EN 1426:2015
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Bitumen and bituminous binders - Determination of needle penetration
Withdrawn date
31-01-2016
Published date
01-07-2015
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sampling
7 Procedure
8 Expression of results
9 Precision
10 Test report
Annex A (informative) - Characteristics of thermometers
Bibliography
This European Standard specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to 330 × 0,1 mm, but for penetrations above this value, up to 500 × 0,1 mm, different operating parameters are necessary.WARNING — Use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
CEN/TC 336
|
| DevelopmentNote |
Supersedes PREN 1426. (07/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NBN EN 1426 : 2015 | Identical |
| SN 670511 : 2016 | Identical |
| NF EN 1426 : 2018 | Identical |
| NEN EN 1426 : 2015 | Identical |
| SN EN 1426:2016 | Identical |
| DIN EN 1426:2015-09 | Identical |
| UNE-EN 1426:2015 | Identical |
| BS EN 1426:2015 | Identical |
| BS 2000-49(2015) : 2015 | Identical |
| I.S. EN 1426:2015 | Identical |
| IP 49:2016 | Identical |
| SS-EN 1426 : 2015 | Identical |
| IP 49 : 2007 | Identical |
| NS EN 1426 : 1999 | Identical |
| PN EN 1426 : 2015 | Identical |
| UNI EN 1426 : 2007 | Identical |
| UNI EN 1426:2015 | Identical |
| 13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 12607-1:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS 2000-460.3(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| 00/100955 DC : DRAFT MAR 2000 | BS EN 13108-6 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| 13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| 13/30278729 DC : 0 | BS EN 13108-3 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| ONORM EN 12697-12 : 2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
| DIN EN 15819:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| 11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
| DIN EN 15381:2008-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 02/703683 DC : DRAFT FEB 2002 | |
| 13/30278711 DC : 0 | BS EN 13108-4 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 13/30278723 DC : 0 | BS EN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| UNE-EN 13924-1:2016 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| 00/106660 DC : DRAFT OCT 2000 | PREN 13924 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| CEI 20-95 : 2010 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| 05/30138288 DC : DRAFT AUG 2005 | EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| PREN 12607-2 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| PREN 12607-1 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| I.S. HD 631.2:2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| HD 631.2 : 2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| I.S. EN 15381:2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| DIN EN 13304:2009-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| DIN EN 13305:2009-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
| BS EN 14733 : 2005 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| BS EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| BS EN 13108-21:2016 | Bituminous mixtures. Material specifications Factory Production Control |
| EN 13305:2009 | Bitumen and bituminous binders - Framework for specification of hard industrial bitumens |
| EN 12607-3:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 13303:2017 | Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 13304:2009 | Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| 11/30250572 DC : 0 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| BS EN 13924-2:2014 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Multigrade paving grade bitumens |
| BS 2000-506(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| BS 2000-460.1(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - RFTOT METHOD |
| DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| PREN 13108-3 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| 07/30170907 DC : DRAFT AUG 2007 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| 13/30278705 DC : 0 | BS EN 13108-9 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN-LAYERS (AUTL) |
| PREN 13108-7 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| 01/105972 DC : DRAFT JULY 2001 | BS EN 14023 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR POLYMER MODIFIED BITUMENS |
| BS EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried |
| 16/30326281 DC : 0 | BS EN 13399 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| 13/30278726 DC : 0 | BS EN 13108-7 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| PREN 13108-2 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| PREN 13108-8 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| UNI EN 13924-2 : 2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| I.S. EN 12697-12:2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
| BS 2000-460-2(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| 18/30368690 DC : 0 | BS EN 13108-31 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| I.S. EN 13399:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| DIN EN 12697-3:2013-08 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 13304:2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
| I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 13305:2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| I.S. EN 12607-2:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| I.S. EN 12591:2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 13108-21:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| I.S. EN 12607-3:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| I.S. EN 13808:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 13303:2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| DIN EN 12697-11:2012-07 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| DIN EN 12591:2009-08 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 12697-4:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 4: BITUMEN RECOVERY: FRACTIONATING COLUMN |
| DIN 30674-3:2001-03 | SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING |
| 13/30255328 DC : 0 | BS EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| DIN EN 13924-2:2014-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| DIN EN 12697-12:2015-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
| 02/103564 DC : DRAFT AUG 2002 | PREN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| PREN 13108-4 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 13/30278714 DC : 0 | BS EN 13108-8 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| 00/101067 DC : DRAFT JAN 2000 | BS EN 13808 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMEN EMULSIONS |
| IP 460-1 : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| BS 2000-460.2(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| PREN 13399 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| NF EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
| BS 2000-517(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-517: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| UNE-EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| UNI EN 12697-12 : 2008 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 12: DETERMINATION OF THE WATER SENSITIVITY OF BITUMINOUS SPECIMENS |
| UNE-EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| DIN EN 13880-2:2003-11 | HOT APPLIED JOINT SEALANTS - PART 2: TEST METHOD FOR THE DETERMINATION OF CONE PENETRATION AT 25 DEGREES C |
| DIN EN 13808:2013-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| DIN EN 12607-3:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
