ISO 15614-8:2016
Current
Current
The latest, up-to-date edition.
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
08-03-2016
$184.68
Including GST where applicable
ISO 15614-8:2016 specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized, fully mechanized, or automatic processes.
ISO 15614-8:2016 is a part of a series of standards. Details of this series are given in ISO 15607, Annex A.
Qualification by tube to tube-plate joint tests can be used for all joints even if they are fully loaded or only seal welded as required in application standards.
ISO 15614-8:2016 applies to fusion welding of metallic materials for tube to tube-plate joints with a remaining gap between the tube and the tube-plate for some length of the tube-plate thickness. This part of ISO 15614 does not apply to tube-sheets with forged end connections with welded tubes (external/internal bore welds).
For welding of tube to tube-plate joints with mechanical expansion which is load bearing, welding procedure test is to be defined.
For other applications and/or requirements, this part of ISO 15614 can be used if required by the specification.
Repair welding is to be considered in the welding procedure test.
| Committee |
ISO/TC 44/SC 10
|
| DevelopmentNote |
Supersedes ISO/FDIS 15614-8. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 15614-8:2002-06 | Identical |
| NF EN ISO 15614-8 : 2016 | Identical |
| NBN EN ISO 15614-8 : 2016 | Identical |
| NEN EN ISO 15614-8 : 2016 | Identical |
| NS EN ISO 15614-8 : 2002 | Identical |
| PN EN ISO 15614-8 : 2016 | Identical |
| SS-EN ISO 15614-8 : 2016 | Identical |
| BS EN ISO 15614-8:2016 | Identical |
| EN ISO 15614-8:2016 | Identical |
| DIN EN ISO 15614-8:2014-02 (Draft) | Identical |
| UNE-EN ISO 15614-8:2016 | Identical |
| I.S. EN ISO 15614-8:2016 | Identical |
| 07/30168326 DC : DRAFT DEC 2007 | BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
| I.S. EN ISO 14732:2013 | WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013) |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ONORM EN ISO 3834-5 : 2015 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 (ISO 3834-5:2015) |
| DIN EN ISO 14732:2013-12 | WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013) |
| 14/30292703 DC : 0 | BS EN ISO 3834-5 - QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
| I.S. EN ISO 3834-5:2015 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: DOCUMENTS WITH WHICH IT IS NECESSARY TO CONFORM TO CLAIM CONFORMITY TO THE QUALITY REQUIREMENTS OF ISO 3834-2, ISO 3834-3 OR ISO 3834-4 |
| BIS IS 16003 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ONORM EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EEMUA 143 : 1985 | RECOMMENDATIONS FOR TUBE END WELDING |
| BS EN ISO 14732:2013 | Welding personnel. Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| 04/30094315 DC : DRAFT FEB 2004 | BS EN ISO 3834-5 - QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 5: NORMATIVE REFERENCES TO FULFIL THE REQUIREMENTS OF ISO 3834-2, ISO 3834-3 AND ISO 3834-4 |
| BS EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials — Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 04/30125235 DC : DRAFT NOV 2004 | EN 15085-2 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| DIN EN ISO 3834-5:2015-11 | Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| BS EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
| EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| DIN EN ISO 15613:2004-09 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| API SPEC 17L1:2021 | Specification for Ancillary Equipment for Flexible Pipes and Subsea Umbilicals |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| UNE-EN ISO 14732:2014 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| UNE-EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| ASME STP-NU-078 : 2016 | COMPARISON REPORT ON WELDING QUALIFICATION AND WELDING QUALITY ASSURANCE |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| ISO 9606-4:1999 | Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
| ISO 6520-1:2007 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| EN 1708-1:2010 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
| ISO 9606-5:2000 | Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 3452-1:2013 | Non-destructive testing — Penetrant testing — Part 1: General principles |
| ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding |
| ISO 17639:2003 | Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials — General rules |
| ISO 9015-1:2001 | Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| ISO 9606-3:1999 | Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.