IEC 60304:1982
Current
Current
The latest, up-to-date edition.
Standard colours for insulation for low-frequency cables and wires
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, English, French
Published date
01-01-1982
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
PREFACE
1 Scope
2 Object
3 Numerical code for abbreviated designation
Standard colours
Applies to thermoplastic insulation for low-frequency cables and wires. Gives the standard colours to be used.
| Committee |
TC 46/SC 46C
|
| DevelopmentNote |
Stability Date: 2020. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS 6746C:1969 | Similar to |
| NEN 3093 : 1989 | Identical |
| DIN IEC 60304:1987-01 | Identical |
| HD 402 : 200S2 | Identical |
| DIN 47002:1987-08 | Identical |
| UNE 20631:1985 | Identical |
| DIN 47002:1987-08 | Corresponds |
| CLC/TS 50430:2005 | Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes |
| CEI EN 61375-3-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) |
| BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
| BS 6356-12:1997 | Spraying equipment for crop protection Sprayer nozzles. Colour coding for identification |
| BS EN 61196-3:1999 | Radio-frequency cables. Specifications Sectional specification for coaxial cables for local area networks |
| 06/30148633 DC : DRAFT APR 2006 | EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
| 15/30319951 DC : 0 | BS EN 60794-3-60 - OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN / FLOATING INTO DRINK DRINKING WATER PIPES |
| 07/30172537 DC : 0 | BS EN 60794-5-20 - OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| UNE-EN 50525-1:2012 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
| 12/30259054 DC : DRAFT JAN 2012 | BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES |
| BS EN 60794-1-22:2012 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
| CLC/TS 50429:2005 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
| CEI CLC/TS 50430 : 2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
| CEI EN 60684-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
| CEI CLC/TS 50431 : 2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
| 02/205756 DC : DRAFT MAY 2002 | IEC 60794-4. ED 2.0 - OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| BS EN 62952-3:2017 | Power sources for a wireless communication device Generic energy harvesting adapter module |
| BS EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
| DEFSTAN 61-12(PT25)/4(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10 MM[2] CROSS SECTIONAL AREA |
| BS IEC 60793-2:1998 | Optical fibres Product specifications |
| CEI EN 61067-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
| BS EN 50441-3:2006 | Cables for indoor residential telecommunication installations Screened cables. Grade 3 |
| UTEC 93 531-13 : 2003 | SCREENED CABLES FOR INDOOR TELECOMMUNICATION INSTALLATIONS, CLASS 2 |
| BS EN 187104:2001 | Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to beused as underwater cables for lakes and river crossings, etc |
| 15/30332693 DC : 0 | BS EN 60794-2 - OPTICAL FIBRE CABLES - PART 2: INDOOR OPTICAL FIBRE CABLES - SECTIONAL SPECIFICATIONS |
| UNE-EN 50290-2-1:2010 | Communication cables -- Part 2-1: Common design rules and construction |
| DEFSTAN 60-1(PT1)/2(1992) : 1992 | CABLES, FIBRE OPTIC - EQUIPMENT CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS |
| CEI CLC/TS 50429 : 2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
| BS EN 60794-4-10:2014 | Optical fibre cables Family specification. Optical ground wires (OPGW) along electrical power lines |
| ES 203 408 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); COLOUR AND MARKING OF DC CABLE AND CONNECTING DEVICES |
| 10/30215867 DC : 0 | BS EN 50441-2 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
| 08/30184169 DC : DRAFT JUNE 2008 | BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 60684-1:2003 | Flexible insulating sleeving Definitions and general requirements |
| CEI EN 50407-1 : 2006 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
| CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| VDE 0816-2 : 1988 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; SIGNAL AND MEASURING CABLES, MINING CABLES |
| I.S. EN 60794-5-10:2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| I.S. EN 60793-2:2016 | OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
| IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
| I.S. EN 60794-5:2016 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| I.S. EN 60794-3-70:2016 | OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
| I.S. EN 50441-4:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| NF EN 60794-2-10 : 2011 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
| CEI EN 60794-4-20 : 2013 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
| BS EN 60794-4-20:2012 | Optical fibre cables Aerial optical cables along electrical power lines. Family specification for ADSS (All Dielectric Self Supported) optical cables |
| CEI EN 50441-2 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
| DIN VDE 0816-2 : 1988 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; SIGNAL AND MEASURING CABLES, MINING CABLES |
| UNE-EN 60794-2:2011 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| I.S. CLC TS 50431:2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
| BS EN 62026-2:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i) |
| EN 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60794-2-20:2014 | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables |
| EN 187103:2003 | Family specification - Optical fibre cables for indoor applications |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| EN 50441-3:2006 | Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
| EN 60794-5:2016 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| EN 60794-3-50 : 2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| EN 50441-4:2012 | Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
| EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
| EN 50441-1:2012 | Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
| EN 50525-1:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| EN 60684-3-145 to 147:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving |
| EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| EN 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements |
| EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| EN 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| EN 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
| EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| DEFSTAN 60-1(PT3)/2(1996) : 1996 | CABLES, FIBRE OPTIC - PART 3: CABLES, FIBRE OPTIC, (EXTERNAL) FOR TACTICAL FIELD DEPLOYMENT (LAND SYSTEMS) |
| DEFSTAN 60-1(PT0)/1(1992) : 1992 | CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL |
| DEFSTAN 61-12(PT25)/2(1992) : 1992 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 25: CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 SQ MM CROSS SECTIONAL AREA |
| DEFSTAN 61-12(PT18)/4(1995) : 1995 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 18: EQUIPMENT WIRES, LIMITED FIRE HAZARD |
| DEFSTAN 60-1(PT1)/3(1998) : 1998 CORR 1998 | CABLES, FIBRE OPTIC - PART 1: EQUIPMENT CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS |
| DEFSTAN 61-12(PT7)/2(1986) : 1986 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 7: CORDS, ELECTRICAL GENERAL REQUIREMENTS |
| DEFSTAN 60-1(PT0)/2(2000) : 2000 | CABLES, FIBRE OPTIC - PART 0: GENERAL REQUIREMENTS AND TEST METHODS |
| DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
| EN 187200:2001 | Sectional Specification: Optical cables to be used along electrical power lines (OCEPL) |
| EN 187104:2001 | Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. |
| CEI EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 4708-001:2014 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Technical specification |
| BS EN 60794-5-10:2014 | Optical fibre cables Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| BS EN 50441-4:2012 | Cables for indoor residential telecommunication installations Cables up to 1 200 MHz. Grade 3 |
| BS EN 187200:2001 | Harmonized systems of quality assessment for electronic components. Sectional specificaton. Optical cables to be used along electrical power lines (OCEPL) |
| BS EN IEC 60794-1-22:2018 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
| PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| ES 202 319 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS AND CABLES; OPTICAL FIBRE CABLES TO BE USED FOR PATCHCORD APPLICATIONS FOR SINGLE-MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING |
| BS EN 60793-2:2012 | Optical fibres Product specifications. General |
| DIN EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 07/30163858 DC : 0 | BS EN 60794-3-40 - OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| NF EN 60794-3 : 2015 | OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - OUTDOOR CABLES |
| 03/309905 DC : DRAFT JUNE 2003 | IEC 60794-3-50 ED.1 - MICRO-CABLES, FIBRE UNITS AND MINI-TUBE SYSTEMS FOR INSTALLATION BY BLOWING TECHNIQUES |
| 03/311609 DC : DRAFT AUG 2003 | IEC 62255-3 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 3: SECTIONAL SPECIFICATION FOR FILLED CABLES |
| BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| 15/30319947 DC : 0 | BS EN 60794-3-50 - OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/INTO GAS PIPES |
| 05/30128543 DC : DRAFT JAN 2005 | IEC 60794-3-11 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES - DETAILED SPECIFICATION |
| 04/30117159 DC : DRAFT JUL 2004 | EN 50441-2 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: GRADE 2 |
| 13/30267621 DC : 0 | BS EN 61481-1 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| BS EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks Aerial cables |
| 13/30286065 DC : 0 | BS EN 60794-5 - OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| BS EN 60794-2-20:2014 | Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables |
| DEFSTAN 61-12(PT18)/2(1985) : 1985 CORR | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS PT 18 EQUIPMENT WIRES, LIMITED FIRE HAZARD |
| DEFSTAN 61-12(PT25)/5(2010) : 2010 | WIRES, CORDS AND CABLES ELECTRICAL - PART 25: WIRES AND CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10MM[2] CROSS SECTIONAL AREA |
| 14/30310002 DC : 0 | BS EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
| BS EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
| NF EN 187105 : 2002 | SINGLE-MODE OPTICAL FIBRE CABLE (DUCT/DIRECT BURIED INSTALLATION) |
| 17/30350080 DC : 0 | BS EN 50441-5 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
| CEI EN 50441-3 : 2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
| BS EN 60794-2-10:2011 | Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables |
| 00/246334 DC : DRAFT DEC 2000 | IEC 61156-6 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 6: SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS WITH TRANSMISSION CHARACTERISTICS UP TO 600 MHZ - WORK AREA WIRING - SECTIONAL SPECIFICATION |
| CEI EN 60794-3-60 : 2010 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
| 06/30153348 DC : DRAFT JULY 2006 | |
