ISO/IEC 17011:2004
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
30-11-2018
Superseded by
Language(s)
English, French
Published date
07-09-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/IEC 17011:2004 specifies general requirements for accreditation bodies assessing and accrediting conformity assessment bodies (CABs). It is also appropriate as a requirements document for the peer evaluation process for mutual recognition arrangements between accreditation bodies.
Accreditation bodies operating in accordance with ISO/IEC 17011:2004 do not have to offer accreditation to all types of CABs.
For the purposes of ISO/IEC 17011:2004, CABs are organizations providing the following conformity assessment services: testing, inspection, management system certification, personnel certification, product certification and, in the context of this document, calibration.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| AS ISO/IEC 17011-2005 | Identical |
| SS-EN ISO/IEC 17011 : 2005 | Identical |
| BS EN ISO/IEC 17011:2004 | Identical |
| OVE/ONORM EN ISO/IEC 17011 : 2018 | Identical |
| SN EN ISO/IEC 17011 : 2018 | Identical |
| UNE-EN ISO/IEC 17011:2004 | Identical |
| BS EN ISO/IEC 17011:2017 | Identical |
| UNI CEI EN ISO/IEC 17011 : 2005 | Identical |
| GOST R ISO/IEC 17011 : 2008 | Identical |
| NF EN ISO/IEC 17011 : 2017 | Identical |
| UNE-EN ISO/IEC 17011:2017 | Identical |
| NEN EN ISO/IEC 17011 : 2018 | Identical |
| NS EN ISO/IEC 17011 : 2017 | Identical |
| BIS IS/ISO/IEC 17011 : 2004 | Identical |
| NBN EN ISO/IEC 17011 : 2004 | Identical |
| CEI UNI EN ISO/IEC 17011 : 2008 | Identical |
| DIN EN ISO/IEC 17011:2016-09 (Draft) | Identical |
| I.S. EN ISO/IEC 17011:2017 | Identical |
| GOST ISO/IEC 17011 : 2009 | Identical |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 03/307701 DC : DRAFT JUNE 2003 | ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 14/30272915 DC : 0 | BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE |
| 10/30206406 DC : 0 | BS EN 16214-2 - SUSTAINABLY PRODUCED BIOMASS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS FOR BIOFUELS AND BIOLIQUIDS - PART 2: CONFORMITY ASSESSMENT, INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
| NFPA 1851 : 2014 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| BS EN 9104-003:2010 | Aerospace series. Quality management systems Requirements for aerospace quality management system (AQMS) auditor training and qualification |
| UNI CEI 70016 : 2008 | CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE |
| PD ISO/IEC TR 20000-5:2013 | Information technology. Service management Exemplar implementation plan for ISO/IEC 20000-1 |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| PD ISO/IEC TR 20000-3:2009 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| 14/30229005 DC : 0 | BS ISO/IEC 29169 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - THE APPLICATION OF CONFORMITY ASSESSMENT METHODOLOGY TO THE ASSESSMENT TO PROCESS QUALITY CHARACTERISTICS AND ORGANIZATIONAL MATURITY |
| 13/30283149 DC : 0 | BS EN 9104-002 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEMREGISTRATION/CERTIFICATION PROGRAMS |
| ASTM D 7495 : 2012 | Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| CEI UNI 70019 : 2008 | CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| UNI CEN/TS 16214-2 : 2014 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 2: CONFORMITY ASSESSMENT INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
| UNE-EN 9104-002:2017 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| I.S. EN ISO 9094:2017 | SMALL CRAFT - FIRE PROTECTION (ISO 9094:2015) |
| ISEA 125 : 2014 | CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS EN ISO 9094:2017 | Small craft. Fire protection |
| I.S. EN 9104-002:2016 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| NFPA 1801 : 2018 | THERMAL IMAGERS FOR THE FIRE SERVICE |
| NFPA 1953 : 2016 | PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| NFPA 1982 : 2018 | Standard on Personal Alert Safety Systems (PASS) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 6508-3:2015-06 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| ECA ILAC G3 : 2012 | GUIDELINES FOR TRAINING COURSES FOR ASSESSORS USED BY ACCREDITATION BODIES |
| UNI CEI 70019 : 2008 | CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| CSA PLUS 15189 : 2010 | THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| NFPA 1936 : 2015 | POWERED RESCUE TOOLS |
| ISO/IEC TR 20000-3:2009 | Information technology — Service management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| S.R. CLC/TR 50619:2014 | GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS |
| BS ISO 14624-3:2005 | Space systems. Safety and compatibility of materials Determination of offgassed products from materials and assembled articles |
| BS EN ISO/IEC 17040:2005 | Conformity assessment. General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| 12/30244420 DC | BS ISO 13304. Radiological protection. Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 11/30219220 DC : 0 | BS ISO 18436-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 1: REQUIREMENTS FOR ASSESSMENT BODIES AND THE ASSESSMENT PROCESS |
| BS ISO 18400-106:2017 | Soil quality. Sampling Quality control and quality assurance |
| INCITS/ISO/IEC 24709-1 : 2009 | INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 1: METHODS AND PROCEDURES |
