Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

04-12-2015

Superseded by

IEC 62631-3-1:2016
IEC 62631-3-2:2015

Language(s)

English - French

Published date

01-01-1980

Publisher

International Electrotechnical Committee

$281.73

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Contents
Foreword
Preface
Clause
1. Scope
2. Definitions
3. Significance
4. Power supply
5. Measuring methods and accuracy
6. Test specimens
7. Electrode material
8. Specimen handling and mounting
9. Conditioning
10. Test procedure
11. Calculation
12. Report
Appendix A - Examples of measuring methods and their
accuracy
Appendix B - Formulae for calculating A and p
Figures

Gives test procedures and calculations for the determination of volume and surface resistivity. Establishes recommendations for: values of voltage and time of application; nature and geometry of electrodes temperature and humidity of atmosphere and test specimens; conditioning of test specimens.

Committee	TC 112
DevelopmentNote	Also numbered as BS 6233(1982) (09/2005) Stability Date: 2015. (11/2012)
DocumentType	Standard
Pages	40
PublisherName	International Electrotechnical Committee
Status	Superseded
SupersededBy	IEC 62631-3-1:2016 IEC 62631-3-2:2015
Supersedes	IEC 60093:1958/COR1:1958 IEC 60093:1958

Standards	Relationship
CEI 15-23 : 1997	Identical
NFT 51 731 : 80 FD	Similar to
NEN 10093 : 1986	Identical
VDE 0303-30 : 1993	Identical
UNE 21303:1983	Identical
HD 429 : 200S1	Identical
NFC 26 215 : 1982	Identical
DIN IEC 60093 : 1993	Identical

