I.S. EN 14163:2002
Current
The latest, up-to-date edition.
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES
Hardcopy , PDF
English
01-01-2002
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Explanary Note
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Welding procedure specification testing and approval
6 Approval and testing of welders and welding operators
7 Production welding
8 Non-destructive examination
9 Acceptance criteria for non-destructive examination
10 Repair and removal of defects
11 Documentation
Annex A (informative) Hyperbaric welding
Annex B (informative) Special requirements for welding
of CRA-clad steel and CRA pipelines
Annex C (informative) Recommendations for brazing and
aluminothermic welding of anode leads
Annex D (informative) Examples of NDE examination reports
Annex ZA (normative) Normative references to international
publications with their European publication
correspondence
Bibliography
Determines the requirements for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems for the petroleum and natural gas industries meeting the requirements of ISO 13623.
| DevelopmentNote |
COR 2006 Issued on 15/08/2010. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 14163 : 2001 AC 2006 | Identical |
| NBN EN 14163 : 2002 COR 2006 | Identical |
| DIN EN 14163:2002-09 | Equivalent |
| BS EN 14163:2001 | Identical |
| NF EN 14163 : 2002 | Identical |
| NEN EN 14163 : 2002 C1 2006 | Identical |
| ISO 13847:2013 | Identical |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
| ISO 9935:1992 | Non-destructive testing — Penetrant flaw detectors — General technical requirements |
| ISO 6520-1:2007 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| ISO 9712:2012 | Non-destructive testing — Qualification and certification of NDT personnel |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN 27963 : 1992 | SPECIFICATION FOR CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| EN ISO 6947:2011 | Welding and allied processes - Welding positions (ISO 6947:2011) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 3453:1984 | Non-destructive testing — Liquid penetrant inspection — Means of verification |
| ISO 3452:1984 | Non-destructive testing — Penetrant inspection — General principles |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 857-1:1998 | Welding and allied processes — Vocabulary — Part 1: Metal welding processes |
| EN 876:1995 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ISO 4136:2012 | Destructive tests on welds in metallic materials — Transverse tensile test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 1106-3:1984 | Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
| EN 1043-1:1995 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| ISO 6947:2011 | Welding and allied processes — Welding positions |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.