I.S. EN 15287-1:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
Hardcopy , PDF
16-12-2023
English
12-10-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design
5 Installation
6 Commissioning/handover
Annex A (informative) Determination of the chimney designation
for custom-built and relined chimneys
Annex B (informative) List of heating appliance data required
for the design of a chimney
Annex C (informative) Example of a chimney designation
Annex D (informative) Correlation between designation parameters
for clay/ceramic flue liners and clay/ceramic flue blocks
and concrete flue liners and concrete flue blocks
Annex E (informative) Designation of metal system chimneys and
correlation between metal liner material specification
and corrosion load in Member States (MS)
Annex F (informative) Example of typical building structure
designed to assist exchange of information
Annex G (informative) Examples of a chimney plate
Annex H (normative) Determination of a chimney designation for
an installed metal system chimney
Annex I (informative) Example for the determination of the
designation of a relined chimney using a metal flue liner
Annex J (informative) Example for the determination of the
designation of a custom-built chimney using a clay/ceramic
flue liner
Annex K (normative) Determination of the designation for an
installed metal connecting flue pipe
Annex L (informative) Recommendations for inspection, cleaning and
maintenance
Annex M (informative) Location of the chimney outlet
Annex N (informative) Calculating the temperature of adjacent
material
Annex O (informative) Chimney commissioning
Annex P (informative) Useful hints for checking, handling and site
storage of materials and components
Bibliography
Defines the method of specifying the design, installation criteria for system chimneys, construction of custom built chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys.
DevelopmentNote |
Supersedes I.S. EN 12391-1. (10/2007) 2007 Edition Re-issued in September 2010 & incorporates AMD 1 2010. (09/2010)
|
DocumentType |
Standard
|
Pages |
82
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 15287-1:2007+A1:2010 | Identical |
S.R. 325:2013+A2:2018/AC:2019 | RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES IN IRELAND TO EUROCODE 6 |
I.S. 813:2014+A1:2017 | DOMESTIC GAS INSTALLATIONS (EDITION 3) AND AMENDMENT 1:2017 |
I.S. 813:2014 | DOMESTIC GAS INSTALLATIONS (EDITION 3) AND AMENDMENT 1:2017 |
EN 12391-1:2003 | Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
EN 13384-2:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance |
EN 13502:2002 | Chimneys - Requirements and test methods for clay/ceramic flue terminals |
EN 1856-2:2009 | Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes |
EN 13063-1:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance |
EN 13069:2005 | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN 14989-1:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
EN 13384-3:2005 | Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
EN 12446:2011 | Chimneys - Components - Concrete outer wall elements |
EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
EN 13063-2:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions |
EN 1806:2006 | Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods |
EN 1858:2008+A1:2011 | Chimneys - Components - Concrete flue blocks |
CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
EN 1993-3-2:2006 | Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys |
EN 1443:2003 | Chimneys - General requirements |
EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
EN 14297:2004 | Chimneys - Freeze-thaw resistance test method for chimney products |
EN 1857:2010 | Chimneys - Components - Concrete flue liners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.