I.S. EN ISO 9988-2:2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
NF EN 60464-2 : 2002 AMD 1 2006	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
BS EN ISO 16396-2:2017	Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
PREN ISO 7792-2 : DRAFT 2011	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7792-2:2012	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
14/30304058 DC : 0	BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 15015 : 2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
00/243942 DC : 0	PREN 50359-1-2 - ADVANCED TECHNICAL CERAMICS - PART 1-2: ELECTRICAL PROPERTIES - DETERMINATION OF THE SURFACE AND VOLUME RESISTIVITY IN THE TEMPERATURE RANGE 20 DEGREE C TO 800 DEGREE C
06/30130313 DC : DRAFT MAR 2006	ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
10/30211370 DC : DRAFT JUNE 2010	BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
16/30334902 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
BS 5664-2.1(1979) : 1979	SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST
06/30155368 DC : 0	PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
CEI EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
BS ISO 24453:2008	Rubber. Acquisition and presentation of comparable single-point data
UNE-EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
15/30294124 DC : 0	BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
DIN EN ISO 17855-2:2016-06	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
15/30315534 DC : 0	BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 5737:1979	Method for the measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
DIN EN ISO/IEC 80079-34:2012-03	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011)
NFC 33 009-2 : 2008	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
04/30115317 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
BS 5629-2:1979	Insulating varnishes containing solvent Test methods
CEI EN 61537 : 2007	CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
CEI EN 60544-2 : 2013	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
UNE-EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
CEI EN 60034-18-34 : 2013	ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS
I.S. EN ISO 7391-2:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 62333-3:2010	NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
I.S. EN 61241-1:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
CEI EN 60079-32-2 : 2016	EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
I.S. HD 631.2:2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
HD 631.2 : 2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
PD CLC/TR 60079-32-1:2015	Explosive atmospheres Electrostatic hazards, guidance
NF EN 62329-2 : 2006	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
EN 60455-3-8:2013	Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
CSA C22.2 No. 0.17 : 2000	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN 62329-2:2006	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
ASTM D 5935 : 1996	Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
I.S. EN 61189-2:2006	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES
I.S. EN ISO 11963:2012	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 11833-1:2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
DIN EN ISO 4613-2:2004-12	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14598-3:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN 14598-2:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
DIN EN 13415:2010-05	TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
BS EN ISO 4613-2:1995	Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14879-2:2006	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components
BS EN ISO 1622-2:1999	Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 13677-2:2003	Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
ISO 15103-2:2007	Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 19069-2:2016	Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14530-2:2000	Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 15252-2:2000	Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2003	Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006	Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14879-5:2007	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
DIN EN ISO 1872-2:2000-12	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 2580-2:2004	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 12281:2002	Printing and business paper - Requirements for copy paper for dry toner imaging processes
EN 13415:2010	Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
DIN EN 14879-4:2008-01	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
EN 61241-1:2004/corrigendum Dec. 2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
EN 62333-3:2010	Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
DIN EN 14879-2:2007-02	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 60034-18-34:2012	Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
DIN EN ISO 3672-2:2002-07	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60079-32-2:2015	Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 61340-4-5:2004	Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
DIN 2875:2002-06	FLANGED STEEL PIPES AND FITTINGS WITH HARD OR SOFT RUBBER LININGS - TECHNICAL DELIVERY CONDITIONS
DEFSTAN 93-63/1(1992) : 1992	METHOD FOR SPECIFYING POLYAMIDE (PA) HOMOPOLYMERS FOR MOULDING & EXTRUSION
ONORM EN ISO 11542-2 : 2009	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 62333-3:2010	Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet
CEI EN 61340-4-8 : 2016	ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS
I.S. EN ISO 12086-2:2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 62631-1:2011	Dielectric and resistive properties of solid insulating materials General
07/30165210 DC : 0	BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
BS 7825-3.2:1997	Calibration of rubber and plastics test equipment. Calibration schedules Electrical properties
14/30267388 DC : 0	BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
BS EN 61241-1:2004	Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\'
BS EN 60455-3-8:2013	Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
CEI EN 62631-1 : 2012	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE-EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
09/30200088 DC : 0	BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
05/30091855 DC : DRAFT MAR 2005	ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 50395 : 2005	ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
DIN EN 14879-6:2010-04	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
