Geometrical product specification (GPS) Masterplan

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

20-03-2019

Superseded by

ISO 14638:2015

Language(s)

English, French

Published date

30-11-1995

Publisher

International Organization for Standardization

$118.72

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Gives the overview of the international standardization of Geometrical Product Specification (GPS). Explains the concept of GPS and provides a Masterplan of GPS including the existing and futural standards.

DevelopmentNote	DRAFT ISO/DIS 14638 is also available for this standard. (07/2012)
DocumentType	Technical Report
Pages	21
PublisherName	International Organization for Standardization
Status	Withdrawn
SupersededBy	ISO 14638:2015

Standards	Relationship
UNE-CR ISO 14638:2005	Identical
NEN NPR ISO/TR 14638 : 1996	Identical
UNI ISO/TR 14638 : 2006	Identical
CR ISO 14638:1996	Identical
FD CR ISO/TR 14638 : 96 FD	Identical
DIN V 32950:1997-04	Corresponds
PNE 82323 IN	Identical

DIN EN ISO 25178-605:2014-06	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014)
I.S. EN ISO 286-2:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010)
DIN EN ISO 10579:2013-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
I.S. EN ISO 25178-3:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012)
DIN EN ISO 16610-41:2015-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
12/30258955 DC : 0	BS ISO 16610-22 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS
DIN EN ISO 16610-22:2016-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
DIN EN ISO 16610-61:2016-04	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015)
ISO/TS 17450-2:2002	Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
DIN EN ISO 16610-85:2013-05	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
DD CEN ISO/TS 15530-3:2007	Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or standards
UNE-EN ISO 10360-8:2017	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
DKD-R 4-2-1 : 2003-07	KALIBRIEREN VON MESSGERAETEN UND NORMALEN FUER DIE RAUHEITSMESSTECHNIK - BLATT 1: KALIBRIEREN VON NORMALEN FUER DIE RAUHEITSMESSTECHNIK
DIN EN ISO 16610-20:2015-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015)
UNI EN ISO 10360-8 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS
I.S. EN ISO 16610-61:2015	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015)
UNI EN ISO 12781-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
14/30272936 DC : 0	BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
BS EN ISO 2538-2:2014	Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
14/30272942 DC : 0	BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION
UNE-EN ISO 25178-2:2013	Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
ISO 199:2014	Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
DIN EN ISO 16610-21:2013-06	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
BS EN ISO 12780-1:2011	Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
BS EN ISO 12781-2:2011	Geometrical product specifications (GPS). Flatness Specification operators
BS EN ISO 25178-604:2013	Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
BS EN ISO 25178-701:2010	Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments
DD ISO/TS 16610-32:2009	Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters
I.S. EN ISO 10579:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
12/30258961 DC : 0	BS ISO 16610-40 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 40: MORPHOLOGICAL PROFILE FILTERS: BASIC CONCEPTS
DD CEN ISO/TS 12181-1:2007	Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
BS EN ISO 12780-2:2011	Geometrical product specifications (GPS). Straightness Specification operators
16/30334592 DC : 0	BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
I.S. EN ISO 16610-49:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015)
11/30243507 DC : 0	BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
I.S. EN ISO 16610-71:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
UNE-EN ISO 12781-2:2012	Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
09/30196964 DC : 0	BS EN ISO 25178-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS
09/30198186 DC : 0	BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS
BS EN ISO 10360-7:2011	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems
UNI CEN ISO/TS 14253-3 : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
PREN ISO 12780-2 : DRAFT 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
DIN EN ISO 16610-49:2015-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015)
UNI EN ISO 12780-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
DIN EN ISO 10360-7:2011-09	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
DD CEN ISO/TS 12780-2:2007	Geometrical product specifications (GPS). Straightness Specification operators
BS EN ISO 25178-605:2014	Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments
DD ISO/TS 16610-22:2006	Geometrical product specifications (GPS). Filtration Linear profile filters. Spline filters
BS EN ISO 25178-3:2012	Geometrical product specifications (GPS). Surface texture: Areal Specification operators
DIN EN ISO 17450-2:2013-04	Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
DD ENV ISO 14253-2:2001	Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DIN EN ISO 12180-1:2011-07	Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
BS ISO 10135:1994	Technical drawings. Simplified representation of moulded, cast and forged parts
DD ISO/TS 16610-41:2006	Geometrical product specifications (GPS). Filtration Morphological profile filters. Disk and horizontal line-segment filters
DIN EN ISO 12780-1:2014-04	Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
12/30262686 DC : 0	BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
DD ISO/TS 16610-30:2009	Geometrical product specifications (GPS). Filtration Robust profile filters. Basic concepts
BS EN ISO 9493:2010	Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
BS EN ISO 14253-3:2011	Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
BS EN ISO 8062-3:2007	Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
BS ISO 1101:1983	Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
08/30176932 DC : DRAFT JAN 2008	BS EN ISO 25178-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 3: SPECIFICATION OPERATORS
I.S. EN ISO 25178-70:2014	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
BS EN ISO 3611:2010	Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
DIN EN ISO 25178-701:2011-01	Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
12/30273325 DC : 0	BS ISO 16610-30 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS
I.S. EN ISO 17450-2:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
DD ISO/TS 16610-49:2006	Geometrical product specifications (GPS). Filtration Morphological profile filters. Scale space techniques
09/30198149 DC : DRAFT MAY 2009	BS EN ISO 12180-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
UNE-EN ISO 17450-2:2015	Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
