I.S. EN 764-4:2014
Current
The latest, up-to-date edition.
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Types of technical delivery conditions
5 Content of technical delivery conditions for materials
for pressure equipment
Annex A (normative) - Procedures for the establishment
of European Approvals for pressure equipment
Materials (EAM)
Annex B (normative) - Appraisal schedule for ferritic and
martensitic steels
Annex C (normative) - Appraisal schedule for austenitic
and austenitic-ferritic steels
Annex D (normative) - Appraisal schedule for cast steels
Annex E (normative) - Test programme for welded specimen
after stress relief procedure
Annex F (informative) - Example for Particular Material
Appraisal (PMA) for steel
Annex G (informative) - History of EN 764-4
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 97/23/EC on Pressure Equipment
Bibliography
Provides the requirements,under the regime of the EU Directive 97/23/EC on Pressure Equipment (PED), for the establishment of the technical delivery conditions in the form of: - harmonized European Standard for material; - European approval for material (EAM); - Particular material appraisal,(PMA) for metallic materials for pressure equipment in all product forms.
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 764-4:2014 | Identical |
| BS EN 764-4:2014 | Identical |
| DIN EN 764-4:2015-03 | Identical |
| NBN EN 764-4 : 2015 | Identical |
| NEN EN 764-4 : 2015 | Identical |
| NF EN 764-4 : 2015 | Identical |
| NS EN 764-4 : 2014 | Identical |
| UNE-EN 764-4:2015 | Identical |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
| EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN ISO 3690:2012 | Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012) |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| ISO 6892-1:2016 | Metallic materials — Tensile testing — Part 1: Method of test at room temperature |
| EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| ISO 10052:2004 | Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| ISO 3785:2006 | Metallic materials — Designation of test specimen axes in relation to product texture |
| EN ISO 17642-1:2004 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) |
| EN ISO 3785:2006 | Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels — Micrographic determination of the apparent grain size |
| EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| ISO 3690:2012 | Welding and allied processes — Determination of hydrogen content in arc weld metal |
| ISO 17642-1:2004 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| ISO 6892-2:2011 | Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| ISO 4136:2012 | Destructive tests on welds in metallic materials — Transverse tensile test |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials — General rules |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 204:2009 | Metallic materials — Uniaxial creep testing in tension — Method of test |
| ISO 17642-2:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.