BS EN 13749:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
Hardcopy , PDF
31-03-2021
English
30-04-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Technical specification
5 Verification of the design data
6 Validation and acceptance of the design
7 Quality requirements
Annex A (informative) Symbols and units used in the
informative annexes
Annex B (informative) - Load cases
Annex C (informative) - Loads due to bogie running
Annex D (informative) - Loads due to components attached
to the bogie frame
Annex E (informative) - Analysis methods and acceptance
criteria
Annex F (informative) - Examples of static test programmes
Annex G (informative) - Examples of fatigue test programmes
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2008/57/EC
Bibliography
Describes the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements.
| Committee |
RAE/3
|
| DevelopmentNote |
Supersedes 99/716338 DC. (05/2005) Supersedes 08/30180826 DC. (04/2011)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this European Standard, these terms are taken to include all functional attachments, e.g. damper brackets.
| Standards | Relationship |
| UNE-EN 13749:2012 | Identical |
| NF EN 13749 : 2011 | Identical |
| EN 13749:2011 | Identical |
| NBN EN 13749 : 2011 | Identical |
| NS EN 13749 : 2011 | Identical |
| NEN EN 13749 : 2011 | Identical |
| SN EN 13749 : 2011 | Identical |
| DIN EN 13749:2011-06 | Identical |
| UNI EN 13749 : 2011 | Identical |
| I.S. EN 13749:2011 | Identical |
| ONORM EN 13749 : 2011 | Identical |
| RSSB GM/RT2400 : ISSUE 5 AMD 1 2014 | ENGINEERING DESIGN OF ON-TRACK MACHINES IN RUNNING MODE |
| RSSB GM/RT2100 : ISSUE 5 | REQUIREMENTS FOR RAIL VEHICLE STRUCTURES |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 15085-1:2007+A1:2013 | Railway applications - Welding of railway vehicles and components - Part 1: General |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| 2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
| EN 15085-5:2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
| EN 12082:2017 | Railway applications - Axleboxes - Performance testing |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| VDV 152 : 2016 | RECOMMENDATIONS ON THE DESIGN FOR STRENGTH OF URBAN RAIL ROLLING STOCK ACCORDING TO BOSTRAB |
| UIC 510-3 : 1989 REPRINT 1994 | WAGONS - STRENGTH TESTING OF 2 AND 3-AXLE BOGIES ON TEST RIG |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
| UIC 615-4 : 2ED 2003 | MOTIVE POWER UNITS - BOGIES AND RUNNING GEAR - BOGIE FRAME STRUCTURE STRENGTH TESTS |
| EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
| EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
| EN 12663-2:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
| EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| NFF 01 301 : 1988 | ROLLING STOCK - MASSES AND LOAD STATES OF POWERED VEHICLES AND COACHES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.