DD CEN ISO/TS 14253-3:2007	Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
08/30169333 DC : DRAFT MAR 2008	BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
UNE-EN ISO 25178-602:2011	Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
ISO/TR 16015:2003	Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
I.S. EN ISO 10135:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
ISO 16610-29:2015	Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets
BS EN ISO 14978:2006	Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
DIN EN ISO 14405-2:2012-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNE-EN ISO 286-2:2011	Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
I.S. EN ISO 14405-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNE-EN ISO 14253-2:2012	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
UNI EN ISO 14253-3 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
UNI EN ISO 22432 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION
UNI EN ISO 25178-3 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS
UNE-EN ISO 14405-1:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010)
UNI EN ISO 25178-6 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
UNE-EN ISO 2538-2:2015	Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
UNI EN ISO 12180-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
UNE-EN ISO 12181-1:2012	Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
UNI EN ISO 14406 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - EXTRACTION
UNI EN ISO 10360-7 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
UNI EN ISO 17450-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
UNE-EN ISO 14405-2:2015	Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
EN ISO 14405-2:2011	Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
I.S. EN ISO 4287:1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
ISO/TS 14253-4:2010	Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules
BS EN ISO 1302:2002	Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN ISO 3274:1998	Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments
ISO 10579:2010	Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
DIN EN ISO 463 : 2009-07	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
BS EN ISO 12085 : 1998	GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
ISO 8062-1:2007	Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary
BS EN ISO 2692:2014	Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 25178-2:2012	Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters
ISO/TS 12180-1:2003	Geometrical Product Specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
UNE-EN ISO 14405-1:2012	Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
I.S. EN ISO 10360-4:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE
EN ISO 12780-2:2011	Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
BS 8888:2002	Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
CEN ISO/TS 12181-2:2007	Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003)
CEN ISO/TS 12180-2:2007	Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003)
BS 8888:2011	Technical product documentation and specification
EN ISO 12181-1:2011	Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
CEN ISO/TS 12781-2:2007	Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003)
CEN ISO/TS 12181-1:2007	Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003)
EN ISO 25178-2:2012	Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
CEN ISO/TS 12780-1:2007	Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003)
EN ISO 14253-3:2011	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
CEN ISO/TS 12781-1:2007	Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003)
EN ISO 13102:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
EN ISO 12780-1:2011	Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
CEN ISO/TS 14253-4:2010	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
I.S. EN ISO 1302:2002	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
CEN ISO/TS 12780-2:2007	Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003)
DIN SPEC 91184 E : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN EN ISO 25178-3:2012-11	Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
BS EN ISO 25378:2011	Geometrical product specifications (GPS). Characteristics and conditions. Definitions
BS EN ISO 14253-2:2011	Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
13/30273328 DC : 0	BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS
08/30181977 DC : DRAFT MAY 2008	BS EN ISO 9493 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS
09/30198152 DC : DRAFT MAY 2009	BS EN ISO 12181-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
ISO/PAS 12868:2009	Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
BS EN ISO 10135:2009	Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
BS EN ISO 16610-61:2015	Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
PD ISO/TS 17863:2013	Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
DD ISO/TS 16610-1:2006	Geometrical product specifications (GPS). Filtration Overview and basic concepts
DIN EN ISO 2538-2:2015-01	Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
I.S. EN ISO 11562:1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE : PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
UNE-EN ISO 10360-7:2012	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
BS EN ISO 13225:2012	Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
UNE-EN ISO 13385-2:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
I.S. EN ISO 10360-8:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
13/30275718 DC : 0	BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
15/30299406 DC : 0	BS EN ISO 16610-28 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS
ISO 14253-2:2011	Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
UNI EN ISO 12181-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
DIN EN ISO 5458:2016-08 (Draft)	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
12/30258949 DC : 0	BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS
12/30230676 DC : 0	BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
07/19984917 DC : 0	BS ISO 14659 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
UNI CEN ISO/TS 17450-1 : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
DIN EN ISO 8015:2011-09	Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
12/30258952 DC : 0	BS ISO 16610-20 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS
15/30299409 DC : 0	BS EN ISO 16610-31 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS
PD CEN ISO/TS 15530-1:2013	Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
PD CEN ISO/TS 8062-2:2013	Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
BS EN ISO 17450-2:2012	Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
BS EN ISO 12180-1:2011	Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
BS ISO 199:2014	Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
13/30292791 DC : 0	BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