02/204778 DC : DRAFT JULY 2002	IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
NF EN 14879-6 : 2010	ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
17/30365113 DC : 0	BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
BS ISO 17194:2007	Structural adhesives. A standard database of properties
BS EN 60034-18-34:2012	Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
DIN EN ISO 19069-2:2016-07	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS ISO 2897-2 : 1994 AMD 10661	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 61537:2007	Cable management. Cable tray systems and cable ladder systems
04/30109201 DC : DRAFT OCT 2004	EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
BS ISO 4894-2 : AMD 10662	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
07/30161672 DC : 0	BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA
BS ISO 14910-2 : 1997 AMD 16024	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN 60684-2 : 2012	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
ISO 20558-2:2018	Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
S.R. CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
ISO 20029-2:2017	Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN ISO/IEC 80079-34:2011	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
I.S. EN 60544-4:2003	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
DIN EN ISO 16396-2:2017-07	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
ONORM EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60455-3-8 : 2014	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
UNI EN ISO 11833-1 : 2012	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
UNE-EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
UNE-EN ISO 20028-2:2017	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
CSA C22.2 No. 0.17 : 2000 : R2013	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 5575 : 2007 : R2013	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
CEI EN 50290-2-30 : 2002	COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING
I.S. EN 60286-6:2004	PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
ISO 8606:1990	Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
I.S. EN 61340-4-5:2004	ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON
IEC 62899-201:2016	Printed electronics - Part 201: Materials - Substrates
DIN EN ISO 1874-2:2013-03	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN ISO 10350-2:2011-06	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
DIN EN ISO 15103-2:2007-09	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 14530-2:2000-08	Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN ISO 2580-2:2004-05	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 15526-2:2004	Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2012	Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14528-2:2000	Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 1872-2:2007	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14598-2:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
I.S. EN ISO 15526-2:2004	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7391-2:2006-06	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11833-1:2012-11	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012)
NF EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14663-2:2006	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 34811:1999-09	CROSS- RECESSED FLAT HEAD PLASTIC SCREWS
I.S. EN ISO 15103-2:2007	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 34814:1999-09	PLASTIC HEXAGON NUTS
EN ISO 11963:2012	Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
I.S. EN ISO 2898-2:2008	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 34812:1999-09	CROSS- RECESSED PAN HEAD PLASTIC SCREWS
I.S. EN ISO 4894-2:1999	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 1873-2:2000-12	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 34813:1999-09	CROSS- RECESSED CHEESE HEAD PLASTIC SCREWS
I.S. EN ISO 3673-2:2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
I.S. EN ISO 11542-2:1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11963:2013-03	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN 14125:2013	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
DIN EN ISO 15526-2:2004-10	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 1874-2:2012	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
I.S. EN ISO 10366-2:2004	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISA 61241-0 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
DIN 28055-2:1991-02	CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING
NF EN ISO 2580-2 : 2004	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 903-0:2003	Physical testing of rubber General
BS 3412:1992	Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 4936:1987	Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
BS 1493:1987	Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
VDI 2083 Blatt 9.2:2017-01	Cleanroom technology - Consumables in the cleanroom
VDE 0335-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST
BS 7933-1:2007	Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
VDE 0303-31 : 1993	METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS
BS 903-C1:1991	Physical testing of rubber Determination of surface resistivity
DIN EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
CEI EN 62329-2 : 2007	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
14/30312008 DC : 0	BS EN 61340-2-3 ED. 2 - ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION
15/30327856 DC : 0	BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
BS EN ISO 25137-2:2017	Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN ISO 2897-2:2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30231856 DC : 0	BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
14/30304062 DC : 0	BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30236286 DC : 0	BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS ISO 23559:2011	Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
14/30304003 DC : 0	BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
NF EN ISO 9988-2 : 2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30242905 DC : 0	BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 17855-2:2016	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 61340-4-8:2015	Electrostatics Standard test methods for specific applications. Electrostatic discharge shielding. Bags
08/30176905 DC : DRAFT JAN 2008	BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
13/30240167 DC : 0	BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 20028-2:2017	Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 25137-2 : 2009	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS CECC00015-1(1991) : AMD 7443	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BASIC SPECIFICATION: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES - GENERAL REQUIREMENTS