| ISO 9094:2015 | Small craft — Fire protection |
| SAE AS 9104/2A : 2014 | REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| CEI UNI EN ISO/IEC 17040 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| BS ISO/IEC 20000-3:2012 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| I.S. EN 9104-003:2010 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| ISO/IEC 20000-6:2017 | Information technology — Service management — Part 6: Requirements for bodies providing audit and certification of service management systems |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| DIN EN ISO/IEC 17000:2005-03 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| S.R. CEN/TS 16214-2:2014 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 2: CONFORMITY ASSESSMENT INCLUDING CHAIN OF CUSTODY AND MASS BALANCE |
| I.S. EN 61375-2-3:2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| ISO 13304-1:2013 | Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles |
| UNE-EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| ASTM E 2708 : 2017-03 | TERMINOLOGY FOR ACCREDITATION AND CERTIFICATION |
| CEI UNI EN ISO/IEC 17000 : 2011 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| S.R. CLC/TR 50674:2018 | GUIDELINES FOR THE VERIFICATION OF HOUSEHOLD APPLIANCES UNDER ENERGY LABELLING AND ECO DESIGN |
| I.S. EN ISO/IEC 17040:2005 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES AND ACCREDITATION BODIES |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| UNE-EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| UNE-EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| I.S. EN ISO 6508-2:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
| I.S. EN ISO 6508-3:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| PD CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Conformity assessment including chain of custody and mass balance |
| DIN ISO 18436-1:2013-05 | Condition monitoring and diagnostics of machines - Requirements for qualification and assessment of personnel - Part 1: Requirements for assessment bodies and the assessment process (ISO 18436-1:2012) |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| BS EN ISO/IEC 17000:2004 | Conformity assessment. Vocabulary and general principles |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNE-ISO/IEC 20000-3:2015 | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| PD CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| 12/30257208 DC : DRAFT FEB 2012 | BS ISO/IEC 20000-3 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| ACI 355.2 : 2007 | QUALIFICATION OF POST-INSTALLED MECHANICAL ANCHORS IN CONCRETE AND COMMENTARY |
| 06/30150260 DC : 0 | EN 9104-3 - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - PART 3: AUDITOR TRAINING AND QUALIFICATION |
| PD CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| DD ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Certification and accreditation requirements |
| ACI 355.4 : 2011 | QUALIFICATION OF POST-INSTALLED ADHESIVE ANCHORS IN CONCRETE AND COMMENTARY |
| BS ISO/IEC 20000-6:2017 | Information technology. Service management Requirements for bodies providing audit and certification of service management systems |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| ISO/IEC 29169:2016 | Information technology Process assessment Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity |
| PREN 9104-002 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| SAE AS 6810 : 2018 | REQUIREMENTS FOR ACCREDITATION BODIES WHEN ACCREDITING TEST LABORATORIES PERFORMING DETECTION OF SUSPECT/COUNTERFEIT IN ACCORDANCE WITH AS6171 GENERAL REQUIREMENTS AND THE ASSOCIATED TEST METHODS |
| BS EN 9104-001:2013 | Aerospace series. Quality management systems Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| ISO 18400-106:2017 | Soil quality — Sampling — Part 106: Quality control and quality assurance |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| ISO/IEC 24709-1:2017 | Information technology — Conformance testing for the biometric application programming interface (BioAPI) — Part 1: Methods and procedures |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| CEN/TS 16214-2:2014 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| EN ISO/IEC 17040:2005 | Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO/IEC 17000:2004 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| ECA ILAC P9 : 2014 | ILAC POLICY FOR PARTICIPATION IN PROFICIENCY TESTING ACTIVITIES |
| DIN EN ISO 9094:2016-05 | Small craft - Fire protection (ISO 9094:2015) |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNI CEI ISO/IEC TR 20000-3 : 2010 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| UNI EN 9104-003 : 2011 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| 11/30247214 DC : 0 | BS EN 9104-001 - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| ISO 18436-1:2012 | Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 1: Requirements for assessment bodies and the assessment process |
| ISO/IEC TR 17028:2017 | Conformity assessment Guidelines and examples of a certification scheme for services |