I.S. EN ISO 16610-1:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
DIN EN ISO 10360-9:2014-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
15/30315820 DC : DRAFT JAN 2015	BS EN ISO 1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES
UNI EN ISO 2538-1 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES
DIN EN ISO 25378:2011-12	Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
12/30251864 DC : 0	BS EN ISO 16610-85 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: AREAL MORPHOLOGICAL: SEGMENTATION
ISO/TS 15530-4:2008	Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
DD CEN ISO/TS 12180-1:2007	Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
BS EN ISO 16610-29:2015	Geometrical product specifications (GPS). Filtration Linear profile filters: Spline wavelets
09/30198173 DC : DRAFT MAY 2009	BS EN ISO 15530-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORK PIECES OR STANDARDS
UNI EN ISO 8062-3 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
12/30234144 DC : 0	BS EN ISO 10360-10 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES
12/30258967 DC : 0	BS ISO 16610-49 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES
BS EN ISO 16610-40:2015	Geometrical product specifications (GPS). Filtration Morphological profile filters: Basic concepts
I.S. EN ISO 5459:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
DIN EN ISO 22432:2012-03	Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
UNI EN ISO 25178-701 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
BS EN ISO 12781-1:2011	Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
DD CEN ISO/TS 12181-2 : DRAFT 2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
14/30262683 DC : 0	BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
BS EN ISO 2538-1:2014	Geometrical product specifications (GPS). Wedges Series of angles and slopes
12/30246960 DC : 0	BS EN ISO 2538-2 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
09/30196967 DC : 0	BS EN ISO 25178-603 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS
08/30154185 DC : DRAFT MAY 2008
BS EN ISO 286-2:2010	Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 10135 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
07/30174208 DC : 0	BS ISO/DIS 25178-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
09/30198158 DC : 0	BS EN ISO 12780-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
EN ISO 2692:2014	Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
DD CEN ISO/TS 12781-2:2007	Geometrical product specifications (GPS). Flatness Specification operators
UNI EN ISO 25178-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
DIN EN ISO 12781-1:2011-07	Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
S.R. CEN ISO TS 12181-2:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
UNE-EN ISO 286-1:2011	Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
UNE-EN ISO 2538-1:2015	Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
UNE-EN ISO 12180-2:2012	Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
UNE-EN ISO 12181-2:2012	Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
I.S. EN ISO 12181-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN ISO 16610-29:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015)
BS EN ISO 14405-2:2011	Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
I.S. EN ISO 25378:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS
I.S. EN ISO 13385-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 8062-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
I.S. CEN ISO TS 15530-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR STANDARDS
I.S. EN ISO 25178-6:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
ISO/TS 16610-30:2009	Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts
BS EN ISO 5458:1999	Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
UNI EN ISO 25378 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS
DIN EN ISO 15530-3:2012-01	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
I.S. EN ISO 10360-7:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS
ISO/TS 16610-49:2006	Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques
UNE-EN ISO 25178-6:2010	Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
UNE-EN ISO 12180-1:2012	Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
ISO/TS 17450-1:2005	Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification
UNI EN ISO 13102 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS
UNI EN ISO 14978 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
DIN EN ISO 14253-1:2013-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013)
ISO 492:2014	Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
I.S. EN ISO 12085:1998	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
EN ISO 16610-61:2015	Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
DIN EN ISO 10360-6:2009-01	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
DIN EN ISO 10360-5:2011-01	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
DIN EN ISO 8785:1999-10	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS
UNE-EN ISO 2692:2015	Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ISO 8062-3:2007	Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 25178-70:2014	Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
ISO 13225:2012	Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
EN ISO 10360-5:2010	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
BS EN ISO 5436-2:2012	Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards
BS EN ISO 4287 : 2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
BS EN ISO 10360-2:2009	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions
I.S. EN ISO 10360-2:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
I.S. EN ISO 1119:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
I.S. EN ISO 14660-1:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
DIN ISO 16792:2008-12	TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
I.S. EN ISO 2692:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
I.S. EN ISO 5436-2:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
ASME B89.4.10360.2 : 2008	ACCEPTANCE TEST AND REVERIFICATION TEST FOR COORDINATE MEASURING MACHINES (CMMS) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
VDI 3414 Blatt 2:2014-02 (Draft)	Quality evaluation of wooden surfaces - Testing and measuring methods
VDI 3414 Blatt 3:2014-02 (Draft)	Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces.
VDI 3414 Blatt 1:2014-02 (Draft)	Quality evaluation of wooden surfaces - Surface characteristics
DIN EN ISO 25178-601:2011-01	Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
08/30188936 DC : 0	BS EN ISO 16610-21 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS - GAUSSIAN FILTERS
I.S. EN ISO 12180-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
12/30262692 DC : 0	BS ISO 16610-61 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS
DIN EN ISO 13225:2012-08	Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
