P |
| PREN 3646-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| MS3186 Revision G:2011 | CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON |
| MS3111 Revision F:2015 | Connectors, Plug, Electrical, Solder Type, Cable Connecting, Bayonet Coupling, Series 1, Classes E, F, J, and P |
| MIL-STD-2003-5 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS) |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| MS3128 Revision L:2015 | CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, WALL MOUNTING, NO. 4/6 HOLES, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P |
| MS3110 Revision F:2009 | CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER TYPE, WALL MOUNTING, BAYONET COUPLING, SERIES 1, CLASSES E, F, J AND P |
| MS3113 Revision J:2009 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, SOLDER TYPE, SOLDER MOUNTING, BAYONET COUPLING, CLASS H |
| MIL-STD-1669 Revision A:2007 | INSERT ARRANGEMENTS FOR MIL-DTL-26482 - ENVIRONMENT RESISTING, CIRCULAR, ELECTRICAL CONNECTORS |
| DSCC 89017 : D | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2 |
| MS3115 Revision G:2009 | CONNECTORS, RECEPTACLE, ELECTRICAL, DUMMY STOWAGE, BAYONET COUPLING, FOR MIL-DTL-26482 CONNECTORS, SERIES 1 AND 2 |
| MS3470 Revision E:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, NARROW FLANGE MOUNT, BAYONET COUPLING, CLASSES A, D, L, T, W AND K |
| SAE ARP 1350 : 2012 | PROCEDURE FOR INSTALLATION AND MOUNTING OF SINGLE HOLE MOUNT, CYLINDRICAL, ELECTRICAL CONNECTORS (FOR PRESSURE DIFFERENTIAL APPLICATIONS) |
| 12/30266576 DC : 0 | BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| MS3180 Revision G:2012 | Connectors, Electrical Circular, Cover, Protective Plug, MIL-DTL-26482 Series 1 and 2, Bayonet Coupling |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| MS3187 Revision F:2007 | PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS |
| MS3181 Revision G:2012 | CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, RECEPTACLE, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING |
| MS3473 Revision B:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, SOLDER MOUNTING, BAYONET COUPLING, CLASS N |
| SAE AIR 5919 : 2017 | ALTERNATIVES TO CADMIUM PLATING |
| DIN EN 3646-001:2016-03 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3646-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| MIL-DTL-22442 Revision G:2009 | CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR |
| PREN 13718-2 : DRAFT 2012 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| MS3112 Revision H:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, FLANGE, BAYONET COUPLING, SOLDER CONTACT, SERIES 1 |
| MS3122 Revision F:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1 |
| BS EN 61076-3-114:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type |
| MIL-STD-2003 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES |
| MIL-PRF-81757-17 Base Document:2009 | BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED |
| MS3479 Revision C:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, REAR MOUNTING, JAM NUT, BAYONET COUPLING, CLASS N |
| MS3442 Revision C:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, WIDE FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| SAE AIR 4004 : 2015 | GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR |
| DIN EN 13718-2:2015-05 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| UNE-EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
| MS3114 Revision M:2015 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, SOLDER TYPE, JAM NUT MOUNTING, BAYONET COUPLING, CLASSES E, F, H AND P |
| MS3121 Revision E:2015 | CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P |
| MS3126 Revision H:2015 | CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, STRAIGHT, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P |
| MS3116 Revision E:2013 | Connectors, Plug, Electrical, Solder Type, Straight, Bayonet Coupling, Series 1, Classes E, F, J and P |
| MS3472 Revision E:2009 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, WIDE FLANGE MOUNTING, BAYONET COUPLING, CLASSES A, D, L, T, W AND K |
| MS3471 Revision E:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, CABLE CONNECTING, BAYONET COUPLING, CLASSES A, D, L, T, W AND K |
| MS3185 Revision B:2013 | Mold, Plotting, and Adapter, Electrical Connector (for MIL-DTL-26482, Series 1, Class P) |
| MS3443 Revision C:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| MS3127 Revision L:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4/6 HOLES, BAYONET COUPLING, CLASS E |
| MS3477 Revision B:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, HERMETIC, SOLDERLESS, BOX MOUNTING, BAYONET COUPLING, CLASS N |
| PREN 13718-1 : DRAFT 2013 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| MIL-PRF-29595-2 Base Document:2012 | Battery, Storage, Aircraft, Maintenance-Free, 26-Volt, 50-Ampere-Hour, Lithium Rechargeable |