| 13/30264465 DC : 0 | BS EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ECA ILAC P15 : 2016 | APPLICATION OF ISO/IEC 17020:2012 FOR THE ACCREDITATION OF INSPECTION BODIES |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| 13/30264459 DC : 0 | BS EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| CEI UNI ISO/IEC TR 20000-3 : 2011 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| EN 61375-2-3:2015/A11:2017 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE (IEC 61375-2-3:2015) |
| BS ISO/IEC 29169:2016 | Information technology. Process assessment. Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| DD ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| NFPA 1971:2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| BS ISO 18436-1:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Requirements for assessment bodies and the assessment process |
| BS ISO/IEC 24709-1:2017 | Information technology. Conformance testing for the biometric application programming interface (BioAPI) Methods and procedures |
| BS EN 61375-2-3 : 2015 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-3: TCN COMMUNICATION PROFILE (IEC 61375-2-3:2015) |
| UNI CEI EN ISO/IEC 17000 : 2005 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| 04/30108568 DC : 0 | ISO/IEC GUIDE 60 - CODE OF GOOD PRACTICE FOR CONFORMITY ASSESSMENT |
| 17/30346185 DC : 0 | BS EN ISO 34101-4 - SUSTAINABLE AND TRACEABLE COCOA BEANS - PART 4: REQUIREMENTS FOR CERTIFICATION SCHEMES |
| ISO 14624-3:2005 | Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| CSA ISO/IEC TR 20000-5 : 2015 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 5: EXEMPLAR IMPLEMENTATION PLAN FOR ISO/IEC 20000-1 |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| UNE-EN 9104-001:2013 | Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ASTM C 1077 : 2017 : REDLINE | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| BS EN 9104-002:2016 | Aerospace series. Quality management systems Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| UNE-ISO/IEC TR 20000-3:2011 IN | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| SAE AS 9014 : 2015 | AMERICAS AEROSPACE QUALITY GROUP (AAQG) REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| ASTM F 2962 : 2013 | Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2019) |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| IEC TR 62970:2016 | Guidance on how to conduct round robin tests for household and similar electrical appliances |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO/IEC 20000-3:2012 | Information technology Service management Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| ISO/IEC 17040:2005 | Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies |
| ASTM E 2924 : 2014 | Standard Practice for Intumescent Coatings |
| ISO/IEC TR 20000-5:2013 | Information technology Service management Part 5: Exemplar implementation plan for ISO/IEC 20000-1 |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| BS EN 9104:2006 | Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 9104-002:2016 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| EN 9104:2006 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 9104-003:2010 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| UNE-EN 9104-003:2011 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| ASTM B 294 : 2017 : REDLINE | Standard Test Method for Hardness Testing of Cemented Carbides |
| ECA ILAC P8 : 2012 | ILAC MUTUAL RECOGNITION ARRANGEMENT (ARRANGEMENT): SUPPLEMENTARY REQUIREMENTS AND GUIDELINES FOR THE USE OF ACCREDITATION SYMBOLS AND FOR CLAIMS OF ACCREDITATION STATUS BY ACCREDITED LABORATORIES AND INSPECTION BODIES |
| PD ISO/IEC TR 17028:2017 | Conformity assessment. Guidelines and examples of a certification scheme for services |
| ASTM F 3050 : 2017 | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
| UNI ISO 18436-1 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 1: REQUIREMENTS FOR ASSESSMENT BODIES AND THE ASSESSMENT PROCESS |
| ECA ILAC G27 : 2017 | GUIDANCE ON MEASUREMENTS PERFORMED AS PART OF AN INSPECTION PROCESS |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ASTM E 329 : 2018 : REDLINE | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
| NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
| ACI 355.4M : 2011 | QUALIFICATION OF POST-INSTALLED ADHESIVE ANCHORS IN CONCRETE AND COMMENTARY (METRIC VERSION) |
| PREN 9104-003 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - AUDITOR TRAINING AND QUALIFICATION |
| PREN 9104-001 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| ANSI Z359.7 : 2011 | QUALIFICATION AND VERIFICATION TESTING OF FALL PROTECTION PRODUCTS |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements |
| ISO/IEC Guide 60:2004 | Conformity assessment Code of good practice |
| I.S. EN 9104-001:2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI EN 9104-001 : 2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| NF EN 9104-002 : 2017 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
| ASTM E 103 : 2017 : REDLINE | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| BS EN ISO 6508-2:2015 | Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| BS EN ISO 6508-3:2015 | Metallic materials. Rockwell hardness test Calibration of reference blocks |
| CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| CAN/CSA-ISO/IEC 29169:18 | Information technology ? Process assessment ? Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity (Adopted ISO/IEC 29169:2016, first edition, 2016-04-01) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.