ISO 4628-1:2016
Current
Current
The latest, up-to-date edition.
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4628-1:2016 defines a system for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system used throughout ISO 4628. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes, for example yellowing.
The other parts of ISO 4628 provide pictorial standards or other means for evaluating particular types of defect. As far as possible, already existing evaluation schemes have been used as the basis.
ISO 4628-1:2016 is also used for assessing defects not covered by the other parts of ISO 4628.
| DevelopmentNote |
Supersedes ISO/DIS 4628-1. (01/2016)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 4628-1 : 2016 | Identical |
| NBN EN ISO 4628-1 : 2016 | Identical |
| NEN EN ISO 4628-1 : 2016 | Identical |
| NS EN ISO 4628-1 : 2003 | Identical |
| I.S. EN ISO 4628-1:2016 | Identical |
| UNE-EN ISO 4628-1:2016 | Identical |
| PN EN ISO 4628-1 : 2016 | Identical |
| SN EN ISO 4628-1:2016 | Identical |
| UNI EN ISO 4628-1 : 2007 | Identical |
| SS-EN ISO 4628-1:2016 | Identical |
| UNI EN ISO 4628-1:2016 | Identical |
| BS EN ISO 4628-1:2016 | Identical |
| EN ISO 4628-1:2016 | Identical |
| DIN EN ISO 4628-1:2016-07 | Identical |
| ONORM EN ISO 4628-1 : 2016 | Identical |
| DIN 53230:1983-04 | Corresponds |
| NEN ISO 4628-1 : 1989 | Identical |
| DIN 53210:1978-02 | Corresponds |
| NBN T 22 161 : 1984 | Identical |
| BS 3900-H1:1983 | Identical |
| SAC GB/T 30789-1 : 2015 | Identical |
| DIN EN ISO 16151:2008-07 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| UNE-EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| UNI EN ISO 16151 : 2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| 15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| 10/30229703 DC : 0 | BS EN ISO 2812-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
| BS 3900-H6(1991) : 1991 AMD 14123 | METHODS OF TEST FOR PAINTS - EVALUATION OF PAINT AND VARNISH DEFECTS - RATING OF DEGREE OF CHALKING BY TAPE METHOD |
| 11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN ISO 12944-5:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018) |
| BS 7079-A2(1996) : 1996 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS |
| 10/30205803 DC : 0 | BS EN ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
| 12/30237859 DC : 0 | BS ISO 16539 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC CORROSION TESTS WITH EXPOSURE TO SYNTHETIC OCEAN WATER SALT-DEPOSITION PROCESS -"DRY" AND "WET" CONDITIONS AT CONSTANT ABSOLUTE HUMIDITY |
| DIN EN 16301:2013-05 | Natural stone test methods - Determination of sensitivity to accidental staining |
| 11/30245859 DC : 0 | BS EN 16301 - NATURAL STONE TEST METHODS - DETERMINATION OF SENSITIVITY TO ACCIDENTAL STAINING |
| I.S. EN 16301:2013 | NATURAL STONE TEST METHODS - DETERMINATION OF SENSITIVITY TO ACCIDENTAL STAINING |
| ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination |
| ISO/TS 19392-3:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet |
| I.S. EN ISO 2812-4:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
| I.S. ISO 4628-4:1988 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF INTENSITY, QUANTITY AND SIZE OF COMMON TYPES OF DEFECT - PART 4: DESIGNATION OF DEGREE OF CRACKING |
| ISO 16539:2013 | Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity |
| UNE-EN ISO 2812-3:2013 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| UNE-EN 16492:2014 | Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings |
| EN ISO 2812-3:2012 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
| ISO 16053:2010 | Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN ISO 4628-6:2011-12 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| DIN EN ISO 11341:2004-12 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| DIN EN ISO 11507:2007-05 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| BS EN ISO 21227-1:2003 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging General guidance |
| BS EN ISO 20566:2013 | Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| BS EN ISO 4628-2:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of blistering |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| UNE-EN ISO 8565:2012 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| BS EN ISO 8501-2 : 2001 AMD 13359 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - PART 2: VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PREPARATION GRADES OF PREVIOUSLY COATED STEEL SUBSTRATES AFTER LOCALIZED REMOVAL OF PREVIOUS COATINGS |
| I.S. EN ISO 4628-2:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| I.S. EN ISO 4628-3:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING (ISO 4628-3:2016) |
| EN ISO 8501-2:2001 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
| BS 3900-F18(2005) : 2005 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| ONORM EN 927-2 : 2015 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 2: PERFORMANCE SPECIFICATION |
| PREN 13523-21 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 16301 : 2013 | NATURAL STONE TEST METHODS - DETERMINATION OF SENSITIVITY TO ACCIDENTAL STAINING |
| 12/30243830 DC : 0 | BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| BS EN ISO 11997-1:2017 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid |
| 02/123754 DC : DRAFT OCT 2002 | ISO 4628-8 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: EVALUATION OF CORROSION AROUND A SCRIBE |
| DIN 53210:1978-02 | DESIGNATION OF DEGREE OF RUSTING OF PAINT SURFACES |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 12/30247181 DC : DRAFT JAN 2012 | BS ISO 28340 - COMBINED COATINGS ON ALUMINIUM - GENERAL SPECIFICATIONS FOR COMBINED COATINGS OF ELECTROPHORETIC ORGANIC COATINGS AND ANODIC OXIDATION COATINGS ON ALUMINIUM |
| 14/30309761 DC : 0 | BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| BS ISO 27667:2011 | Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| BS 3900-F16(1997) : 1997 AMD 13289 | METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER) |
| DIN EN 16492 E : 2014 | PAINTS AND VARNISHES - EVALUTATION OF THE SURFACE DISFIGUREMENT CAUSED BY FUNGI AND ALGAE ON COATINGS |