| MS3119 Revision E:2007 | ADAPTER, CONNECTORS, RECEPTACLE, ELECTRICAL, THRU-BULKHEAD MOUNTING, FLANGE, BAYONET COUPLING, SERIES 1 |
| MS3474 Revision J:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, CRIMP TYPE, REAR MOUNTING JAM NUT, BAYONET COUPLING, CLASSES A, D, L, T, W AND K |
| SAE AIR 6151 : 2014(R 2019) | TORQUE, THREADED APPLICATION, ELECTRICAL CONNECTOR, ACCESSORY AND TERMINAL BOARD INSTALLATION |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| IEC 61076-3-114:2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN 13718-2:2015 | Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances |
| I.S. EN 13718-2:2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| BS EN 3646-001:2015 | Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Technical specification |
| I.S. EN 13718-2:2015+A1:2020 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| EN 3646-001:2015 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
| MS3440 Revision D:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, NARROW FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2 |
| MS3475 Revision G:2015 | CONNECTORS, PLUG, ELECTRICAL, RFI SHIELDED, SERIES 2, CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND K |
| I.S. EN 61076-3-114:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
| MS3481 Revision A:2007 | TOOL, CONNECTOR ASSEMBLY, FOR MIL-DTL-26482 CONNECTORS |
| MS3449 Revision E:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 2, SINGLE HOLE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H |
| CEI EN 61076-3-114 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| MIL-HDBK-1646 Base Document:2016 | Selectionof Electrical Contacts, Connectors and Associated Servicing Tools |
| MS3124 Revision G:2011 | CONNECTORS, RECEPTACLE, ELECTRIC, CRIMP TYPE, REAR MOUNTING, JAM NUT, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P |
| MS3127 Revision L:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4/6 HOLES, BAYONET COUPLING, CLASS E |
| SAE AMS 1424 : 2016 | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
| MIL-I-81969-17 Revision B:1989 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 1, CLASS 1, COMPOSITION C |
| ASTM B 733 : 2015 : REDLINE | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
| SAE AS 39029/4 : 2012 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
| MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AIR 1351 : 2014 | MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES |
| SAE AS 39029/5 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, MIL-DTL-83733 CONNECTORS, MIL-DTL-12883/40, AND /41 RELAY SOCKETS) |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| SAE AS 39029/26B : 2013(R2018) | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482-SERIES 1 CONNECTORS) |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MS3187 Revision F:2007 | PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS |
| MIL-STD-1669 Revision A:2007 | INSERT ARRANGEMENTS FOR MIL-DTL-26482 - ENVIRONMENT RESISTING, CIRCULAR, ELECTRICAL CONNECTORS |
| SAE AS 39029/10 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-I-81969-30 Base Document:1979 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 2, CLASS 2, COMPOSITION C |
| SAE AS 39029/24 : 2013 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS) |
| MS3461 Revision A:1975 | TEST GAGE, MIL-C-0026482 SERIES 2 OR MIL-C-81703 SERIES 3 CONTACT RETENTION FEATURE |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| SAE AS 39029/7 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| SAE AS 39029/25 : 2013(R2018) | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482 SERIES 1 CONNECTORS) |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| MS3460 Revision A:1975 | TEST GAGE, MIL-C-0026482 SERIES 1 OR MIL-C-81703 SERIES 2 CONTACT RETENTION FEATURE |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MS3122 Revision F:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, CRIMP TYPE, BOX MOUNTING, FLANGE, NO. 4 HOLES, BAYONET COUPLING, SERIES 1 |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MS3119 Revision E:2007 | ADAPTER, CONNECTORS, RECEPTACLE, ELECTRICAL, THRU-BULKHEAD MOUNTING, FLANGE, BAYONET COUPLING, SERIES 1 |
| SAE AS 39029/23 : 2013 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 1 CONNECTORS) |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| MS3462 Revision B:1975 | Test Gage, MIL-C-26482 Series 2 (Class N), MIL-C-81703 Series 3 (Class N) and MIL-C-0081511 Series 3 And 4 (Class L) Contact Retention Feature |
| SAE AS 39029/9 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| SAE AS 39029/8 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 CONNECTORS) |
| MIL-I-81969-19 Revision B:1991 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 2, CLASS 1, COMPOSITION C |
| MS27488 Revision N:2008 | PLUG, END SEAL, ELECTRICAL CONNECTOR |
| MS3112 Revision H:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, FLANGE, BAYONET COUPLING, SOLDER CONTACT, SERIES 1 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.