| BS EN 61067-1:1997 | Glass and glass polyester fibre woven tapes Definitions, classification and general requirements |
| BS EN 60684-3-145 to 147:2001 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PTFE sleeving |
| IEC 62255-2:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification |
| I.S. EN 50525-1:2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 1: GENERAL REQUIREMENTS |
| IEC 61156-3:2008 | Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification |
| PREN 50407-2 : DRAFT 2012 | MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
| CEI EN 60794-2-30 : 2010 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
| CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| NF EN 60684-1 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| CEI EN 60794-3-11 : 2012 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
| IEC 61156-5:2009+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| I.S. EN 62012-1:2002 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
| I.S. CLC TS 50430:2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
| I.S. EN IEC 60794-1-22:2018 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
| I.S. EN 61375-3-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012 (EQV)) |
| I.S. EN 50441-2:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
| I.S. EN 60794-2:2017 | OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION |
| CEI EN 60708 : 2006 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| I.S. EN 61067-1:1999 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
| UNE-EN 60794-2-30:2011 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| IEC 62255-4:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification |
| NFC 32 201-1 : 2003 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 1: GENERAL REQUIREMENTS |
| IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
| EN 60793-2:2016 | Optical fibres - Part 2: Product specifications - General |
| IEC 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| NF EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
| UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| IEC 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| IEC 60794-5:2014 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| IEC 61067-1:1991 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements |
| DIN EN 60684-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING; SHEET 151: EXTRUDED PVC/NITRILE SLEEVING; GENERAL PURPOSE |
| VDE 0341-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING; EXTRUDED PVC/NITRILE SLEEVING; GENERAL PURPOSE |
| VDE 0340-1 : 1997 | SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN 61067-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
| VDE 0338-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
| PREN 50441-2 : DRAFT 2010 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
| UTEC 93 533 : 2009 | CABLES WITH POLYVINYL CHLORIDE INSULATION AND POLYVINYL CHLORIDE SHEATH FOR CABLING AND INDOOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
| 08/30178186 DC : DRAFT FEB 2008 | BS EN 60794-5-10 - OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| EN 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| 04/30126721 DC : DRAFT DEC 2004 | IEC 60189-2 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 2: CABLES IN PAIRS, TRIPLES, QUADS AND QUINTUPLES FOR INSIDE INSTALLATIONS |
| I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| 15/30332072 DC : 0 | BS EN 62952-3 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: ENERGY HARVESTING SPECIFICATION |
| CEI EN 62952-3 : 1ED 2018 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
| I.S. EN 50441-1:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
| BS EN 60794-3-70:2016 | Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| I.S. EN 62026-2:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD)) |
| BS EN 60794-2:2017 | Optical fibre cables Indoor cables. Sectional specification |
| BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| BS EN 60794-3-40:2008 | Optical fibre cables Outdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| 04/30115140 DC : DRAFT JUN 2004 | IEC 60794-5 - OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION FOR MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| 10/30215863 DC : 0 | BS EN 50441-1 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
| BS 6893-1(1987) : 1987 AMD 9073 | FLEXIBLE INSULATING SLEEVING FOR ELECTRICAL PURPOSES - SPECIFICATION FOR GENERAL REQUIREMENTS |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 03/311608 DC : DRAFT AUG 2003 | IEC 62255-2 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 2: SECTIONAL SPECIFICATION FOR UNFILLED CABLES |
| CEI EN 60794-5-20 : 2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
| 02/206871 DC : DRAFT JULY 2002 | PREN 187201 - FAMILY SPECIFICATION - OPTICAL GROUND WIRE |
| 09/30205454 DC : 0 | BS EN 61375-3-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-1: MVB - MULTIPURPOSE VEHICLE BUS |
| 04/30117162 DC : DRAFT JUL 2004 | EN 50441-3 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: GRADE 3 |
| 02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| 14/30310028 DC : 0 | BS EN 60794-1-1 - OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
| I.S. EN 60794-4-10:2014 | OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPTICAL GROUND WIRES (OPGW) ALONG ELECTRICAL POWER LINES |
| CEI EN 50406-2 : 2006 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
| 13/30292880 DC : 0 | BS EN 60794-3-70 - OPTICAL FIBRE CABLES - PART 3.70: FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