BS EN 14879-6:2009	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
BS EN ISO 15015:2011	Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
BS EN 60455-2:2015	Resin based reactive compounds used for electrical insulation Methods of test
NFC 33 009-1 : 2008	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
NFC 32 102-2 : 1999 AMD 1 2003	RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2: TEST METHODS
15/30328314 DC : 0	BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
BS EN 60286-6:2004	Packaging of components for automatic handling Bulk case packaging for surface mounting components
BS EN 50281-1-1:1999	Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
12/30263853 DC : 0	BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING
BS ISO 3672-2 : 2000 AMD 13326	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10366-2 : 94 AMD 10665	PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 62333-3 : 2011	NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
BS ISO 2580-2 : 94 AMD 10660	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
08/30165044 DC : DRAFT FEB 2008	BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60684-2:2011	Flexible insulating sleeving Methods of test
BS ISO 7391-2 : 1996 AMD 10746	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 14910-2:2013	Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
04/30122412 DC : DRAFT SEP 2004	ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
BS EN 62329-2:2006	Heat shrinkable moulded shapes Methods of test
BS ISO 2898-2 : 1997 AMD 10727	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1622-2 : 1995 AMD 10649	PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15015:2011-07	Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
HD 631.1 : 200S2	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
BS ISO 28078-2:2009	Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN 60544-2:2012	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
NF ISO 17194 : 2009	STRUCTURAL ADHESIVES - A STANDARD DATABASE OF PROPERTIES
I.S. EN 50395:2005	ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
I.S. EN 61340-4-8:2015	ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS
I.S. EN 60455-2:2015	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN ISO 15015:2011	PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 17855-2:2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
I.S. EN 61537:2007	CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
BS 4618-2.3:1975	Recommendations for the presentation of plastics design data. Electrical properties Volume resistivity
I.S. EN 60079-32-2:2015	EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
I.S. EN ISO 25137-2:2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
ISO 11833-1:2012	Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm
EN ISO 7391-2:2006	Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 20029-2:2018	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
ISO 8605:2001	Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification
I.S. EN ISO 8986-2:2009	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60464-2:2002	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
IEC 61241-1-1:1999	Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
ISO 17194:2007	Structural adhesives A standard database of properties
DIN EN ISO 6402-2:2004-05	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 2897-2:2004-05	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 12086-2:2006	Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 62329-2:2006	Heat-shrinkable moulded shapes - Part 2: Methods of test
BS EN ISO 3673-2:2012	Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS EN ISO 14923:2003	Thermal spraying. Characterization and testing of thermally sprayed coatings
ISO 17855-2:2016	Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1873-2:2007	Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 1163-2:1995	Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 13415:2010	Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
ISO 2898-2:2008	Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 3673-2:2012-10	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
UNE-EN ISO 11833-1:2012	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
BS EN 12281:2002	Printing and business paper. Requirements for copy paper for dry toner imaging processes
BS EN ISO 10350-2:2011	Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
UNI EN ISO 10350-2 : 2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
UNE-EN ISO 11963:2013	Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
UNE-EN ISO 1874-2:2013	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
EN ISO 14663-2:2006	Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
I.S. EN ISO 10350-2:2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
EN 13763-24:2002	Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube
EN ISO 14923:2003	Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
UNI EN ISO 1874-2 : 2013	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 3673-2 : 2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
UNI EN ISO 11963 : 2013	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
UNI EN ISO 2898-2 : 2009	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 7792-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 13415 : 2010	TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
UNI EN 14125 : 2013	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNI EN ISO 14910-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60249-1 : 1993 COR 1994	BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS
UNI EN ISO 8986-2 : 2010	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 50281-1-1 : 98 AMD 1 2002	ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
UNI EN 14879-6 : 2010	ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
BS 1755-1:1982	Glossary of terms used in the plastics industry Polymer and plastics technology
UNI EN ISO 12086-2 : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 20029-2:2018	Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
12/30263857 DC : 0	BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
I.S. EN ISO 6402-2:2004	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60079-32-2:2015	Explosive atmospheres Electrostatics hazards. Tests
BS EN 60544-4:2003	Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments
BS ISO 16365-2:2014	Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
BS ISO 7792-2 : 1997 AMD 15252	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 2951:2012	Rubber, vulcanized or thermoplastic Determination of insulation resistance