| 14/30301162 DC : 0 | BS EN ISO 4628-3 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING |
| PREN ISO 16701 : DRAFT 2011 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011) |
| 13/30274695 DC : 0 | BS EN 927-2 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 2: PERFORMANCE SPECIFICATION |
| 08/30171576 DC : DRAFT APR 2008 | BS ISO 27667 - ROAD VEHICLES - BRAKE LINING FRICTION MATERIALS - EVALUATION OF CORROSION EFFECTS ON PAINTED BACKING PLATES AND BRAKE SHOES |
| BS 3900-F14(1995) : 1995 AMD 9931 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION |
| 14/30301174 DC : 0 | BS EN ISO 4628-7 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD |
| EN ISO 12944-5:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) |
| BS 3900-H2:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of blistering |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| ISO 27667:2011 | Road vehicles — Brake lining friction materials — Evaluation of corrosion effects on painted backing plates and brake shoes |
| I.S. EN 927-6:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| BS EN ISO 16474-1:2013 | Paints and varnishes. Methods of exposure to laboratory light sources General guidance |
| BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| UNE-EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| DIN EN ISO 4628-5:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN ISO 4628-3:2016-07 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016 |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 14267:2004-10 | IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| UNE-EN ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017) |
| BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| I.S. EN ISO 8565:2011 | METALS AND ALLOYS - ATMOSPHERIC CORROSION TESTING - GENERAL REQUIREMENTS |
| I.S. EN ISO 4628-5:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 5: ASSESSMENT OF DEGREE OF FLAKING (ISO 4628-5:2016) |
| I.S. EN 13523-21:2017 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| DIN EN ISO 11341:1998-02 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| I.S. EN ISO 4628-7:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN 13578:2004-03 | Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003 |
| I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
| I.S. EN ISO 8502-3:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017) |
| I.S. EN ISO 4628-4:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
| I.S. EN ISO 4628-8:2012 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN ISO 20566:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH (ISO 20566:2013) |
| I.S. EN ISO 4628-6:2011 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 6: ASSESSMENT OF DEGREE OF CHALKING BY TAPE METHOD (ISO 4628-6:2011) |
| VDI 2083 Blatt 18:2012-01 | Cleanroom technology - Biocontamination control |
| VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
| BS 3900-F12(1997) : 1997 AMD 13288 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| BS 3900-H4(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| BS 3900-H5(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 5: ASSESSMENT OF DEGREE OF FLAKING |
| BS 3900-H2(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING |
| BS 3900-H3(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING |
| BS 3900-H3:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of rusting |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| BS EN ISO 2812-1:2017 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
| 11/30215685 DC : 0 | BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| I.S. EN ISO 11507:2007 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN ISO 16701:2015 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| DIN EN 13523-21:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS ISO 28340:2013 | Combined coatings on aluminium. General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium |
| BS EN 16301:2013 | Natural stone test methods. Determination of sensitivity to accidental staining |
| BS ISO 16701 : 2003 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| 16/30345769 DC : 0 | BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| 10/30206987 DC : 0 | BS EN ISO 4628-6 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 6: ASSESSMENT OF DEGREE OF CHALKING BY TAPE METHOD |
| BS 3900-H7(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD |
| BS EN ISO 2812-4:2017 | Paints and varnishes. Determination of resistance to liquids Spotting methods |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| I.S. EN ISO 16474-1:2013 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| NFL 10-201 : 1998 | AEROSPACE SERIES - LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MM ON METALLIC SUBSTRATE - QUALITY OF COATED PARTS |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| DIN EN ISO 16474-1:2014-03 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| UNI EN ISO 16474-1 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| EN ISO 16151:2008 | Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, 'dry' and 'wet' conditions (ISO 16151:2005) |
| UNE-EN ISO 15110:2018 | Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) |
| UNI EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
| ISO 16151:2005 | Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions |
| ISO 2812-4:2017 | Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
| EN ISO 12944-1:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| I.S. ISO 4628-3:1988 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF INTENSITY, QUANTITY AND SIZE OF COMMON TYPES OF DEFECT - PART 3: DESIGNATION OF DEGREE OF RUSTING |
| UNE-EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| I.S. EN ISO 16151:2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, 'DRY' AND 'WET' CONDITIONS |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| DIN EN ISO 4628-2:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING (ISO 4628-2:2016) |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN ISO 4628-4:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING (ISO 4628-4:2016) |
| BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
| UNE-EN ISO 4628-6:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| UNE-EN ISO 4628-8:2013 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| ISO 16701:2015 | Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
| UNE-EN ISO 4628-7:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| UNE-EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| BS EN ISO 15710:2006 | Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| BS EN ISO 4628-7:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of chalking by velvet method |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| I.S. EN ISO 2810:2004 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| UNI EN ISO 4628-8 : 2013 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN ISO 4628-6 : 2011 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 6: ASSESSMENT OF DEGREE OF CHALKING BY TAPE METHOD |
| EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
| UNI EN ISO 8565 : 2011 | METALS AND ALLOYS - ATMOSPHERIC CORROSION TESTING - GENERAL REQUIREMENTS |
| EN ISO 2812-1:2017 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
| BS EN 16492:2014 | Paints and varnishes. Evaluation of the surface disfigurement caused by fungi and algae on coatings |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| 12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| BS ISO 16539:2013 | Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. \'Dry\' and \'wet\' conditions at constant absolute humidity |
| PREN 927-6 : DRAFT 2016 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| BS 3900-F19(2000) : 2000 AMD 16874 | METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| BS 3900-F18:1998 | Methods of test for paint. Durability tests on paint films Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle |
| BS 3900-H4:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of cracking |
| ONORM EN ISO 16151 : 2008 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| DIN EN 16492:2014-09 | PAINTS AND VARNISHES - EVALUTATION OF THE SURFACE DISFIGUREMENT CAUSED BY FUNGI AND ALGAE ON COATINGS |
| 12/30268985 DC : 0 | BS EN 16492 - PAINTS AND VARNISHES - EVALUATION OF THE SURFACE DISFIGUREMENT CAUSED BY FUNGI AND ALGAE ON COATINGS |
| BS 3900-H5:1983 | Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of flaking |
| ONORM EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| 11/30231401 DC : 0 | BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| 14/30301158 DC : 0 | BS EN ISO 4628-2 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING |
| 14/30301166 DC : 0 | BS EN ISO 4628-4 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING |
| 16/30234880 DC : 0 | BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| BS 3900-H8(2005) : 2005 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| BS ISO 15710 : 2002 AMD 16861 | PAINTS AND VARNISHES - CORROSION TESTING BY ALTERNATE IMMERSION IN AND REMOVAL FROM A BUFFERED SODIUM CHLORIDE SOLUTION |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| BS ISO 16151 : 2005 | CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, "DRY" AND "WET" CONDITIONS |
| SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| BS EN ISO 16151:2008 | Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, \'dry\' and \'wet\' conditions |
| UNI EN 16492 : 2014 | PAINTS AND VARNISHES - EVALUATION OF THE SURFACE DISFIGUREMENT CAUSED BY FUNGI AND ALGAE ON COATINGS |
| I.S. EN ISO 11997-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017) |
| ISO/TS 19392-2:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm |
| I.S. EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| UNI EN ISO 11130 : 2010 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| I.S. EN ISO 15110:2017 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017) |
| ISO 12944-5:2018 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| UNE-EN ISO 16474-1:2014 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) |
| EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
| BS EN ISO 12944-4:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation |
| DIN EN ISO 12944-5:2016-06 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| BS EN ISO 12944-1:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems General introduction |
| BS EN ISO 2812-3:2012 | Paints and varnishes. Determination of resistance to liquids Method using an absorbent medium |
| UNE-EN ISO 2812-4:2018 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
| EN ISO 12944-4:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017) |
| UNE-EN 16301:2014 | Natural stone test methods - Determination of sensitivity to accidental staining |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| EN ISO 15110:2017 | Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) |
| UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| IEC 61892-1:2015 | Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions |
| I.S. EN ISO 2812-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| BS EN ISO 11341:2004 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| 14/30293263 DC : 0 | BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS |
| ISO 20566:2013 | Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
| BS EN ISO 4628-4:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of cracking |
| BS EN ISO 4628-6:2011 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of chalking by tape method |
| UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| BS EN 13529:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN ISO 11507:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
| UNE-EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| BS EN ISO 4628-3:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of rusting |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| BS EN ISO 4628-8:2012 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| ISO 21227-1:2003 | Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance |
| BS EN 13523-21:2017 | Coil coated metals. Test methods Evaluation of outdoor exposed panels |
| ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
| UNE-EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| BS EN ISO 8565:2011 | Metals and alloys. Atmospheric corrosion testing. General requirements |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| UNE-EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
| UNE-EN ISO 2812-1:2018 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
| EN ISO 4628-3:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN 3212:1995 | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
| EN 927-2:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| EN ISO 8565:2011 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN ISO 21227-1:2003 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 15710:2006 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN ISO 11341:2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN ISO 4628-7:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| EN ISO 11507:2007 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
| EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| EN 16492:2014 | Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings |
| EN ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017) |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| UNI EN 927-2 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 2: PERFORMANCE SPECIFICATION |
| 03/115104 DC : DRAFT OCT 2003 | ISO 16151 - CORROSION OF METALS AND ALLOYS - ACCELERATED CYCLIC TESTS WITH EXPOSURE TO ACIDIFIED SALT SPRAY, DRY AND WET CONDITIONS |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| I.S. EN ISO 11341:2004 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| 17/30350881 DC : DRAFT SEP 2017 | BS ISO 14993 - CORROSION OF METALS AND ALLOYS - ACCELERATED TESTING INVOLVING CYCLIC EXPOSURE TO SALT MIST, DRY AND WET CONDITIONS |
| DIN EN 927-2:2014-11 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| BS EN ISO 15110:2017 | Paints and varnishes. Artificial weathering including acidic deposition |
| 11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| 14/30289470 DC : 0 | BS ISO 3668 - PAINTS AND VARNISHES - VISUAL COMPARISON OF THE COLOUR OF PAINTS |
| 14/30301170 DC : 0 | BS EN ISO 4628-5 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 5: ASSESSMENT OF DEGREE OF FLAKING |
| BS EN 927-2:2014 | Paints and varnishes. Coating materials and coating systems for exterior wood Performance specification |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| 17/30346602 DC : 0 | BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| 16/30327434 DC : 0 | BS EN ISO 12944-1 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTE CTIVE COATING SYSTEMS - PART 1: GENERAL INTRODUCTION |
| 16/30337296 DC : 0 | BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
| DIN EN ISO 16701:2015-10 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| BS EN ISO 16701:2015 | Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| DD ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination |
| BS ISO 11997-1 : 2005 AMD 16875 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| 16/30340557 DC : 0 | BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| I.S. EN 16492:2014 | PAINTS AND VARNISHES - EVALUATION OF THE SURFACE DISFIGUREMENT CAUSED BY FUNGI AND ALGAE ON COATINGS |
| UNI EN ISO 20566 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH |
| UNE-EN 927-2:2015 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| I.S. EN 927-2:2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 2: PERFORMANCE SPECIFICATION |
| UNE-EN ISO 11130:2011 | Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010) |
| NF EN ISO 11130 : 2010 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| I.S. EN ISO 12944-1:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN ISO 11130:2010-12 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ISO 28340:2013 | Combined coatings on aluminium — General specifications for combined coatings of electrophoretic organic coatings and anodic oxidation coatings on aluminium |
| ISO 16474-1:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance |
| BS IEC 61892-1:2015 | Mobile and fixed offshore units. Electrical installations General requirements and conditions |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| ISO 15110:2017 | Paints and varnishes — Artificial weathering including acidic deposition |
| EN ISO 2812-4:2017 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
| I.S. EN ISO 2812-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
| ISO 16311-4:2014 | Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ONORM EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN 13529:2003-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - RESISTANCE TO SEVERE CHEMICAL ATTACK |
| DIN EN 3212:1995-11 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED SODIUM CHLORIDE SOLUTION |
| BS EN 13578:2003 | Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| ISO 4628-7:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| BS EN 1337-9:1998 | Structural bearings Protection |
| BS EN ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| BS EN ISO 4628-5:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of flaking |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 16301:2013 | Natural stone test methods - Determination of sensitivity to accidental staining |
| DIN EN ISO 9227:2017-07 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| DIN EN ISO 8502-3:2017-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR PAINTING (PRESSURE-SENSITIVE TAPE METHOD) (ISO 8502-3:2017) |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| DIN EN ISO 8565:2011-09 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| DIN EN ISO 15710:2006-09 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
| EN 1337-9:1997 | Structural bearings - Part 9: Protection |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| ISO 13076:2012 | Paints and varnishes Lighting and procedure for visual assessments of coatings |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.