EN 795:2012
Current
Current
The latest, up-to-date edition.
Personal fall protection equipment - Anchor devices
Published date
25-07-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) - Information on installation
documentation and periodic examination
Annex B (informative) - Significant technical changes
between this European Standard and the previous
edition EN 795:1996 and EN 795:1996/A1:2001
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 89/686/EEC
Bibliography
This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.This European Standard also gives requirements for marking and instructions for use, and guidance on installation. This European Standard is not applicable to:-anchor devices intended to allow more than one user to be attached at any one time;-anchor devices used in any sports or recreational activity;-equipment designed to conform to EN 516 or EN 517;-elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;-structural anchors (see 3.3).
| Committee |
CEN/TC 160
|
| DevelopmentNote |
Supersedes PREN 795. (08/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 795:2012 | Identical |
| NS EN 795 : 2012 | Identical |
| UNE-EN 795:1997 | Identical |
| DIN EN 795:2012-10 | Identical |
| NBN EN 795 : 2012 | Identical |
| NF EN 795 : 2016 | Identical |
| I.S. EN 795:2012 | Identical |
| SN EN 795:2012 | Identical |
| UNE-EN 795:2012 | Identical |
| PN EN 795 : 2012 | Identical |
| UNI EN 795 : 2012 | Identical |
| NEN EN 795 : 2012 | Identical |
| PNE-EN 795 | Identical |
| 18/30366946 DC : 0 | BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| S.R. CEN/TS 16415:2013 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES - RECOMMENDATIONS FOR ANCHOR DEVICES FOR USE BY MORE THAN ONE PERSON SIMULTANEOUSLY |
| 02/710681 DC : DRAFT SEP 2002 | BS EN 14502-1 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| 14/30299187 DC : 0 | BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT |
| 08/30184292 DC : DRAFT SEP 2008 | BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| CEN/TS 16415:2013 | Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously |
| 10/30234333 DC : DRAFT DEC 2010 | BS EN 12561-7 - RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| 08/30176477 DC : DRAFT APR 2008 | BS EN 14502-1 - CRANES - EQUIPMENT FOR LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| 04/30126149 DC : 0 | EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY |
| PREN 1909 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| DIN EN 12561-7:2011-10 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| BS EN ISO 14122-4:2016 | Safety of machinery. Permanent means of access to machinery Fixed ladders |
| BS EN 517:2006 | Prefabricated accessories for roofing. Roof safety hooks |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNE-EN ISO 14122-4:2017 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| DIN EN 1496:2017-03 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| EN 12561-7:2011 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| I.S. EN 363:2008 | PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
| CEI EN 50308 : 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| PREN 1496 : DRAFT 2015 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| DD ISO/TS 3691-7:2011 | Industrial trucks. Safety requirements and verification Regional requirements for countries within the European Community |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| BS EN 16851:2017 | Cranes. Light crane systems |
| PREN 16307-3 : DRAFT 2017 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 3: SUPPLEMENTARY REQUIREMENTS FOR TRUCKS WITH ELEVATING OPERATOR POSITION AND TRUCKS SPECIFICALLY DESIGNED TO TRAVEL WITH ELEVATED LOADS (ADDITIONAL REQUIREMENTS TO EN 16307-1) |
| UNE-EN 1993-3-1:2013 | Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts |
| PREN 17206 : DRAFT 2018 | ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 363:2016-05 (Draft) | PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 13107:2015-09 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| UNE-EN 1496:2018 | Personal fall protection equipment - Rescue lifting devices |
| DIN EN 14502-1:2010-11 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 12561-7:2011 | Railway applications. Tank wagons Platforms and ladders |
| BS EN 12312-6:2017 | Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment |
| UNE-EN ISO 14122-2:2017 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| I.S. EN 619:2002 | |
| I.S. EN 13796-1:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
| I.S. EN 1909:2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 1808:2015 | SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS |
| I.S. EN ISO 14122-4:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS (ISO 14122-4:2016) |
| I.S. EN 12312-6:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT |
| DIN EN 13796-1:2006-01 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
| I.S. EN ISO 14122-2:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS (ISO 14122-2:2016) |
| I.S. EN 517:2006 | PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 617:2001 | |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 13107:2015 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
| I.S. EN 12561-7:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| I.S. EN 516:2006 | PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS |
| I.S. EN 1496:2017 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 14122-3:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS (ISO 14122-3:2016) |
| I.S. EN ISO 14122-1:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS (ISO 14122-1:2016) |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 14502-1:2010 | CRANES - EQUIPMENT FOR LIFTING PERSONS - PART 1: SUSPENDED BASKETS |
| I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| NF EN 619 : 2003 + A1 2010 | |
| VDI 3564 Blatt 1:2017-05 | Fire protection - Recommendations for high-bay warehouses |
| DIN EN 1993-3-1:2010-12 | Eurocode 3: Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts (includes Corrigendum AC:2009) |
| 17/30364335 DC : 0 | BS EN 1009-3 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR CRUSHING AND MILLING MACHINERY |
| PREN 360 : DRAFT 2016 | PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
| BS EN 50308:2004 | Wind turbines. Protective measures. Requirements for design, operation and maintenance |
| I.S. EN ISO 11111-2:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES |
| 13/30277460 DC : 0 | BS EN 1909 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| PREN 363 : DRAFT 2016 | PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
| 96/104565 DC : JUN 96 | EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS |
| 12/30260955 DC : 0 | BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| ANSI Z245.1 : 2017 | MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| I.S. EN 50308:2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| UNI EN 363 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
| UNE-EN 14502-1:2010 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| DIN EN 1496:2015-07 (Draft) | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| DIN EN 1808:2015-08 | SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS |
| DIN EN 1909:2013-04 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
| BS EN 14502-1:2010 | Cranes. Equipment for the lifting of persons Suspended baskets |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| UNI EN 619 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS |
| EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
| UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| UNI EN 14502-1 : 2010 | CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS |
| UNI EN 12561-7 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 7: PLATFORMS AND LADDERS |
| 13/30291705 DC : 0 | BS EN ISO 14122-3 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS |
| UNE-EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| PREN 474-10 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS |
| 15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
| 13/30291003 DC : 0 | BS EN ISO 14122-2 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS |
| 05/30134192 DC : DRAFT MAY 2005 | EN 516 - PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 14/30290999 DC : 0 | BS EN ISO 14122-1 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS OF ACCESS BETWEEN TWO LEVELS |
| BS EN 1993-3-1:2006 | Eurocode 3. Design of steel structures Towers, masts and chimneys |
| 11/30236557 DC : 0 | BS EN 16228-2 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING |
| 97/105385 DC : DRAFT JULY 1997 | PREN 12951 - PREFABRICATED ACCESSORIES FOR ROOFING - PERMANENTLY FIXED ROOF LADDERS |
| UNI CEN/TS 16415 : 2013 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES - RECOMMENDATIONS FOR ANCHOR DEVICES FOR USE BY MORE THAN ONE PERSON SIMULTANEOUSLY |
| UNI EN 1993-3-1 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 363:2008 | Personal fall protection equipment. Personal fall protection systems |
| 17/30354229 DC : 0 | BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| PREN 17109 : DRAFT 2017 | ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
| EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
| DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
| BS EN 1496:2017 | Personal fall protection equipment. Rescue lifting devices |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 11111-2:2005 | Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines |
| UNE-EN ISO 14122-1:2017 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| BS EN ISO 14122-3:2016 | Safety of machinery. Permanent means of access to machinery Stairs, stepladders and guard-rails |
| BS EN 13107:2015 | Safety requirements for cableway installations designed to carry persons. Civil engineering works |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 619 : 2002 | |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| UNE-EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| UNE-EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| BS EN 1909:2017 | Safety requirements for cableway installations designed to carry persons. Recovery and evacuation |
| BS EN 13796-1:2005 | Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| UNE 180201:2016 | Formwork. General Design, performance requirements and verifications |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| UNE-EN 619:2003 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads. |
| UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
| BS EN 1808:2015 | Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| BS EN 516:2006 | Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps |
| UNE-EN 12561-7:2012 | Railway applications - Tank wagons - Part 7: Platforms and ladders |
| UNE-EN ISO 14122-3:2017 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| DIN EN 13796-1:2012-06 (Draft) | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS |
| EN 1808:2015 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| EN 14502-1:2010 | Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 516:2006 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| EN 517:2006 | Prefabricated accessories for roofing - Roof safety hooks |
| EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
| UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
| PD CEN/TS 16415:2013 | Personal fall protection equipment. Anchor devices. Recommendations for anchor devices for use by more than one person simultaneously |
| 15/30323348 DC : 0 | BS EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| 03/103083 DC : DRAFT FEB 2003 | EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| 16/30339214 DC : 0 | BS EN 363 - PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS |
| 16/30332882 DC : 0 | BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS |
| DIN EN 619:2011-02 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010) |
| I.S. EN 1993-3-1:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS (INCLUDING IRISH NATIONAL ANNEX) |
| UNE-EN 1808:2016 | Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
| BS EN ISO 14122-2:2016 | Safety of machinery. Permanent means of access to machinery Working platforms and walkways |
| BS EN ISO 14122-1:2016 | Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access |
| BS EN ISO 11111-2 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 2: SPINNING PREPARATORY AND SPINNING MACHINES (ISO 11111-2:2005) |
| BS EN 617 : 2001 | |
| DIN EN 516:2006-04 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN 50308 : 2004 COR 2005 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| DIN EN 517:2006-05 | Prefabricated accessories for roofing - Roof safety hooks |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
| EN 517:2006 | Prefabricated accessories for roofing - Roof safety hooks |
| EN 360:2002 | Personal protective equipment against falls from a height - Retractable type fall arresters |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 892:2012+A1:2016 | Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods |
| ISO 2232:1990 | Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications |
| EN 363:2008 | Personal fall protection equipment - Personal fall protection systems |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 516:2006 | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| EN 362:2004 | Personal protective equipment against falls from a height - Connectors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.