| BS EN 50441-2:2012 | Cables for indoor residential telecommunication installations Screened cables. Grade 1 |
| NF EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| BS EN 61375-3-1:2012 | Electronic railway equipment. Train communication network (TCN) Multifunction Vehicle Bus (MVB) |
| CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| PREN 50441-5 : DRAFT 2017 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
| 05/30131385 DC : DRAFT MAR 2005 | IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
| 07/30164159 DC : 0 | BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES |
| 04/30117156 DC : DRAFT JUL 2004 | EN 50441-1 - UN-SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: GRADE 1 |
| BS EN 60794-3-60:2008 | Optical fibre cables Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
| CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| IEC 62952-3:2017 | Power sources for a wireless communication device - Part 3: Generic energy harvesting adapter module |
| I.S. EN 50441-3:2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
| I.S. EN 60794-1-1:2016 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
| I.S. EN 60684-1:2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| I.S. EN 60794-3:2002 | OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - OUTDOOR CABLES |
| I.S. EN 60794-2-10:2011 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV)) |
| I.S. EN 60794-5-20:2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| DEFSTAN 61-12(PT18)/3(1990) : 1990 AMD 3 1993 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, EQUIPMENT WIRES, LIMITED FIRE HAZARD |
| CEI EN 60794-2-10 : 2012 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
| I.S. EN 60794-2-20:2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
| VDE 0816-3 : 1988 COR 2 2010 | Corrigendum to DIN VDE 0816-3 (VDE 0816-3):1988-02 |
| DIN VDE 0816-3 : 1988 COR 2 2010 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; PAPER INSULATED CABLES |
| IEC PAS 62255-1:2001 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
| CEI EN 50441-1 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
| UNI EN 4708-001 : 2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| PREN 50441-1 : DRAFT 2010 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
| I.S. EN 60794-3-40:2008 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| IEC 60189-3:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples |
| BIS IS 14493-7 : 2012(R2015) | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 7: SYMMETRICAL PAIR CABLES WITH TRANSMISSION CHARACTERISTICS UP TO 1200 MHZ - SECTIONAL SPECIFICATION FOR DIGITAL AND ANALOG COMMUNICATION CABLES |
| EN 60454-1:1994 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
| IEC 62255-3:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification |
| IEC 62255-5:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification |
| IEC 61156-7:2003+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables |
| IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
| IEC 60454-1:1992 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
| NF EN 50441-1 : 2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UN-SCREENED CABLES - GRADE 1 |
| IEC 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
| IEC 60684-3-151:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| CEI EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
| IEC 60794-1-1:2015 RLV | Optical fibre cables - Part 1-1: Generic specification - General |
| BS 7810-1:1995 | Specification for glass and glass polyester fibre woven tapes Definitions, classification and general requirements |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| EN IEC 60794-1-22:2018 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| 11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
| NF EN 60684 3-151 : 1998 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| 00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
| BS EN 60684-3-151:1998 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PVC/nitrile rubber. General purpose |
| 09/30205446 DC : 0 | BS EN 61375-2-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 2-1: WTB - WIRE TRAIN BUS |
| 04/30126724 DC : DRAFT DEC 2004 | IEC 60189-3 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 3: EQUIPMENT WIRES WITH SOLID OR STRANDED CONDUCTOR, PVC INSULATED, IN SINGLES, PAIRS AND TRIPLES |
| CEI EN 60794-3-40 : 2010 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| UNE-EN 60794-5:2012 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
| 10/30230826 DC : DRAFT JULY 2010 | BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
| 03/316192 DC : DRAFT SEP 2003 | IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS |
| 14/30310858 DC : 0 | BS EN 60794-4-20 - OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
| 07/30170352 DC : DRAFT AUG 2007 | BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS |
| 08/30188764 DC : 0 | BS EN 50525-1 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - CABLES FOR GENERAL APPLICATIONS |
| BS EN 60794-3-50:2008 | Optical fibre cables Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
| BS EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks Duct and buried cables |
| BS EN 60794-3-11:2010 | Optical fibre cables Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
| BS 6893-2:1987 | Flexible insulating sleeving for electrical purposes Methods of test |
| BS EN 60794-2-30:2008 | Optical fibre cables Indoor cables. Family specification for ribbon cables |
| CEI EN 62012-1 : 2003 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 50290-2-1:2005 | Communication cables Common design rules and construction |