I.S. EN ISO 1873-2:2007	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60684-2:2011	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
I.S. EN 12281:2002	PRINTING AND BUSINESS PAPER - REQUIREMENTS FOR COPY PAPER FOR DRY TONER IMAGING PROCESSES
PREN 14125 : DRAFT 2011	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
I.S. EN ISO 1872-2:2007	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 8605:2001	Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification
11/30192003 DC : 0	BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30128281 DC : DRAFT JAN 2005	ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 9988-2 : 2006	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 4618-2.4:1975	Recommendations for the presentation of plastics design data. Electrical properties Surface resistivity
07/30167352 DC : DRAFT AUG 2007	BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
DIN EN ISO 9988-2:2015-05	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
06/30130317 DC : DRAFT JULY 2006	ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
BS ISO 14663-2 : 1999 AMD 16029	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 7933-2:2007	Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
01/704739 DC : DRAFT FEB 2001	PREN 14125 - UNDERGROUND PIPEWORK FOR PETROL FILLING STATIONS
DD ENV 12281:1997	Paper. Printing and business paper. Requirements for copy paper for dry toner imaging processes
17/30354769 DC : 0	BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC TR 61278:1997	Live working. Guidelines for dielectric testing of tools and equipment
03/118818 DC : DRAFT DEC 2003	BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 19069-2:2016	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS 7290-2(1990) : 1990 AMD 10106	PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST
NF ISO 8605 : 2002	PLASTIQUES RENFORCES AU VERRE TEXTILE - MATS PREIMPREGNES SMC - BASE DE SPECIFICATION
I.S. EN 1081:1998	RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
NF EN 60247 : 2004	INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY
15/30304408 DC : 0	BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 12086-2 : 2001 AMD 10637	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
BS EN 60464-2:2001	Varnishes used for electrical insulation Methods of test
BS PD IEC TS 60079-32-1 : 2013	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
UNE-EN ISO 16396-2:2017	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
ISA 61241-1 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
I.S. EN 60034-18-34:2012	ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS (IEC 60034-18-34:2012 (EQV))
BS IEC 62899-201 : 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
CEI UNI EN ISO/IEC 80079-34 : 2013	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
I.S. EN ISO 20029-2:2018	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
ISO 11963:2012	Plastics Polycarbonate sheets Types, dimensions and characteristics
DIN EN ISO 20028-2:2015-08 (Draft)	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
PREN ISO 11833-1 : DRAFT 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM
NF EN 60674-2 : 98 AMD 1 2002	SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS EN 1081:1998	Resilient floor coverings. Determination of the electrical resistance
CEI EN 61106 : 1998	VIDEODISKS METHODS OF MEASUREMENT FOR PARAMETERS
ISO 16365-2:2014	Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
EN 1081:1998	Resilient floor coverings - Determination of the electrical resistance
ISO 24453:2008	Rubber Acquisition and presentation of comparable single-point data
I.S. EN ISO 14910-2:2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
UNE-EN ISO 14910-2:2014	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
DIN EN ISO 11542-2:2010-01	Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
UNE-EN ISO 7792-2:2013	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
BS EN ISO 11963:2012	Plastics. Polycarbonate sheets. Types, dimensions and characteristics
02/124520 DC : DRAFT DEC 2002	EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS
BS EN ISO 14529-2:2000	Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
13/30276640 DC : 0	BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
ISO 2897-2:2003	Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 61241-1:2004	Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
BS EN 12576:1998	Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
ISO 14528-2:1999	Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 20028-2:2017	Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 4613-2:1995	Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 13677-3:2003	Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements
BS EN ISO 3672-2:2001	Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
ISO/IEC 80079-34:2011	Explosive atmospheres Part 34: Application of quality systems for equipment manufacture
BS EN 62282-4-101:2014	Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 14879-4:2007	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components
ISO 1874-2:2012	Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 62631-1:2011	Dielectric and resistive properties of solid insulating materials - Part 1: General
IEC 60544-2:2012	Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
IEC 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
IEC 60464-2:2001+AMD1:2006 CSV	Varnishes used for electrical insulation - Part 2: Methods of test
EN ISO/IEC 80079-34:2011	Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)
ISO 2580-2:2003	Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003	Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 60455-2:2015	Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 14530-2:1999	Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN 14879-3:2006	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components
ISO 14923:2003	Thermal spraying Characterization and testing of thermally sprayed coatings
UNE-EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
ISO 4894-2:1995	Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14529-2:1999	Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
IEC 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
UNE-EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
ISO 12086-2:2006	Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3672-2:2000	Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
IEC 60286-6:2004	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
I.S. EN 13415:2010	TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES
BS EN ISO 14527-2:2000	Preparation of test specimens and determination of properties
