09/30186082 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Superseded date
31-05-2012
Superseded by
$45.84
Including GST where applicable
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Testing and examination
8 Technical requirements for type approval
9 Production testing and examination requirements
10 Marking
11 Certificates
Annex A (normative) - Corrosion tests
Annex B (informative) - Environmental check list
Bibliography
BS EN 13110
| Committee |
PVE/19
|
| DocumentType |
Draft
|
| Pages |
47
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 13110 : DRAFT 2009 | Identical |
| EN 14784-2:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 13152:2001/A1:2003 | SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - SELF CLOSING |
| EN 462-2:1994 | Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value |
| ISO 11114-1:2012 | Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials |
| EN 13153 : 2001 AMD 1 2003 | SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED |
| ISO 10042:2005 | Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| EN 12862:2000 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| ISO 14024:1999 | Environmental labels and declarations — Type I environmental labelling — Principles and procedures |
| EN 719 : 1994 | WELDING COORDINATION - TASKS AND RESPONSIBILITIES |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN ISO 1042:1999 | Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998) |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN 876:1995 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN 462-1:1994 | Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value |
| EN 14784-1:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| EN 14894:2013 | LPG equipment and accessories - Cylinder and drum marking |
| ISO 11116-1:1999 | Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 1: Specifications |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 629-1 : 1996 | TRANSPORTABLE GAS CYLINDERS - 25E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.