EN ISO 5458:1998	Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998)
UNI EN ISO 17450-1 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
UNI EN ISO 25178-604 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS
07/30170832 DC : DRAFT AUG 2007	BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
BS EN ISO 25178-2:2012	Geometrical product specifications (GPS). Surface texture. Areal Terms, definitions and surface texture parameters
PD ISO/TR 10064-6:2009	Code of inspection practice Bevel gear measurement methods
12/30268851 DC	BS EN 9300-120. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. CAD 3D explicit geometry with product and manufacturing information
11/30234091 DC : DRAFT JULY 2011	BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
DD ISO/TS 15530-4:2008	Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation
DD ISO/TS 17450-1 : 2005	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
BS EN ISO 12181-1:2011	Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
BS EN ISO 10360-8:2013	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
BS EN ISO 15530-3:2011	Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards
I.S. EN ISO 3611:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
UNE-EN ISO 25178-3:2013	Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
DD CEN ISO/TS 12781-1:2007	Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
DD ISO/TS 16610-20:2006	Geometrical product specifications (GPS). Filtration Linear profile filters. Basic concepts
I.S. EN ISO 25178-604:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
BS EN ISO 25178-606:2015	Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
DIN EN ISO 14406:2011-04	Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
BS EN ISO 10579:2013	Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
UNI EN ISO 25178-601 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
DIN EN ISO 12180-2:2011-07	Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
BS EN ISO 25178-602:2010	Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN ISO 25178-603:2013	Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
UNI EN ISO 25178-605 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS
UNI EN ISO 2538-2 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
BS EN ISO 16610-71:2014	Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
DIN EN ISO 8062-3:2008-09	Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
09/30198146 DC : DRAFT MAY 2009	BS EN ISO 12180-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
DIN EN ISO 25178-70:2014-06	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
UNI EN ISO 12780-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
12/30258958 DC : 0	BS ISO 16610-29 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS
DD ISO/TS 16610-31:2010	Geometrical product specifications (GPS). Filtration Robust profile filters. Gaussian regression filters
UNI EN ISO 15530-3 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS
ISO/TS 16610-29:2006	Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets
DD CEN ISO/TS 12180-2:2007	Geometrical product specifications (GPS). Cylindricity Specification operators
I.S. EN ISO 16610-21:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
09/30198179 DC : 0	BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
DIN EN ISO 2538-1:2015-01	GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014)
UNI EN ISO 25178-602 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
BS EN ISO 8062-1:2007	Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Vocabulary
12/30251867 DC : 0	BS EN ISO 16610-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
DD CEN ISO/TS 12780-1:2007	Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
BS EN ISO 13102:2012	Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
09/30198155 DC : DRAFT MAY 2009	BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
BS EN ISO 10360-9:2013	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems
08/30187511 DC : DRAFT AUG 2008	BS EN ISO 14406 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DATA EXTRACTION
UNE-EN ISO 17450-1:2015	Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
09/30198176 DC : 0	BS EN ISO 17450-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
UNI EN ISO 3611 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
UNI EN ISO 286-1 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
UNI EN ISO 16610-71 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
BS EN ISO 25178-70:2014	Geometrical product specification (GPS). Surface texture: Areal Material measures
UNE-EN ISO 14406:2012	Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
DIN EN ISO 25178-603:2014-02	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
UNI EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
S.R. CEN ISO/TS 8062-2:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
I.S. EN ISO 16610-85:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
ISO 286-2:2010	Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 25178-70 : 2014	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
UNE-EN ISO 8015:2012	Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
I.S. EN ISO 12781-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN ISO 14978:2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
UNE-EN ISO 9493:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
ISO 286-1:2010	Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
UNI EN ISO 13225 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
UNI EN ISO 10579 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
UNI EN ISO 5459 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
I.S. EN ISO 12781-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
ISO/TS 17863:2013	Geometrical product specification (GPS) Tolerancing of moveable assemblies
S.R. CEN ISO TS 12180-2:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
S.R. CEN ISO TS 14253-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
S.R. CEN ISO TS 12781-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
DIN EN ISO 10360-2:2010-06	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
DIN EN ISO 2692:2015-12	Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
DIN EN ISO 4288:1998-04	GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
DIN EN ISO 14978:2006-09	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
DIN EN ISO 13565-1:1998-04	Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997
DIN EN ISO 4287:2010-07	Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009)
ISO 10135:2007	Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
ISO 463:2006	Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
BS EN ISO 14660-2:2000	Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
ISO/TS 12781-2:2003	Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators
BS EN ISO 10360-3:2001	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of the rotary table as the fourth axis
ISO 1302:2002	Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
ISO 10360-6:2001	Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