| DIN EN 12697-4:2015-09 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| UNE-EN 14733:2006 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| EN 14260:2003 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products : road tars - Characteristics and test methods |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| UNI EN 12607-2 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| UNI EN 14733 : 2010 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| UNI EN 13808 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| UNI EN 13304 : 2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF OXIDISED BITUMENS |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| UNI EN 12697-3 : 2013 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 3: BITUMEN RECOVERY: ROTARY EVAPORATOR |
| UNI EN 12607-3 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| UNI EN 12607-1 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| UNI EN 13305 : 2009 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFICATION OF HARD INDUSTRIAL BITUMENS |
| UNI EN 12591 : 2009 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| UNI EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 05/30138291 DC : DRAFT AUG 2005 | EN 12607-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS 2000-460.1(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| PREN 13108-21 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| PREN 13108-6 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| 13/30255319 DC : 0 | BS EN 12607-2 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS 2000-517(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| 05/30138294 DC : DRAFT AUG 2005 | EN 12607-3 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| 13/30278732 DC : 0 | BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| 04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
| BS 7933-2:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications |
| BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
| 13/30278720 DC : 0 | BS EN 13108-6 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| I.S. EN 13924-2:2014 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 2: MULTIGRADE PAVING GRADE BITUMENS |
| BS EN 12697-12:2008 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the water sensitivity of bituminous specimens |
| I.S. EN 15819:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| DIN EN 12607-1:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| DIN EN 12607-2:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 2: TFOT METHOD |
| BS EN 12697-11:2012 | Bituminous mixtures. Test methods for hot mix asphalt Determination of the affinity between aggregate and bitumen |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
| BS EN 13305:2009 | Bitumen and bituminous binders. Framework for specification of hard industrial bitumens |
| BS EN 13880-2:2003 | Hot applied joint sealants Test method for the determination of cone penetration at 25°C |
| UNE-EN 12607-1:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| BS EN 13880-3:2003 | Hot applied joint sealants Test method for the determination of penetration and recovery (resilience) |
| BS EN 13304:2009 | Bitumen and bituminous binders. Framework for specification of oxidised bitumen |
| BS EN 12607-1:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RTFOT method |
| BS EN 13303:2017 | Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen |
| UNE-EN 12607-3:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 3: RFT method |
| UNE-EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
| EN 12697-11:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| I.S. EN 12697-11:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| BS EN 12970:2000 | Mastic asphalt for waterproofing. Definitions, requirements and test methods |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| UNI EN 12697-11 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN |
| BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
| BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
| BS EN 12697-4:2005 | Bituminous mixtures. Test methods for hot mix asphalt Bitumen recovery. Fractionating column |
| BS EN 13108-8:2016 | Bituminous mixtures. Material specifications Reclaimed asphalt |
| UNE-EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| BS EN 13179-2:2000 | Test for filler aggregate used in bituminous mixtures Bitumen number |
| BS EN 12607-3:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RFT method |
| UNE-EN 12607-2:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| EN 14733:2005+A1:2010 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 13880-2:2003 | Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C |
| EN 13880-3:2003 | Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience) |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| 13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| EN 13399:2017 | Bitumen and bituminous binders - Determination of storage stability of modified bitumen |
| PREN 12607-3 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| I.S. EN 13108-8:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 8: RECLAIMED ASPHALT |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| IP 517 : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF STORAGE STABILITY OF MODIFIED BITUMEN |
| 11/30250578 DC : 0 | BS EN 13808 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| UNE-EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| 05/30138350 DC : DRAFT AUG 2005 | EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUTBACK AND FLUXED BITUMINOUS BINDERS |
| BS 2000-506(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-506: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMENS |
| I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| BS 2000-506(2017) : 2017 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| 13/30255313 DC : 0 | BS EN 12607-3 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| 13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| 16/30326272 DC : 0 | BS EN 13303 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE LOSS IN MASS AFTER HEATING OF INDUSTRIAL BITUMEN |
| BS EN 15381:2008 | Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays |
| 02/103376 DC : DRAFT MAY 2002 | PREN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS |
| BS 2000-460-1(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| PREN 12591 : DRAFT 2016 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR PAVING GRADE BITUMENS |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS 2000-460-3(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 3: RFT METHOD |
| BS EN 13399:2017 | Bitumen and bituminous binders. Determination of storage stability of modified bitumen |
| UNI EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| PREN 13108-31 : DRAFT 2018 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 31: ASPHALT CONCRETE WITH BITUMINOUS EMULSION |
| BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
| BS EN 14260:2003 | Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Road tars. Characteristics and test methods |
| BS EN 12607-2:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air TFOT method |
| BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| EN 12607-2:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 12970:2000 | Mastic asphalt for waterproofing - Definitions, requirements and test methods |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 13179-2:2000 | Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| DIN EN 13880-3:2003-09 | Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience) |
| DIN EN 14733:2010-12 | BITUMEN AND BITUMINOUS BINDERS - BITUMINOUS EMULSIONS, FLUXED AND CUT-BACK BITUMEN FACTORY PRODUCTION CONTROL |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| DIN EN 14260:2003-12 | Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Road tars - Characteristics and test methods; German version EN 14260:2003 |
| EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 1425:2012 | Bitumen and bituminous binders - Characterization of perceptible properties |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 12597:2014 | Bitumen and bituminous binders - Terminology |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.