ISO 7792-2:2012	Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 61537:2006	Cable management - Cable tray systems and cable ladder systems
ISO 16396-2:2017	Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 10350:1993	Plastics Acquisition and presentation of comparable single-point data
BS EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS EN 14598-3:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 1622-2:1995	Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60034-18-34:2012	Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
ISO 6402-2:2003	Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 11833-1:2012	Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm
IEC 60455-3-8:2013	Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
ISO 11542-2:1998	Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60672-2:1999	Ceramic and glass insulating materials - Part 2: Methods of test
IEC 60247:2004	Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
11/30233799 DC : 0	BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
ISO 25137-2:2009	Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
NF EN ISO 2898-2 : 2009	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 14526-2:1999	Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003	Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:2009	Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 61340-4-8:2014	Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags
IEC 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
ISO 9988-2:2006	Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 13763-24:2002	Explosives for civil uses. Detonators and relays Determination of the electrical non-conductivity of shock tube
IEC 62333-3:2010	Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
ISO 3673-2:2012	Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
BS EN ISO 6402-2:2003	Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006	Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 2897-2:2003	Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14526-2:2000	Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
EN 61340-4-8:2015	Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags
EN 14879-3:2006	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 14879-2:2006	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN ISO 1163-2:1999	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
EN ISO 2898-2:2008	Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN 14879-5:2007	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN ISO 15252-2:1999	Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)
EN ISO 8986-2:2009	Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN ISO 15526-2:2004	Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN 13677-3:2003	Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN 13677-2:2003	Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN ISO 14529-2:1999	Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)
EN ISO 1874-2:2012	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 10366-2:2003	Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
EN ISO 1873-2:2007	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN ISO 3672-2:2001	Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
EN ISO 2580-2:2003	Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
EN ISO 16396-2:2017	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN ISO 14530-2:1999	Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)
EN 14879-6:2009	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN ISO 20028-2:2017	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 1622-2:1999	Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
EN ISO 4894-2:1999	Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
EN ISO 14528-2:1999	Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)
EN ISO 1872-2:2007	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 3673-2:2012	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 14526-2:1999	Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)
EN ISO 14910-2:2013	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN ISO 15103-2:2007	Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 11833-1:2012	Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN 14598-3:2005	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN ISO 15015:2011	Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011)
EN ISO 7792-2:2012	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 6402-2:2003	Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003)
EN 14879-4:2007	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
EN ISO 14527-2:1999	Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)
EN ISO 2897-2:2003	Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)
NF EN 62631-1 : 2011	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL
11/30212452 DC : 0	BS ISO 2951 - VULCANIZED RUBBER - DETERMINATION OF INSULATION RESISTANCE
03/313661 DC : DRAFT SEP 2003	EN 50395 - ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
04/30123435 DC : DRAFT OCT 2004	IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS
ISO 23559:2007	Plastics Film and sheeting Guidance on the testing of thermoplastic films
BS ISO 6402-2 : 94 AMD 10652
02/205601 DC : DRAFT APR 2002	IEC 60286-6. ED. 2.0 - CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS
02/205209 DC : DRAFT JULY 2002	IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
CEI EN 60684-2 : 2012	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
05/30129619 DC : DRAFT FEB 2005	IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT
BS EN 60544-2:2012	Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
96/201186 DC : DRAFT FEB 1996	IEC 60684-3-214 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 3:1
BS EN 50290-2-30:2002	Communication cables. Common design rules and construction Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
BS EN ISO/IEC 80079-34:2011	Explosive atmospheres Application of quality systems for equipment manufacture
BS EN 60247:2004	Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity
CEI EN 60247 : 2004	INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY
04/30123574 DC : DRAFT OCT 2004	EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
NF EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
13/30267324 DC : 0	BS EN 61340-4-8 ED 2.0 - ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS
I.S. EN ISO 19069-2:2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
I.S. EN 60249-1:1994	BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS
BS IEC 61340-5.1 : 1998 AMD 13198	ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS
BS EN 60672-2:2000	Ceramic and glass insulating materials Methods of test
BS ISO 1268-8:2004	Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