BS EN ISO 8785:1999	Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
ISO/TS 15530-1:2013	Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics
I.S. EN ISO 13385-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
EN ISO 13385-2:2011	Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN ISO 10360-5:2012	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)
UNI EN ISO 10360-5 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
EN ISO 14660-1:1999	Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999)
EN ISO 25178-6:2010	Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
PREN ISO 25178-7 : DRAFT 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS
UNI EN ISO 463 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
UNI EN ISO 1119 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES
UNI EN ISO 10360-6 : 2005	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
EN ISO 25178-605:2014	Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014)
UNI EN ISO 5436-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS
I.S. EN ISO 10360-1:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY
UNI EN ISO 10360-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS
UNI EN ISO 4287 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
UNE-EN ISO 12780-2:2012	Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
DIN EN ISO 12781-2:2011-07	Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
DIN EN ISO 10135:2010-02	Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
I.S. CEN ISO TS 12780-2:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
UNI EN ISO 8062-1 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
BS EN ISO 286-1:2010	Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
09/30198167 DC : DRAFT MAY 2009	BS EN ISO 12781-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
08/30180227 DC : DRAFT MAR 2008	BS EN ISO 3611 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
10/30213495 DC : 0	BS ISO 10360-9 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS
BS EN ISO 12181-2:2011	Geometrical product specifications (GPS). Roundness Specification operators
I.S. EN ISO 25178-605:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014)
DIN EN ISO 13102:2012-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
UNI CEN ISO/TS 15530-1 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS
13/30251855 DC : 0	BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS
DIN EN ISO 13385-1:2011-12	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011)
I.S. EN ISO 25178-701:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
UNI ISO/TS 15530-4 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION
UNI EN ISO 16610-21 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS
UNI EN ISO 10360-9 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS
DD CEN ISO/TS 17450-1 : DRAFT 2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
UNI EN ISO 12180-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
DIN EN ISO 12780-2:2011-07	Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
DD ISO/TS 16610-29:2006	Geometrical product specifications (GPS). Filtration Linear profile filters. Spline wavelets
UNI CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
14/30257552 DC : 0	BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
BS EN ISO 16610-21:2012	Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
I.S. EN ISO 2538:2003	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF ANGLES AND SLOPES ON PRISMS
BS EN ISO 16610-41:2015	Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
UNE-EN ISO 16610-21:2013	Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
BS EN ISO 8015:2011	Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
13/30213519 DC : 0	BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE
I.S. EN ISO 9493:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS
UNE-EN ISO 12781-1:2012	Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
07/30154358 DC : DRAFT AUG 2007	DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
BS EN ISO 22432:2011	Geometrical product specifications (GPS). Features utilized in specification and verification
BS EN ISO 16610-85:2013	Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
11/30205376 DC : 0	BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS
UNI EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
DIN EN ISO 25178-2:2012-09	Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
12/30262689 DC : 0	BS ISO 16610-60 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 60: LINEAR AREAL FILTERS - BASIC CONCEPTS
BS EN ISO 16610-49:2015	Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques
ISO/TS 16610-22:2006	Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters
12/30258964 DC : 0	BS ISO 16610-41 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS
DD CEN ISO/TS 14253-4:2010	Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Background on functional limits and specification limits in decision rules
DD ISO/PAS 12868:2009	Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems
DD ISO/TS 17450-2:2002	Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties
15/30272939 DC : 0	BS EN ISO 25178-72 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 72: XML FILE FORMAT X3P
09/30198170 DC : DRAFT MAY 2009	BS EN ISO 14253-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORK PIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
BS ISO 492:2014	Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
PD ISO/TR 23605:2009	Technical product specification (TPS). Application guidance. International model for national implementation
09/30198161 DC : 0	BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
ISO/TS 16610-1:2006	Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts
96/704403 DC : 0	ISO/DIS 9493 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS
08/30184522 DC : DRAFT JUNE 2008	BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
UNE-EN ISO 12780-1:2012	Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
09/30198164 DC : DRAFT MAY 2009	BS EN ISO 12781-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
I.S. EN ISO 12780-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
I.S. EN ISO 2538-2:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
I.S. EN ISO 10360-9:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
ISO/TS 16610-28:2010	Geometrical product specifications (GPS) Filtration Part 28: Profile filters: End effects
DIN EN ISO 12181-1:2011-07	Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
DIN EN ISO 16610-71:2014-12	Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
I.S. EN ISO 25178-2:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS (ISO 25178-2:2012)
UNI EN ISO 12781-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
UNE-EN ISO 13225:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
ISO 15530-3:2011	Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
UNE-EN ISO 10579:2015	Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
UNE-EN ISO 25178-601:2011	Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
