BS EN 13108-1:2016
Current
The latest, up-to-date edition.
Bituminous mixtures. Material specifications Asphalt Concrete
Hardcopy , PDF
English
30-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration
or the softening point of the binder of a mixture
when reclaimed asphalt is used
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Describes requirements for mixtures of the mix group Asphalt Concrete for use on roads, airfields and other trafficked areas.
| Committee |
B/510/1
|
| DevelopmentNote |
Supersedes 01/103249 DC (07/2006) Together with BS EN 13108-7, it supersedes BS 4987-1(2005). (12/2009) Supersedes 13/30278708 DC. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for use on roads, airfields and other trafficked areas. Asphalt Concrete is used for surface courses , binder courses , regulating courses , and bases. The mixtures of the mix group Asphalt Concrete are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN13108‑20 and EN13108‑21 .
| Standards | Relationship |
| NF EN 13108-1 : 2007 | Identical |
| I.S. EN 13108-1:2016 | Identical |
| DIN EN 13108-1:2013-06 (Draft) | Identical |
| UNE-EN 13108-1:2008 | Identical |
| NS EN 13108-1 : 2006 | Identical |
| UNI EN 13108-1 : 2006 | Identical |
| EN 13108-1:2016 | Identical |
| NEN EN 13108-1 : 2016 | Identical |
| NBN EN 13108-1 : 2016 | Identical |
| 13/30284071 DC : 0 | BS 7533-102 - PAVEMENTS CONSTRUCTED WITH CLAY, NATURAL STONE OR CONCRETE PAVING UNITS - PART 102: CODE OF PRACTICE FOR THE CONSTRUCTION AND MAINTENANCE OF PAVEMENTS USING MODULAR PAVING UNITS |
| 10/30213884 DC : 0 | BS 594987 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING AND COMPACTION AND TYPE TESTING PROTOCOLS |
| BS 594987:2007 | Asphalt for roads and other paved areas - Specification for transport, laying and compaction and type testing protocols. |
| PD 6692:2018 | Asphalt. Guidance on the use of BS EN 12697 “Bituminous mixtures. Test methods” |
| 14/30283621 DC : 0 | PD 6691:2015 - GUIDANCE ON THE USE OF BS EN 13108 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| 14/30283618 DC : 0 | BS 594987:2015 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING, COMPACTION AND PRODUCT TYPE TESTING PROTOCOLS |
| BS 7533-10:2010 | Pavements constructed with clay, natural stone or concrete pavers Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks |
| BS 594987:2010 | Asphalt for roads and other paved areas. Specification for transport, laying, compaction and type testing protocols |
| 07/30154860 DC : DRAFT JAN 2007 | BS 4987-2 - ASPHALT FOR ROADS AND OTHER PAVED AREAS - SPECIFICATION FOR TRANSPORT, LAYING AND COMPACTION AND DESIGN PROTOCOLS |
| 17/30360424 DC : 0 | BS PD 6692 - ASPHALT - GUIDANCE ON THE USE OF BS EN 12697 'BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT' |
| PD 6692:2006 | Asphalt. Guidance on the use of BS EN 12697 \'Bituminous mixtures. Test methods for hot mix asphalt\' |
| PD 6691:2010 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS PD6691(2015) : 2015 | GUIDANCE ON THE USE OF BS EN 13108, BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| PD 6691:2007 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
| EN 12697-34:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test |
| EN 12697-46:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
| EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
| EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 12697-25:2016 | Bituminous mixtures - Test methods - Part 25: Cyclic compression test |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| EN 13924-2:2014 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12697-45:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 12697-24:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 12697-16:2016 | Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12697-44:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.