ISO 9044:2016
Current
Current
The latest, up-to-date edition.
Industrial woven wire cloth Technical requirements and tests
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
23-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 9044:2016 defines terms regarding industrial woven wire cloth for screening purposes and specifies maximum permissible error, requirements, and test methods.
It applies to industrial woven wire cloth with square apertures, made of steel, stainless steel, or non-ferrous metals (see ISO 47832). It does not apply to woven wire cloth coated after weaving nor does it apply to pre-crimped and welded wire screens which are covered in ISO 47833 and ISO 14315.
It is of limited application to woven wire cloth used for purposes other than screening which may necessitate other requirements. The alternative requirements may be agreed between the purchaser and the supplier at the time of placing the order.
| DevelopmentNote |
Supersedes ISO/DIS 9044. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN ISO 9044:2001-09 | Identical |
| BS ISO 9044:2016 | Identical |
| NEN ISO 9044 : 2016 | Identical |
| NF ISO 9044 : 1999 | Identical |
| DIN ISO 9044:2017-11 | Identical |
| BS ISO 23900-5 : 2015 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| 04/19987313 DC : DRAFT DEC 2004 | BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| I.S. EN ISO 17824:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| DIN EN 13900-5:2005-07 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| API 13C REDLINE : 2010 | RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION |
| 14/30299385 DC : 0 | BS ISO 23900-5 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| BS ISO 17824 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| PREN 15426 : DRAFT 2017 | CANDLES - SPECIFICATION FOR SOOTING BEHAVIOUR |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| BS EN ISO 13501:2011 | Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation |
| I.S. EN ISO 13501:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| UNI EN ISO 13501 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| BS EN ISO 17824:2014 | Petroleum and natural gas industries. Downhole equipment. Sand screens |
| 08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
| UNI CEN/TS 15366 : 2010 | WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - SOLID ABSORBENTS INTENDED FOR ROAD USAGE |
| 10/30219716 DC : 0 | BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| BS ISO 13501 : 2005 AMD 16886 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| UNI EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ISO 17824:2009 | Petroleum and natural gas industries Downhole equipment Sand screens |
| ISO 13501:2011 | Petroleum and natural gas industries Drilling fluids Processing equipment evaluation |
| BS EN 13900-5:2005 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination by filter pressure value test |
| EN 13900-5:2005 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test |
| EN ISO 17824:2014 | Petroleum and natural gas industries - Downhole equipment - Sand screens (ISO 17824:2009) |
| EN ISO 13501:2011 | Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011) |
| 03/319413 DC : DRAFT NOV 2003 | EN 13900-5 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| I.S. EN 13900-5:2005 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| S.R. CEN TS 15366:2009 | WINTER AND ROAD SERVICE AREA MAINTENANCE EQUIPMENT - SOLID ABSORBENTS INTENDED FOR ROAD USAGE |
| PREN 13900-5 : DRAFT 2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 5: DETERMINATION BY FILTER PRESSURE VALUE TEST |
| DD CEN/TS 15366:2009 | Winter and road service area maintenance equipment. Solid absorbents intended for road usage |
| BS 7579:1992 | Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| 17/30314341 DC : 0 | BS EN 15426 - CANDLES - SPECIFICATION FOR SOOTING BEHAVIOUR |
| BS 7410:1991 | Glossary of terms used in industrial screening |
| API RP 13C : 2014 | RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ISO 23900-5:2015 | Pigments and extenders Methods of dispersion and assessment of dispersibility in plastics Part 5: Determination by filter pressure value test |
| CEN/TS 15366:2009 | Winter and road service area maintenance equipment - Solid absorbents intended for road usage |
| ISO 4783-3:1981 | Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens |
| ISO 14315:1997 | Industrial wire screens — Technical requirements and testing |
| ISO 4783-1:1989 | Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 1: Generalities |
| ISO 4782:1987 | Metal wire for industrial wire screens and woven wire cloth |
| ISO 4783-2:1989 | Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 2: Preferred combinations for woven wire cloth |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 2194:1991 | Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.