I.S. EN ISO 14253-3:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
ISO/TR 10064-6:2009	Code of inspection practice Part 6: Bevel gear measurement methods
ISO 14978:2006	Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
ISO/TS 16610-20:2006	Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts
UNI EN ISO 13385-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 16610-40:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 40: MORPHOLOGICAL PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-40:2015)
I.S. EN ISO 17450-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011)
I.S. EN ISO 8062-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
I.S. EN ISO 2538-1:2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014)
DIN EN ISO 286-2:2010-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO/TS 16610-40:2006	Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts
DIN EN ISO 14253-2:2011-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011)
I.S. EN ISO 25178-603:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
EN ISO 15530-3:2011	Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
UNI EN ISO 14253-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
ISO 14405-2:2011	Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
EN ISO 16610-29:2015	Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO 16610-29:2015)
PREN ISO 2692 : DRAFT 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
UNE-EN ISO 3611:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
S.R. CEN ISO TS 12180-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
I.S. EN ISO 12780-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN ISO 14253-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
I.S. EN ISO 12180-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
I.S. EN ISO 14406:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - EXTRACTION
ISO/TS 12181-2:2003	Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators
ISO 22432:2011	Geometrical product specifications (GPS) — Features utilized in specification and verification
ISO 16610-1:2015	Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
ISO 25178-603:2013	Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
ISO 16610-21:2011	Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
ISO 5436-2:2012	Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
BS EN ISO 13565-2:1998	Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve
ISO 1119:2011	Geometrical product specifications (GPS) — Series of conical tapers and taper angles
ISO 16610-20:2015	Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts
ISO 25178-605:2014	Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments
ISO 10360-9:2013	Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems
ISO 9493:2010	Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics
ISO 2692:2014	Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 12781-2:2011	Geometrical product specifications (GPS) Flatness Part 2: Specification operators
BS EN ISO 2538:2003	Geometrical product specifications (GPS). Series of angles and slopes on prisms
ISO 25378:2011	Geometrical product specifications (GPS) Characteristics and conditions Definitions
ISO 25178-3:2012	Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
ISO 16610-40:2015	Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts
ISO 10360-5:2010	Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems
ISO 17450-2:2012	Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 2538-1:2014	Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes
BS EN ISO 10360-6:2001	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
ISO 14253-3:2011	Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 13565-3:1998	Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve
ISO 10360-4:2000	Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode
BS EN ISO 463:2006	Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
ISO/TS 12781-1:2003	Geometrical Product Specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
ISO/TS 12181-1:2003	Geometrical Product Specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
ISO 16610-22:2015	Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
ISO 3611:2010	Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics
ISO 5459:2011	Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO 25178-604:2013	Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO 13385-1:2011	Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics
ISO/TS 14253-2:1999	Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 12180-1:2011	Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
ISO 13102:2012	Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics
BS EN ISO 13565-1:1998	Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
ISO 14660-2:1999	Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature
ISO/TS 12780-2:2003	Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators
ISO 8785:1998	Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
ISO 8015:2011	Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 12181-1:2011	Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
ISO 17450-1:2011	Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
BS EN ISO 10360-5:2010	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus contacting probing systems
UNE-EN ISO 13385-1:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
BS EN ISO 14660-1:2000	Geometrical product specifications (GPS). Geometrical features General terms and definitions
ISO 10360-1:2000	Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary
ISO/TS 15530-3:2004	Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards
ISO/TS 12180-2:2003	Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators
ISO 10360-3:2000	Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis
ISO 13385-2:2011	Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 5436-1:2000	Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures
ISO 16610-49:2015	Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques
ISO 16610-85:2013	Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
ISO 25178-6:2010	Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture
ISO 2538-2:2014	Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
BS EN ISO 3650:1999	Geometrical product specifications (GPS). Length standards. Gauge blocks
ISO 3274:1996	Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
ISO 2538:1998	Geometrical Product Specifications (GPS) Series of angles and slopes on prisms
UNE-EN ISO 10360-2:2010	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
I.S. EN ISO 10360-5:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS
ISO 16610-41:2015	Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
ISO/TS 12780-1:2003	Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
ISO 25178-602:2010	Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 14660-1:1999	Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions
ISO 16610-71:2014	Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
ISO 12780-1:2011	Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