| 16/30338646 DC : 0 | BS EN 60794-1-31 - OPTICAL FIBRE CABLES - PART 1-31: SECTIONAL SPECIFICATION FOR CABLE ELEMENT - OPTICAL FIBRE RIBBONS |
| 03/311610 DC : DRAFT AUG 2003 | IEC 62255-5 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 5: SECTIONAL SPECIFICATION FOR FILLED DROP CABLES |
| DEFSTAN 61-12(PT33)/2(1994) : 1994 AMD 3 1999 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, AIRFRAME WIRES AND CABLES IN TEMPERATURE CATEGORIES 135 DEG C, 150 DEG C, 200 DEG C AND 260 DEG C |
| 12/30260599 DC : 0 | BS EN 50407-2 - MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
| UNE-EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| NF EN 50441-4 : 2017 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
| 07/30148629 DC : 0 | BS EN 60794-3-10 - OPTICAL FIBRE CABLES - PART 3-10: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES |
| PREN 4708-001 : DRAFT 2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| 03/313880 DC : DRAFT SEP 2003 | IEC 62255-4 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 4: SECTIONAL SPECIFICATION FOR AERIAL DROP CABLES |
| PREN 4840-001 : DRAFT 2016 | AEROSPACE SERIES - HEAT SHRINKABLE MOULDED SHAPES - PART 001: TECHNICAL SPECIFICATION |
| NFF 61 014 : 1998 | RAILWAY ROLLING STOCK - ELECTRICAL CONNECTING OF BRAIDED WIRE AND SHIELDED CABLE |
| UTEC 93 531-15 : 2008 | INDOOR COMMUNICATION SCREENED CABLE - SCREENED CABLES FOR INDOOR COMMUNICATIONS - RADIOFREQUENCY TELEVISION APPLICATIONS INCLUDING SATELLITE INTERMEDIATE BAND |
| NFC 93 533 : 94 AMD 1 96 XP | ELECTRONIC COMPONENTS - CABLES WITH PVC INSULATION AND PVC SHEATH FOR WIRING AND INDOOR TRANSMISSION EQUIPMENT - GENERIC SPECIFICATION |
| IEC PAS 61156-5:2001 | Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification |
| NF EN 60794-3-60 : 2013 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
| DEFSTAN 61-12(PT33)/1(1992) : INTERIM | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - AIRFRAME WIRES AND CABLES IN TEMPERATURE CATEGORIES 135 DEG C, 150 DEG C, 200 DEG C AND 260 DEG C |
| UNE 212002-2:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations. |
| I.S. EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012 (EQV)) |
| I.S. EN 187103:2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| I.S. EN 60794-3-50:2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| CLC/TS 50431:2005 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
| CEI EN 60794-5-10 : 2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
| BS EN 60794-3:2015 | Optical fibre cables Sectional specification. Outdoor cables |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| CEI EN 50441-4 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
| CEI EN 60794-3-50 : 2010 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
| EN 62026-2:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| I.S. EN 60794-3-11:2010 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
| I.S. EN 60454-1:1995 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
| IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| IEC 61156-8:2009+AMD1:2013 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification |
| IEC PAS 61156-6:2001 | Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification |
| IEC 61156-4:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification |
| IEC 62026-2:2008 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| IEC 61156-2:2010 | Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification |
| IEC 61375-3-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) |
| IEC 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| IEC 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| IEC 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| IEC 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
| IEC 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| IEC 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| IEC 60794-2-20:2013 | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables |
| IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
| IEC 60794-5-10:2014 | Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| IEC 60794-3-50:2008 | Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
| IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| EN 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
| EN 50441-2:2012 | Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
| EN 4708-001:2014 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification |
| BS EN 187103:2003 | Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications |
| 16/30344964 DC : 0 | BS EN 4708-001 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| DEFSTAN 61-12(PT34)SEC1/1(1992) : 1992 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 34: RIBBON CABLES - SECTION 1: RIBBON CABLES, 1.27 MM PITCH SUITABLE FOR INSULATION DISPLACEMENT CONNECTOR (IDC) TERMINATION SECTIONAL SPECIFICATION |
| BS EN 60794-5:2016 | Optical fibre cables Sectional specification. Microduct cabling for installation by blowing |
| CEI EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
| CEI EN 60684-1 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
| 15/30320892 DC : 0 | BS EN 60794-4 - OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| BS 7630:1993 | Generic specification for symmetric pair/quad and multicore cables for digital communication |
| UNE-EN 60794-1-22:2015 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| CEI EN 60794-1-22 : 2013 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
| 13/30286069 DC : 0 | BS EN 60794-3 - OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - DOOR CABLES |
