ISO 23550:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Safety and control devices for gas burners and gas-burning appliances General requirements
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
15-03-2019
Superseded by
Published date
10-03-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 23550:2011 specifies safety, constructional and performance requirements and testing of safety control or regulating devices and sub-assemblies or fittings for burners and gas-burning appliances using such fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG). It is not applicable to corrosive and waste gases.
ISO 23550:2011 is applicable to the following controls: automatic shut-off valves; burner controls; flame supervision devices; gas/air ratio controls; pressure regulators; manual taps; mechanical thermostats; multifunctional controls; pressure-sensing devices; valve-proving systems; zero regulators.
The test methods given in ISO 23550:2011 are intended for product type testing. Tests intended for production testing are not specifically included.
| DevelopmentNote |
Supersedes ISO/FDIS 23550. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 23550 : 2018 | Identical |
| BS ISO 13574:2015 | Industrial furnaces and associated processing equipment. Vocabulary |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls |
| UNE-EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| BS ISO 22968:2010 | Forced draught oil burners |
| BS ISO 23551-6:2014 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Thermoelectric flame supervision controls |
| 12/30249472 DC : 0 | BS ISO 13574 - INDUSTRIAL FURNACES AND ASSOCIATED THERMAL PROCESSING EQUIPMENT - VOCABULARY |
| 15/30313338 DC : 0 | BS ISO 23551-8 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
| BS ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Vent valves |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| BS ISO 23551-8:2016+A1:2019 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| BS ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| CAN/CSA-E60730-2-6:17 | Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (Adopted IEC 60730-2-6:2015, third edition, 2015-04, with Canadian deviations) |
| ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| 14/30303563 DC : 0 | BS ISO 23551-9 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 9: MECHANICAL GAS THERMOSTATS |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| ISO 23551-6:2014 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 6: Thermoelectric flame supervision controls |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 13/30260415 DC : 0 | BS ISO 23551-5 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 5: MANUAL GAS VALVES |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 15/30329968 DC : 0 | BS ISO 23551-10 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES PARTICULAR REQUIREMENTS - PART 10: VENT VALVES |
| BS ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Mechanical gas thermostats |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| ISO 22968:2010 | Forced draught oil burners |
| ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves |
| CSA C22.2 No. 139 : 2013 : R2018 | ELECTRICALLY OPERATED VALVES |
| ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves |
| 10/30215301 DC : 0 | ISO 23551-1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| OVE/ONORM EN 62282-3-100 : 2013 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012) |
| UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| 13/30266431 DC : 0 | BS ISO 23551-6 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES PARTICULAR REQUIREMENTS - PART 6: THERMOELECTRIC FLAME SUPERVISION DEVICES |
| OVE/ONORM EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012) |
| ISO 23551-9:2015 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 9: Mechanical gas thermostats |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| CSA C22.2 No. 139 : 2013 | ELECTRICALLY OPERATED VALVES |
| ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
| ISO 13577-4:2014 | Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
| ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| BS ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances Manual gas valves |
| BS ISO 13577-4:2014 | Industrial furnace and associated processing equipment. Safety Protective systems |
| BS EN 60730-2-6:2016 | Automatic electrical controls Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 23551-3:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 3: Gas/air ratio controls, pneumatic type |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| ISO 23551-2:2006 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| I.S. EN 60730-2-6:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 2-6: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ISO 1400:1975 | Vulcanized rubbers of high hardness (85 to 100 IRHD) Determination of hardness |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 301:2006 | Zinc alloy ingots intended for castings |
| SAE J512 : 1997 | AUTOMOTIVE TUBE FITTINGS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.