BS 5628-3:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Code of practice for the use of masonry Materials and components, design and workmanship
Hardcopy , PDF
30-03-2010
BS EN 1996-3:2006
BS EN 1996-2:2006
PD 6697:2010
BS EN 1996-1-2:2005
English
31-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and components
4.1 General
4.2 Masonry units
4.3 Materials for mortar
4.4 Wall ties
4.5 Metal support and restraint components
4.6 Reinforcement
4.7 Damp-proof courses (d.p.c.s), including cavity trays
4.8 Sealants
4.9 Airbricks, gratings and flues
4.10 Sills
4.11 Lintels
4.12 Copings
4.13 Flashings and weatherings
4.14 Insulation products
5 Design
5.1 General
5.2 Design for stability
5.3 Structural detailing for stability
5.4 Movement in masonry
5.5 Exclusion of water
5.6 Durability
5.7 Mortars
5.8 Fire resistance
5.9 Thermal performance
5.10 Sound control
5.11 Masonry bonds and other constructional details
Annex A (normative) Workmanship on building sites - Code of
practice for masonry
A.1 Introduction
A.2 Scope
A.3 Definitions
A.4 Materials, handling and preparation
A.5 Brick and/or block walling
Annex B (informative) Determination of movement in masonry
B.1 General
B.2 Determination of total movement within a wall
B.3 Determination of spacing and widths of movement joints
B.4 Thermal movement
B.5 Moisture movement
B.6 Movement due to carbonation
Annex C (informative) Joint finishes
Annex D (informative) Appearance of bricks, and of facing brick
and block masonry
D.1 General guidance on the appearance of bricks
D.2 Assessment of the visual acceptability of facing
bricks
D.3 Assessment of the visual acceptability of aggregate
concrete block masonry
Annex E (informative) Checklist for ordering clay and calcium
silicate bricks
Bibliography
Figures
Tables
Provides general recommendations for the design, construction and workmanship of masonry, including materials and components and the main aspects of design, other than structural, which is covered by BS 5628-1 and -2.
| Committee |
B/525/6
|
| DevelopmentNote |
Supersedes BS 5628-3(2001) & 05/30131954 DC (01/2006)
|
| DocumentType |
Standard
|
| Pages |
136
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| BS EN 1015-11:1999 | Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
| BS EN 771-5 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
| BS 8298:1994 | Code of practice for design and installation of natural stone cladding and lining |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS 8004:1986 | Code of practice for foundations |
| BS EN 771-3 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
| BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
| BS EN 13139:2013 | Aggregates for mortar |
| BS EN 988:1997 | Zinc and zinc alloys. Specification for rolled flat products for building |
| BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS 6100-5:2009 | Building and civil engineering. Vocabulary Civil engineering. Water engineering, environmental engineering and pipe lines |
| BS EN 413-1:2011 | Masonry cement Composition, specifications and conformity criteria |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS EN 771-4 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
| BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| BS 8221-1:2000 | Code of practice for cleaning and surface repair of buildings Cleaning of natural stones, brick, terracotta and concrete |
| BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
| BS 1186-2:1988 | Timber for and workmanship in joinery Specification for workmanship |
| BS EN 13164 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| BS 8000-2.2:1990 | Workmanship on building sites. Code of practice for concrete work Sitework with in situ and precast concrete |
| BS EN ISO 11600 : 2003 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - CLASSIFICATION AND REQUIREMENTS FOR SEALANTS |
| BS 5262:1991 | Code of practice for external renderings |
| BS 5977-1:1981 | Lintels Method for assessment of load |
| BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
| BS EN 845-3 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
| BS 8104:1992 | Code of practice for assessing exposure of walls to wind-driven rain |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS EN 1052-1:1999 | Methods of test for masonry Determination of compressive strength |
| BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
| BS EN 450-1:2012 | Fly ash for concrete Definition, specifications and conformity criteria |
| BS 3837-1:2004 | Expanded polystyrene boards Boards and blocks manufactured from expandable beads. Requirements and test methods |
| BS PAS 70(2003) : 2003 | HD CLAY BRICKS - GUIDE TO APPEARANCE AND SITE MEASURED DIMENSIONS AND TOLERANCE |
| BS EN 12620:2013 | Aggregates for concrete |
| BS EN 459-1:2015 | Building lime Definitions, specifications and conformity criteria |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6150:1991 | Code of practice for painting of buildings |
| BS EN 12588:2006 | Lead and lead alloys. Rolled lead sheet for building purposes |
| BS EN 998-1:2016 | Specification for mortar for masonry Rendering and plastering mortar |
| BS 6461-1:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes |
| BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
| BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
| BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
| BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS 8215:1991 | Code of practice for design and installation of damp-proof courses in masonry construction |
| BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| BS 4729(2005) : 2005 | CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS 8000-16(1997) : 1997 | WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS |
| BS 8102:1990 | Code of practice for protection of structures against water from the ground |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
| BS 1197-2:1973 | Specification for concrete flooring tiles and fittings Metric units |
| BS 743:1970 | Specification for materials for damp-proof courses |
| BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| BS 6213(2000) : 2000 | SELECTION OF CONSTRUCTION SEALANTS - GUIDE |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| BS 8221-2:2000 | Code of practice for cleaning and surface repair of buildings Surface repair of natural stones, brick and terracotta |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
| BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
| BS 7979:2001 | Specification for limestone fines for use with Portland cement |
| BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| BS 6925:1988 | Specification for mastic asphalt for building and civil engineering (limestone aggregate) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.