BS EN ISO 10360-1:2001	Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary
ISO 25178-606:2015	Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO 12179:2000	Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
ISO 4287:1997	Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 10360-7:2011	Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems
DIN EN ISO 16610-29:2016-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015)
DIN EN ISO 2538:2003-05	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF ANGLES AND SLOPES ON PRISMS
BS 8888:2004	Technical product specification (TPS). Specification
EN ISO 16610-1:2015	Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
EN ISO 25178-606:2015	Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
EN ISO 5436-2:2012	Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
I.S. EN ISO 12179:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN ISO 10360-7:2011	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
I.S. EN ISO 13565-2:1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
EN ISO 16610-49:2015	Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
EN ISO 8062-1:2007	Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
EN ISO 5459:2011	Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
EN ISO 16610-85:2013	Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
EN ISO 10360-2:2009	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009)
EN ISO 25178-602:2010	Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
EN ISO 25178-701:2010	Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN ISO 3274:1997	Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)
EN ISO 25178-3:2012	Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
EN ISO 5436-1:2000	Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000)
EN ISO 2538:2003	Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998)
EN ISO 13385-1:2011	Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
EN ISO 9493:2010	Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010)
EN ISO 3650:1998	Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998)
EN ISO 8015:2011	Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN ISO 16610-21:2012	Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
EN ISO 8785:1999	Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)
EN ISO 25378:2011	Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
EN ISO 25178-70:2014	Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)
EN ISO 10579:2013	Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
EN ISO 10360-3:2000	Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)
EN ISO 16610-22:2015	Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)
EN ISO 16610-40:2015	Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015)
EN ISO 3611:2010	Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
EN ISO 16610-41:2015	Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
EN ISO 1119:2011	Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
EN ISO 14406:2010	Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
EN ISO 2538-1:2014	Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
EN ISO 13225:2012	Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
EN ISO 25178-601:2010	Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
EN ISO 22432:2011	Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
EN ISO 8062-3 : 2007 COR 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 17450-2:2012	Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
EN ISO 10360-9:2013	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
EN ISO 14660-2:1999	Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999)
EN ISO 16610-20:2015	Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015)
EN ISO 25178-603:2013	Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
EN ISO 13565-1:1997	Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996)
EN ISO 2538-2:2014	Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
EN ISO 10360-8:2013	Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
EN ISO 10135:2009	Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
EN ISO 25178-604:2013	Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
I.S. EN ISO 4288:1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
I.S. EN ISO 13565-3:2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
EN ISO 16610-71:2014	Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
BS EN ISO 13385-2:2011	Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics
UNE-EN ISO 14253-1:2015	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013)
I.S. EN ISO 286-1:2010/AC:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010)
UNE-EN ISO 13102:2013	Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
PREN ISO 12780-1 : DRAFT 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
UNI EN ISO 12181-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
DIN EN ISO 25178-604:2013-12	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
DD ISO/TS 16610-28:2010	Geometrical product specifications (GPS). Filtration Profile filters. End effects
I.S. EN ISO 16610-22:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
DIN EN ISO 14253-3:2011-10	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
BS EN ISO 16610-22:2015	Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters
ISO/TR 16570:2004	Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii
DIN EN ISO 25178-602:2011-01	Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
BS EN ISO 17450-1:2011	Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
BS EN ISO 12180-2:2011	Geometrical product specifications (GPS). Cylindricity Specification operators
DIN EN ISO 12181-2:2011-07	Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
BS EN ISO 16610-20:2015	Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts
ISO/TS 16610-41:2006	Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters
I.S. EN ISO 13102:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
11/30231340 DC : 0	BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
07/30154336 DC : 0	BS ISO 25378 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SPECIFICATION - CHARACTERISTICS AND CONDITIONS
13/30272933 DC : 0	BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES
DD ISO/TS 16610-40:2006	Geometrical product specifications (GPS). Filtration Morphological profile filters. Basic concepts
DIN EN ISO 25178-6:2010-06	Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
ENV ISO 14253-2:2001	Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999)
BS EN ISO 16610-1:2015	Geometrical product specifications (GPS). Filtration Overview and basic concepts
I.S. EN ISO 13225:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012)
07/30170829 DC : DRAFT AUG 2007	BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS ISO 10579 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
14/30299349 DC : 0	BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
DIN EN ISO 17450-1:2012-04	Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