08/30170332 DC : DRAFT JAN 2008	BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
15/30304402 DC : 0	BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 5575 : 2007	Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
BS EN 61340-4-5:2004	Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person
PD IEC/TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
IEC 60544-4:2003	Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
09/30194359 DC : 0	BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS
04/30091870 DC : DRAFT FEB 2004	BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 3126:1987	Method of specifying toughened polystyrene (SB) moulding and extrusion materials
BS ISO 11833-1:1998	Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm
07/30152076 DC : 0	BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60544-4 : 2005	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
CSA C22.2 No. 0.17 : 2000 : R2004	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
DIN 28055-2:2002-04	CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING
BS EN ISO 9988-2:2015	Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties
PREN ISO 11963 : DRAFT 2011	PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
I.S. EN 14879-6:2009	ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
UNE-EN 62631-1:2012	Dielectric and resistive properties of solid insulating materials - Part 1: General
DIN EN 1081:1998-04	RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE
I.S. EN ISO 20028-2:2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
CEI EN 61340-4-5 : 2006	ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERISING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON
IEC TR 62392:2006	Suitability of typical electrical insulating material (EIM) for polymer recycling
I.S. EN ISO 16396-2:2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
I.S. EN 60455-3-8:2013	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
I.S. EN 60672-2:2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
ISO 20557-2:2018	Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
I.S. EN 62631-1:2011	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL
ISO 28078-2:2009	Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNI CEI EN ISO/IEC 80079-34 : 2012	EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE
BS ISO 14309:2011	Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity
DIN EN ISO 25137-2:2016-08 (Draft)	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
CLC/TR 60079-32-1:2015	Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
I.S. EN 50290-2-30:2002	COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION - POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING
ISO 7391-2:2006	Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14309:2011	Rubber, vulcanized or thermoplastic Determination of volume and/or surface resistivity
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
IEC TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
I.S. EN 60247:2004	INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY
DIN EN ISO 7792-2:2013-03	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
DIN EN ISO 10366-2:2004-05	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14125:2013-09	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
BS EN ISO 8986-2:2009	Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 60079-32-2:2016	Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
BS EN ISO 15103-2:2007	Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 13415:2002	Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films
BS EN ISO 14910-2:2013	Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
ISO 15252-2:1999	Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 2898-2:2008	Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008)
UNE-EN ISO 3673-2:2013	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
BS EN ISO 1163-2:2000	Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 1872-2:2007	Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14663-2:1999	Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14631:1999	Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
ISO 14527-2:1999	Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 15526-2:2000	Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012	Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
02/124519 DC : DRAFT DEC 2002	EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
BS EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures
ISO 15015:2011	Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods
DIN EN ISO 2898-2:2009-03	PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 2874:2002-06	Flanged steel pipes and flanged steel or cast iron pipes and fittings with PTFE or PFA linings – Technical delivery conditions
NF EN ISO 2897-2 : 2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 50290-2-30:2002	Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
EN 50395 : 2005 AMD 1 2011	ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
DIN EN 14879-3:2007-02	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
DIN EN ISO 14663-2:2006-06	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60544-4:2003	Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
DIN EN ISO 12086-2:2006-05	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 62329-2:2006	Heat shrinkable moulded shapes - Part 2: Methods of test
DIN EN ISO 14910-2:2013-06	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
EN 60286-6:2004	Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
EN 60464-2:2001/A1:2006	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 61537:2007	Cable management - Cable tray systems and cable ladder systems
EN 60672-2:2000	Ceramic and glass insulating materials - Part 2: Methods of test
DIN EN ISO 14923:2003-10	THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
EN 60544-2:2012	Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
DIN EN 14879-5:2007-10	Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN 60247:2004	Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
DIN EN ISO 8986-2:2010-04	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 62631-1 : 2011	DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL (IEC 62631-1:2011)
EN 60455-2:2015	Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
NBR IEC/TR 62039 : 2010	SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS
BS 4935:1989	Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
BS 7008-1(1994) : AMD 8821	ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

IEC 60093:1980

Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Shopping Cart

IEC 60093:1980

Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Category

Subcategory