| 03/308375 DC : DRAFT JUNE 2003 | IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
| BS EN 50525-1:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) General requirements |
| EN 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| BS DD IEC PAS 62255-1 : 2001 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
| 09/30197559 DC : 0 | BS EN 60794-3-11 ED.2 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT AND DIRECTLY BURIED SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
| 07/30163862 DC : 0 | BS EN 60794-3-50 - OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUB-DUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/INTO GAS PIPES |
| 13/30292534 DC : 0 | BS EN 60794-4-10 ED 2.0 - OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPGW (OPTICAL GROUND WIRES) ALONG ELECTRICAL POWER LINES |
| NF EN 60684 3 145 TO 147 : 2002 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 145 TO 147: EXTRUDED PTFE SLEEVING |
| NF EN 60794-3-40 : 2015 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
| BS EN 60794-5-20:2014 | Optical fibre cables Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| I.S. EN 60684-3-151:1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
| 14/30310016 DC : 0 | BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
| CEI EN 60794-2-20 : 2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
| BS EN 60794-4:2003 | Optical fibre cables Sectional specification. Aerial optical cables along electrical power lines |
| I.S. EN 50407-3:2014 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATIONS NETWORKS - PART 3: INDOOR MULTI-PAIR/QUAD RISER CABLES UP TO 100 MHZ FOR MAXIMUM LENGTH OF CONNECTION 100 M SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBIT/S OVER IP |
| 05/30133337 DC : DRAFT MAY 2005 | IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK |
| NF EN 60794-4-10 : 2007 | OPTICAL FIBRE CABLES - PART 4-10: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR OPGW (OPTICAL GROUND WIRES) |
| BS EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks Outdoor cables |
| 02/207659 DC : DRAFT JULY 2002 | PREN 50290-2-1 - COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
| I.S. EN 60794-4:2003 | OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| NF EN 60794-4 : 2004 | OPTICAL FIBER CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| CEI EN 50525-1 : 2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 60-1(PT2)/2(1992) : 1992 | CABLES, FIBRE OPTIC - CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS - SECTIONAL SPECIFICATION |
| BS EN 50441-1:2012 | Cables for indoor residential telecommunication installations Unscreened cables. Grade 1 |
| I.S. 201-1:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| I.S. EN 60708:2005 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| I.S. EN 62952-3:2017 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
| I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| CEI EN 60794-2 : 2003 | OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION |
| CEI EN 60794-5 : 2008 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
| BS EN 60794-1-1:2016 | Optical fibre cables Generic specification. General |
| I.S. EN 60794-2-30:2008 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
| I.S. EN 60794-1-22:2012 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS (IEC 60794-1-22:2012 (EQV)) |
| I.S. EN 4708-001:2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| UTEC 93 526 : 2004 | CABLES WITH POLYOLEFIN INSULATION AND POLYOLEFIN SHEATH FOR LOCAL AREA TELECOMMUNICATION NETWORKS - GENERIC SPECIFICATION |
| DEFSTAN 61-12(PT25)/3(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 MM[2] CROSS SECTIONAL AREA |
| NF EN 60794-2-30 : 2015 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
| UTEC 93 530 : 2005 | ELECTRONIC COMPONENTS - CABLES WITH SYMMETRICAL CIRCUITS FOR HIGH FREQUENCY TRANSMISSION - GENERIC SPECIFICATION |
| I.S. EN 50290-2-1:2005 | COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| I.S. CLC TS 50429:2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
| IEC 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| I.S. EN 61196-3:1999 | RADIO FREQUENCY CABLES - PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS |
| I.S. EN 60794-3-60:2008 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
| IEC 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| 06/30148719 DC : DRAFT APR 2006 | IEC 62026-2 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (C DIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
| IEC 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
| EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
| IEC 60794-1-22:2017 RLV | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| EN 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
| EN 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
| EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
| EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| EN 61067-1:1997 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements |
| EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| EN 60684-3-151:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose |
| EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks |
| EN 62952-3:2017 | Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module |
| EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
| EN 61375-3-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012) |
| EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
| EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
| EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.