ISO 2859-3:2005
Current
Current
The latest, up-to-date edition.
Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
27-05-2005
$292.11
Including GST where applicable
ISO 2859-3:2005 specifies generic skip-lot sampling procedures for acceptance inspection by attributes. The purpose of these procedures is to provide a way of reducing the inspection effort on products of high quality submitted by a supplier who has a satisfactory quality assurance system and effective quality controls. The reduction in inspection effort is achieved by determining at random, with a specified probability, whether a lot presented for inspection will be accepted without inspection. This procedure extends the principle of the random selection of sample items already applied in ISO 2859-1 to the random selection of lots.
The skip-lot sampling procedures specified in ISO 2859-3:2005 are applicable to, but not limited to, inspection of end items, such as complete products or sub-assemblies, components and raw materials, and materials in process.
| DevelopmentNote |
Supersedes ISO/DIS 2859-3 (05/2005) Also numbered as BS 6001-3(2005). (06/2005) Also numbered as BIS IS 2500-4. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS Z 9015-3:2011 | Identical |
| NF ISO 2859-3 : 2005 | Identical |
| GOST R ISO 2859-3 : 2009 | Identical |
| NEN ISO 2859-3 : 2005 | Identical |
| UNE-ISO 2859-3:2014 | Identical |
| NBN ISO 2859 3 : 1993 | Identical |
| BS 6001-3:2005 | Identical |
| DIN ISO 2859-3:2007-10 | Identical |
| NS ISO 2859-3 : 2ED 2006 | Identical |
| BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
| DIN EN 16256-3:2013-03 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE |
| CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| ISO 2859-5:2005 | Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| 17/30344317 DC : 0 | BS ISO 49 AMENDMENT 1 - MALLEABLE CAST IRON FITTINGS THREADED TO ISO 7-1 |
| 10/30219542 DC : 0 | BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| BS ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| PD CR 13909:2002 | Identification card systems. Intersector thin flexible cards. Acceptance criteria |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| BS ISO 6305-2:2007 | Railway components. Technical delivery requirements Non-alloy carbon steel baseplates |
| CEI EN 60300-3-2 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| SAE AS9138 | Aerospace Series - Quality Management Systems Statistical Product Acceptance Requirements |
| 17/30333593 DC : 0 | BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING |
| DIN EN ISO 186:2002-08 | Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS 6001-0:2006 | Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes |
| BS 6001-0(2017) : 2017 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES |
| DIN ISO 2859-2:1993-04 | Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985 |
| S.R. CR 13909:2000 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA |
| 03/312758 DC : DRAFT AUG 2003 | ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
| BS ISO 28590:2017 | Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| I.S. EN 60300-3-2:2005 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
| DIN EN 1783:2003-06 | MATCHES - PERFORMANCE REQUIREMENTS, SAFETY AND CLASSIFICATION |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| ONORM EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| BS 6001-2:1993 | Sampling procedures for inspection by attributes Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| NF EN 62058-11 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| BS ISO/TR 12031:2000 | Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration |
| BIS IS 2500-1 : 2000(R2017) | SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| 07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BS 6001-0:1996 | Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| PREN 9138 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| I.S. EN 16256-3:2012 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 3: REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 1: Acceptance sampling |
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 2: Sampling by attributes |
| ISO 2859-0:1995 | Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products — Sherardizing — Specification |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| 03/102273 DC : DRAFT MAR 2003 | BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
| NF ISO 2859-1 : 2000 AMD 1 2011 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| I.S. EN 13811:2003 | SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
| 04/30110040 DC : DRAFT FEB 2004 | BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| 94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
| S.R. CWA 17094-1:2016 | POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS |
| 03/108624 DC : DRAFT JULY 2003 | IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| BS EN 60300-3-2:2005 | Dependability management Application guide. Collection of dependability data from the field |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| 07/30168266 DC : 0 | BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS |
| CR 13909:2000 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots — Part 3: Sampling by variables |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| BS EN 1783:1997 | Matches. Performance requirements, safety and classification |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN ISO 186:2002 | Paper and board. Sampling to determine average quality |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| BS EN 13811:2003 | Sherardizing. Zinc diffusion coatings on ferrous products. Specification |
| BS EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 16256-3:2012 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance |
| EN 13811:2003 | Sherardizing - Zinc diffusion coatings on ferrous products - Specification |
| EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN ISO 17526:2003 | Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| ISO 6305-2:2007 | Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| BS EN 16256-3:2012 | Pyrotechnic articles. Theatrical pyrotechnic articles Requirements for construction and performance |
| ISO/TR 12031:2000 | Micrographics — Inspection of silver-gelatin microforms for evidence of deterioration |
| BS ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| 15/30330450 DC : 0 | BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| 00/564528 DC : DRAFT SEP 2000 | BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 4527:2003 | Metallic coatings — Autocatalytic (electroless) nickel-phosphorus alloy coatings — Specification and test methods |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| BS 6001-1(1999) : 1999 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION |
| EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
| DIN EN 13811:2003-08 | SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS SPECIFICATION |
| BS 6001-4:2005 | Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| I.S. EN 1783:1997 | MATCHES - PERFORMANCE REQUIREMENTS, SAFETY AND CLASSIFICATION |
| UNE-ISO 2859-1:2012 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
| UNE-ISO 2859-10:2013 | Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| UNE-ISO 2859-5:2014 | Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| UNE-EN 16256-3:2013 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 3: Requirements for construction and performance |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.