BS EN ISO 14406:2010	Geometrical product specifications (GPS). Extraction
08/30171709 DC : DRAFT JAN 2008	BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
BS EN ISO 5459:2011	Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
12/30246945 DC : 0	BS EN ISO 2538-1 - GEOMETRICAL PRODUCT SPECIFICATIONS - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES
UNI EN ISO 8015 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
10/30200334 DC : 0	BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
DIN EN ISO 13385-2:2013-06	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011)
10/30209612 DC : 0	BS ISO 1119 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
96/704406 DC : 0	ISO/DIS 463 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL GAUGES - DESIGN AND METROLOGICAL REQUIREMENTS
DIN EN ISO 10360-8:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
DIN EN ISO 16610-1:2015-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
DD ISO/TS 23165:2006	Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
I.S. EN ISO 16610-41:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
ISO 3650:1998	Geometrical Product Specifications (GPS) Length standards Gauge blocks
04/30125936 DC : DRAFT NOV 2004	ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
BS EN ISO 25178-6:2010	Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture
13/30251870 DC : 0	BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS
BIP 3016 : 2004	BS 8888(2004) - TECHNICAL PRODUCT SPECIFICATION CD-ROM
BS EN ISO 25178-601:2010	Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments
I.S. EN ISO 15530-3:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
S.R. CEN ISO TS 12780-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
BS ISO 3040 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES
PREN ISO 1119 : DRAFT 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES
S.R. CEN ISO TS 14253-4:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES
BS EN ISO 13385-1:2011	Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics
I.S. EN ISO 22432:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION (ISO 22432:2011)
I.S. EN ISO 5458:1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
UNI EN ISO 9493 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS
ISO/TS 16610-32:2009	Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
I.S. EN ISO 25178-606:2015	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015)
I.S. EN ISO 16610-20:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015)
UNI CEN ISO/TS 14253-4 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES
UNI EN ISO 13385-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 12181-1:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
S.R. CEN ISO/TS 15530-1:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013)
I.S. EN ISO 8015:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
UNE-EN ISO 25178-701:2011	Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
UNI EN ISO 25178-603 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS
UNI EN ISO 16610-85 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION
UNI ISO 129-1 : 2011	TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
ISO 16610-61:2015	Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters
S.R. CEN ISO TS 12781-2:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
I.S. CEN ISO TS 17450-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005)
I.S. EN ISO 25178-601:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
I.S. EN ISO 25178-602:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
ISO/TS 16610-31:2010	Geometrical product specifications (GPS) Filtration Part 31: Robust profile filters: Gaussian regression filters
CEN ISO/TS 8062-2 : 2013 COR 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
DIN EN ISO 1119:2012-04	Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
DIN EN ISO 3274:1998-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
ISO 12181-2:2011	Geometrical product specifications (GPS) Roundness Part 2: Specification operators
ISO 25178-601:2010	Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
ISO/TS 14253-3:2002	Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 14406:2010	Geometrical product specifications (GPS) — Extraction
UNE-EN ISO 1119:2012	Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
ISO 10360-2:2009	Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions
ISO 10360-8:2013	Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors
ISO 25178-701:2010	Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 11562 : 1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS
BS EN ISO 12179:2001	Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
ISO/TS 8062-2:2013	Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
ISO 12180-2:2011	Geometrical product specifications (GPS) Cylindricity Part 2: Specification operators
BS EN ISO 1119:2011	Geometrical product specifications (GPS). Series of conical tapers and taper angles
ISO 12780-2:2011	Geometrical product specifications (GPS) Straightness Part 2: Specification operators
ISO 12781-1:2011	Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
DIN EN ISO 463:2006-06	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES
EN ISO 4288:1997	Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
EN ISO 12180-2:2011	Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
BS 8888:2017	Technical product documentation and specification
EN ISO 12180-1:2011	Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
CEN ISO/TS 15530-3:2007	Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004)
EN ISO 17450-1:2011	Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
DIN EN ISO 3611:2011-03	Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010)
EN ISO 13565-3:2000	Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998)
EN ISO 12781-1:2011	Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
DIN EN ISO 5436-2:2013-04	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
CEN ISO/TS 12180-1:2007	Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/TS 12180-1:2003)
CEN ISO/TS 14253-3:2007	Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002)
EN ISO 12781-2:2011	Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
CEN ISO/TS 15530-1:2013	Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
EN ISO 12181-2:2011	Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
BS 8888:2013	Technical product documentation and specification
EN ISO 1302:2002	Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
EN ISO 13565-2:1997	Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996)
DKD-R 4-2-3 : 2011	Calibration of instruments and standards for roughness metrology Sheet 3 Calibration of standards with periodic profiles in horizontal direction by means of stylus instruments

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

ISO/TR 14638:1995

Geometrical product specification (GPS) Masterplan

Shopping Cart

ISO/TR 14638:1995

Geometrical product specification (GPS) Masterplan

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Category

Subcategory